Tender For special repair To Assistant Director Of Horticulture Such As cement concrete Road , Compund Wall Raising For The Year Of 26-27
Tender Value
5.50 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
5 days left
EMD
5600
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Assistant Director Of Horticulture Such As cement concrete Road , Compund Wall Raising For The Year Of 26-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed and depositing the excavated materials away from the work site within initial lead & lifts etc. complete as directed by the Engineer in charge. |
| 2 | Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials, cost of all labour and T&P,Cess etc. complete in all respect as per direction by the Engineer in charge. |
| 3 | Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P,Cess etc complete as per the direction of the Engineer -in –charge. |
| 4 | Plain Cement Concrete of proportion (1:2:4) foundation and floors using 12mm size hard black hand broken granite (C.B) chips of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6\\") thick to required level ramming watering curing etc. including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 5 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Column Beam) |
| 6 | Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance of all materials and cost of all labour with all T&P,Cess required for the work etc. complete as directed by the Engineer- in-Charge. |
| 7 | Fly ash brick masonry in all floors with cement mortar (1:6) in using fly ash bricks of “23cmx11cmx8cm\\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 8 | Providing 12 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P, Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 9 | Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel with paint specification being with primer of 5-7 microns and finished paint with polyester paint of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. All corner brackets are to be made of CRCA with zinc phosphating. Glass to be used of 5 mm reflective with cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge |
| 10 | Providing fitting, fixing of Aluminium Door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as bottom and middle member and 6mm black glass in top portion with 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 with Automatic Door closure, 6 Lever mortice Lock, Door Stopper, Handle etc. including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge. |
| 11 | Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 12 | Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge(ISMB 250*150) |
| 13 | Providing, Fitting & Fixing of False Ceiling with 12 mm thick gypsum board, Aluminum anodized T section No -3215 with 2ft center to center L section No-1705 up to 15micron on four walls to be fixed by means of steel screw and PVC plug and Aluminum grid 2'-0\\"x2'-0\\" suspended from ceiling including cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 14 | Painting two coats with approved weather seal paints of approved colour, shade over coat of wall primer including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge.(Ground Floor) |
| 15 | Painting two coats with approved weather seal paints of approved colour, shade over coat of wall primer including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge..(First Floor) |
| 16 | Painting Two coats to walls with distemper to make an even finished surface of approved shade on prepared surface of new works to give a even shade,including sand papering,applying putty wherever necessary & cost of scaffolding,staging charges with cost conveyance royalties of all the materials and all labour with T&P,Cess required for the work etc. (Including cost of distemper) complete in all respect in all floors as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Ground Floor) |
| 17 | Painting Two coats to walls with distemper to make an even finished surface of approved shade on prepared surface of new works to give a even shade,including sand papering,applying putty wherever necessary & cost of scaffolding,staging charges with cost conveyance royalties of all the materials and all labour with T&P,Cess required for the work etc. (Including cost of distemper) complete in all respect in all floors as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(First Floor) |
| 18 | Painting Two coats with any approved Enamel paints of approved colour, shade over new iron work including sand papering, polishing the surface, cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Ground Floor) |
| 19 | Painting Two coats with any approved Enamel paints of approved colour, shade over new iron work including sand papering, polishing the surface, cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(First Floor) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender