Tender For 8. Construction Of R.W Sub-Division Office Building At Badasahi For The Year 2026-27
Tender Value
54.35 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
3 days left
EMD
54351
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 8. Construction Of R.W Sub-Division Office Building At Badasahi For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in foundation in Hard of soil including hard moorum, stoney earth mixed with boulders ( except sheet rocks and boulders requiring blasting) with all leads and lifts including rough dressing the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 2 | CC ROAD |
| 3 | COMPOUND WALL |
| 4 | Exavation of foundation in hard rock of all toughness and boulders above 0.03 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing as per specification of the department including stacking useful stones and disposal of muck manually as directed by the Engineer-in-charge. (Including drilling & blasting) |
| 5 | Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 6 | CC ROAD |
| 7 | COMPOUND WALL |
| 8 | Construction of embackment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works (4th Revision). |
| 9 | Cement Concrete (1:3:6) in foundation and floors using 4cm size black broken granite aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceding 15cm (6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royalty, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer in charge. |
| 10 | CC ROAD |
| 11 | COMPOUND WALL |
| 12 | Cement concrete (1:1.5:3) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete. |
| 13 | CC ROAD |
| 14 | RCC work of M 25 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying.plinth beam |
| 15 | footing |
| 16 | Column |
| 17 | column up to plinth level |
| 18 | HRcolumn |
| 19 | COMPOUND WALLplinth beam |
| 20 | column base |
| 21 | column |
| 22 | Roof beam |
| 23 | Lintel |
| 24 | Roof slab |
| 25 | Stair case |
| 26 | Chhaja |
| 27 | Providing HYSD bars including cutting, bending, binding and tying the grills and placing in position including cost, conveyance and royalty of all materials and cost of all labour etc. complete |
| 28 | COMPOUND WALL |
| 29 | Fly ash masonary with C.M (1:6) in foundation and plinth including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge. |
| 30 | COMPOUND WALL |
| 31 | Fly ash Brick masonary with C.M (1:6) in Superstructure including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge. |
| 32 | COMPOUND WALL |
| 33 | 20mm thick cement plaster in C.M (1:4) including punning over walls, finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the |
| 34 | Coal taring two coats including cost of coal tar and tar paper with all cost, conveyance, labour, T&P and cess etc. complete as per specifications and direction of the Engineer-in-charge |
| 35 | 16mm thick inside plastering with cement mortar(1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge. |
| 36 | 12mm thick outside Plastering with cement mortar (1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge. |
| 37 | COMPOUND WALL |
| 38 | 2.5 cm. thick grading concrete (1:2:2) on roof slab with 6mm. size hard granite chips on new work.(HR) |
| 39 | Supplying, fitting and fixing of Vetrified tile of size 60cm x 60cm in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge. |
| 40 | Supplying, fitting and fixing of Vitrified tile (In dados / skirting) of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge. |
| 41 | Supplying, fitting and fixing of Ceramic tile (In dados / skirting) of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge. |
| 42 | Providing and fixing Ceramic tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 43 | Providing and fixing Granite tiles of in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing with cost carriage royalty of all materials etc. complete. as directed by the Engineer-in-charge. |
| 44 | Providing and fixing Chequred tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 45 | Finishing walls with weather seal coat (two coats) over a coat of cement primer to outer walls surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer in Charge. |
| 46 | COMPOUND WALL |
| 47 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint |
| 48 | Distempering two coats over interior wall surface with Distemper of approved shade including cost and conveyance of all materials to site and all lobour charges complete as per direction of E.I.C. |
| 49 | Finishing wall surface of wall with Acrylic Wall Putty (Water based) of approved make and finished smooth and even surface to receive painting including cost conveyance and royalties of all materials etc complete as per direction of the Engineer in Charge. |
| 50 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge. |
| 51 | Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C. |
| 52 | COMPOUND WALL |
| 53 | Labour for fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 54 | COMPOUND WALL |
| 55 | Supplying and fitting-fixing of factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge. |
| 56 | Supplying and fitting-fixing of Un-plasticised poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD) .Casement Window with top fixed- 60-. Series duly manufactured using UPVC reinforced profiles of 60.mm x 55 mm x 2.5mm for outer frames 75 mm x 60 mm x 2.25 mm for casement Door Sash profile and 74 mm x 60 mm x 2.5 mm mullion profile Capable of mounting single glazing system , structurally reinforced with hot dip. galvanised lipto 50 microns of minimum thickness of • 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed. with EPDM weathering seal resistant accessories like clipping locking system made of alurninimum I No, per set of sashes and the system is to be installed at the site using anchor fasteners I, silicon rubber sealant easy glazingidegtazing at site etc, including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASDM.D 638-14, EN 477-95 |
| 57 | Supplying and fitting-fixing of factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 58 | Painting two coats over wood and iron work with approved Enamel paint over a coat of priming including cost and conveyance of all materials to site and all labour charges complete as per direction of E.I.C. |
| 59 | COMPOUND WALL |
| 60 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 61 | Providing fitting fixing of RCC ventilator of size 0.45 m X 0.30 m including all cost conveyance etc. completed. |
| 62 | Providing and fixing rain water down pipe with necessary bend shoes and heads including cost of 75mm dia earthen pipe, clamps and nails etc. with all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge (HR) |
| 63 | PH'Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.1st depth- |
| 64 | 2nd depth-ST- |
| 65 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge |
| 66 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 67 | Supplying all materials, labour, T&P and providing cement concrete ( 1:1.5:3 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 68 | Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC. in F& P in cm (1:3) |
| 69 | Supplying all materials labour T&P and providing 12 mm thick cement plaster in C.M. (1:3) on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. 12mm CP(1:3) with Punning |
| 70 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 71 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 72 | Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 73 | Supplying all materials,labour,T&P and providing CC(1:2:4)with 12mm size and HBG chips including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 74 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. |
| 75 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. |
| 76 | Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 77 | Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm) |
| 78 | Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y |
| 79 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 80 | Supplying all labour materials T&P fitting fixing of AL. door frame with OEL Anodized Al. Door section of 9202 as vertcal member,9201 as top member and 9200 as bottom and middle member and 12 mm thick pre-laminated board in bottom portion fixed on door frame by meams of tapered clip NO-4660 and the frame by means of jointing angle NO-185 including all cost of labour ,T&P ,hire charges of drilling machine ,labour etc all complete as per the dir of EICusing high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 81 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast) (a) 110mm dia PVC pipe |
| 82 | 75mm dia PVC pipe |
| 83 | 110mm dia PVC'P' trap |
| 84 | 110mm dia.PVC D/J/D |
| 85 | 110mm dia.PVC H.R.Bend |
| 86 | 110mm dia PVC Door Bend |
| 87 | 110mm dia PVC Plain Bend |
| 88 | 110mm dia PVC offset |
| 89 | 110mm dia PVC Cowl |
| 90 | 75mm dia.PVC Door Bend |
| 91 | 75mm dia PVC Plain Bend |
| 92 | 125mm dia CP greatings |
| 93 | Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC. 250mm to 375mm thick wall |
| 94 | Roof cutting |
| 95 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china footrest etc all complete as per specification and direction of the E.I.C.(Parry ware/ Cera/Hindware Make) 580x440mm orissa pattern Squatting pan (White) |
| 96 | Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) with saet cover attached with flushing cistern (One Piece) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. |
| 97 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C..(Parry ware/ Cera/Hindware Make) |
| 98 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. as per specification and direction of the E.I.C. 500x400mm WHB-(Neycer/ Parry ware/ Cerra/Hindware Make) |
| 99 | Pedestral for WHB |
| 100 | Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. (a)vitrous China-Half Stall wall urinal |
| 101 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Size (760mmx760mmx460mm) |
| 102 | Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing |
| 103 | Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit |
| 104 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 1000 lits capacity on the roof of ground floor |
| 105 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(A) 1000 lits capacity on the roof of ground floor |
| 106 | Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a) 20mm dia C-PVC PVC Pipe (Internal) |
| 107 | 25mm dia (ASTM )PVC Pipe |
| 108 | 15mm dia PVC inlet Connection Pipe |
| 109 | 32mm dia PVC Waste Pipe |
| 110 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. |
| 111 | Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C. |
| 112 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 113 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC.(Amber/Plaza/Prayag/Essco) (a)15mm dia C.P Bib Cock(S.B.) |
| 114 | 15mm dia C.P Twin Bib cock |
| 115 | 15mm dia C.P Health Fuccet |
| 116 | 15mm dia C.P Pillar cock |
| 117 | 15mm dia Angle Stop Cock |
| 118 | 15mm dia CP Wall Mixture (3-in-1) |
| 119 | 15mm dia CP Flange |
| 120 | 15mm dia CP Extension Piece |
| 121 | 25mm dia PVC Ball valve |
| 122 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size (fixed type) |
| 123 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 124 | Glass Self |
| 125 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.(a) 20mmx450mm long CP towel rail |
| 126 | CP Towel ring |
| 127 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower |
| 128 | 125mm dia Tube Well through Calyx Method Labour for drilling perfectly vertical bore holes of specified diameter for a specified depth below ground level through hard and boulder formation by means of Calyx Rigs as required to suit the site condition as per the direction of Engineer-in-Charge including deployment of rig with its accessories, tools and plant, and consumable etc for a finished bore suitable for lowering 125x100mm nominal dia PVC Casing pipes fitted with sockets and with or without well screens as per necessity for the soft and hard formations drilled by combination drilling method. |
| 129 | Labour for lowering the following sizes of PVC Pipes with or without strainers as per necessity and fitted and fixed up in perfectly vertical position including cutting and threading the pipes as may be necessary and supplying all jointing materials, extra sockets, tools and plants etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. (Including cost of materials) a) 125 mm dia PVC Pipe (Schedule-80)[cost of materials] |
| 130 | 125 mm dia PVC strainer[cost of materials] |
| 131 | 125 mm dia PVC Cone |
| 132 | Lowering of 125mm/100mm dia PVC Pipes[Labour] |
| 133 | Supplying all labour, T & P and packing the bore with washed gravel ( size-P-6) around the pipes in good quality including cost of gravel etc. all complete as per direction of Engineer-in-Charge- |
| 134 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-charge. |
| 135 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
| 136 | Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC. |
| 137 | Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
| 138 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 139 | Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 140 | Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.25mm dia HDPE Pipe(Internal Pipe) |
| 141 | EI'Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/KEI/Polycab/Gloster) (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) -do- Group A |
| 142 | -do- Group B |
| 143 | -do- Group C |
| 144 | Recessed wiring to Fan Point in... -do- Group B |
| 145 | -do- Group C |
| 146 | Recessed wiring to Call Bell Point in... -do- Group C |
| 147 | Recessed wiring to Exhaust Fan Point in….. -do- Group B |
| 148 | -do- Group C |
| 149 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. (M-22) |
| 150 | S/F of Angle holder replacing Ceilling Rose (Make : Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 151 | Switch BoardsS/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 152 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 153 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 154 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 155 | S/F of computer board of 12 modular metal box with modular base & cover in recess including providing and fixing of consisting of 3 nos of 5amp modular switch and modular socket & 1 no of Mini MCB, connection, painting etc as required. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 156 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection. (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T) |
| 157 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 4 Modular box with base & cover |
| 158 | 6 Modular box with base & cover |
| 159 | 8 Modular box with base & cover |
| 160 | 12 Modular box with base & cover |
| 161 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/ KEI/ Greatwhite/ Polycab)2x1.5+1x1.5 (1.8.1) |
| 162 | 2x2.5+1x1.5 (1.8.2) |
| 163 | 2x4+1x1.5 (1.8.3) |
| 164 | 2x6+1x2.5 (1.8.4) |
| 165 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 166 | Circuit Breakers S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) (Make : Legrand/ LK/SCHNEIDER/C&S/ABB/SIEMENS) |
| 167 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 8 way Double door (2.3.6) |
| 168 | Main switchesSupply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 169 | EarthingSupply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 170 | S/F of G.I.Earth Plate Earthing 600 mm x600mmx6mm with Salt & Charcoal for Earth electrode (3:4)+(3.6) |
| 171 | FittingsProviding & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 172 | Supply and fixing of 300mm double ball bearing with metal body Exhust fan Copper Winding having Air Deleivery ≥ 1600m3/min with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delux R/ Orient-Power Flow DBB/ Pollycab -Fresh on DBB )(Replacement warranty will be 2 years) |
| 173 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 174 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections ( Make- Crompton/ HPL/ Polycab/ Havells/Orient / Panasonic/ RR/K-lite ) |
| 175 | SITC of 1200mm Sweep BLDC A.C Ceiling fan (5star) Copper Winding with Aluminium Blades having watage not more than 28 watt & Air Deleivery ≥ 215m3/min with out fan regulator (Make:Usha-Energia32 /Crompton- Energion HS/Havells-Efficiencia DX/Anchor-Eco Breeze Urban/Orient-Ecotech Supreme/Pollycab-Affeciente Neo) including wiring,the down rod of standard length (up to 30cm) with 1.5 sq mm PVC insulated single core Multistrand copper conductor etc. as required as per direction of Engineer-in-Charge. (Replacement warranty will be 4 years) |
| 176 | S/F step type modular fan regulator |
| 177 | Supply and fixing of 30-35 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient/K-Lite ) |
| 178 | S/F of 15w Watt LED Bulb (Make- Crompton/ Phillips/ Havells/ Panasonic/Orient/K-Lite) |
| 179 | S/F of 1.5T 3Star Inverter model split type AC Machine, (Make-Carrier/Hitachi/Bluestar/LG/Mistubishi/O-General/Daikin) |
| 180 | S/F of 2000 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous) |
| 181 | S/F of 18W LeD Squre (12\\"×12\\") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic) |
| 182 | S/F of 4KVA Automatic Voltage Stabilizer(110-300V), (Make-Microtech/V-Guard) |
| 183 | CablesS/F of 4 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire Make: Gloster/ KEI/ Finolex/ Anchor/ Havells/ V-Guard/ HPL/ L&T/ Greatwhite/ Pollycab) |
| 184 | Provision of External Electrification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender