Tender For special repair To Block Education Office & Block Resource Center Office (2Nos Of Office) At Gunupur Such As Grading,Flooring,Plastering For The Year 2026-27
Tender Value
7.53 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
5 days left
EMD
7600
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Block Education Office & Block Resource Center Office (2Nos Of Office) At Gunupur Such As Grading,Flooring,Plastering For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing 2.5cm grading concrete from roof slab including stacking the useful materials for reuse and lowering and removing the derbies within 50m lead including cost, conveyance, of all materials with all labour and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge. |
| 2 | 2.5 cm (1\\") thick grading Concrete in proportion (1:2:2) using 6mm size c.b.h.g chips approved quality from approved quarry including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 3 | 6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, EMF,DMF and aditinal charges of all materials and labour with T&P, Cess required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge. |
| 4 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge. |
| 5 | Painting Two coats to walls with distemper to make an even finished surface of approved shade on prepared surface of new works to give a even shade,including sand papering,applying putty wherever necessary & cost of scaffolding,staging charges with cost conveyance royalties of all the materials and all labour with T&P,Cess required for the work etc. (Including cost of distemper) complete in all respect in all floors as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 6 | Painting Two coats with any approved Enamel paints of approved colour, shade Wood / Iron work including sand papering, polishing the surface, cost, conveyance of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 7 | Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 8 | Supplying, fitting, fixing of all types of MS Gates made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 9 | Supplying, fitting, fixing of all types of MS Doors / Ventilator made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 10 | Flyash brick masonry in in all floors cement mortar (1:6) using Flyash bricks of 9\\" size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, EMF,DMF and aditinal charges of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 11 | Providing 12 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 12 | Providing 16 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 13 | Providing, Fixing and fitting of design false ceiling made out of 12.mm Gypsum board of approved section and size fitted and fixed to steel angle section framed with Aluminium anodised T-section no.3215 with 2'-0\\" centre to centre, L section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminum grid 2'-0\\" x 2'-0\\" with Gypsum board suspended from ceiling etc. complete.and suspended from roof slab with roll plug including cost, conveyance of all materials with labour and T&P required for the work etc. complete. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 14 | Providing & Fixing factory made 100\% Solid WPC (Wood Polymer Composite) - Door Frame 125\text{ mm} \times 65\text{ mm} Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Rice Husk/Wheat Husk ) and Non toxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780\text{ kg/ cbm} & an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min. 990\text{ N}), Minimum Compressive Strength of 58\text{ N/mm2}, Modulus of elasticity 900\text{N/mm2} and resistance to spread of flame of class A category with property of being termite / borer proof, water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia and lenght,, all as per specifications drawings as directed by the Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 15 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete all as per specifications drawings as directed by the Engineer-in-Charge. |
| 16 | Suppling, fitting, fixing Unplasticised Poly vinyl chloride (UPVC) (brand-FENESTA/NCL VEKA Ltd ) threee track three panel sliding window-60 series duly manufactured using UPVC reinforced profiles of 108mmx45mmxx2.5mm for outer frame, &window sash of 39mmx58mmx2.5mm capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50micron of minimum thick ness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT GOBAIN make duly fixed with EPDM weathering seal resististant accessories and the system is to be installed using reinforced large coupler at the site using anchor fastener, silicon rubber sealant easy glazing/deglazing at site including cost & conveyance of materials, labour charges, accessories & product confirming to ASTM D 638-14 EN-477-95 & other applicable codes & standards etc, complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender