Tender For Repair And Renovation Of Kanheibindha Phc Building Under Simulia Block In The District Balasore Ama Hospital Inititatives (2Nd Phase) For The Year 2026-27 - 42/6774
Tender Value
60.81 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
8 days left
EMD
60820
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Kanheibindha Phc Building Under Simulia Block In The District Balasore Ama Hospital Inititatives (2Nd Phase) For The Year 2026-27 - 42/6774
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil with dressing and levelling the bed and etc. Complete as per EIC |
| 2 | Providing and filling sand in foundation watering and ramming etc. Complete as per EIC. |
| 3 | Cement concrete (1:4:8) using 4cm size b.h.g metal etc. Complete as per EIC |
| 4 | Cement concrete (1:2:4) using 4cm size b.h.g metal etc. Complete as per EIC. |
| 5 | Brick work with Fly ash Brick of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimonsional C.M (1:6) in Foundation and plinth etc, complete. |
| 6 | Brick work with Fly ash Brick of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimonsional C.M (1:6) in Superstructure and plinth etc, complete. |
| 7 | 12 mm thick cement plaster with cement mortar (1:6) over brick wall outer surface of Brick wall after racking out joints, watering and curing etc complete. |
| 8 | 16mm thick cement plaster with (1:6) over Brick wall to interior surface of Brick wall after racking out joints, watering and curing etc complete |
| 9 | Supplying fitting and fixing of gypsum ceilling with alluminium anadised T section including cost of all labour etc complete. |
| 10 | Dismentaling cement concrete including cost of all labour etc complete |
| 11 | Dismentaling grading concrete on roof slab including cost of all labour etc complete |
| 12 | 4cm thick grading concrete on roof slab including cost of all labour etc complete. |
| 13 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M 30 grade made by block machin of approved size, design & shape and in required patter on road surfce including filling the interstics with sand etc complete. |
| 14 | Supplying fitting and fixing of Vitrified tile floor including cost of all labour etc complete. |
| 15 | Fixing of 10 mm thick Granite tiles in floors treads or stepps and landing on 25mm thick bed of Cement mortar 1:1 ( 1 Cement : 1 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. |
| 16 | Fixing of ceramic wall tiles in dados, skirting riser of stepps 20cmx30cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. |
| 17 | Supplying Fitting and Fixing Chequerrd Tiles in Floors in Cement Mortar (1:4) including all complete as per EIC |
| 18 | Supplying fitrting fixing M.S door in windows & doors of approved design etc, complete. |
| 19 | Supplying fitting and fixing of flush door shutter including cost of all labour etc complete as per direction of Engg-in-charge. |
| 20 | Supplying fitting and fixing of Alluminium window including cost of all labour etc complete. |
| 21 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification etc all completed. |
| 22 | Finishing wall surfaces with Acrylic wall putty (Water based) of approved make and finished smooth and even surfaces to receive painting including cost of all materials taxes, labour T&P etc. |
| 23 | Wall painting 2-coats with plastic emulsion paint over a coat of primer with any approved shade on new work to on ever shade including cost of all materials, labour T&P sundries etc. complete. |
| 24 | Finishing walls with two coat weather seal coat over a coat of primer of any approved shade with cost of all materials etc |
| 25 | Painting two coats over a coat of priming on new wood & iron work etc, complete. |
| 26 | Branding for HWC as per specification in outer plaster surface including all complete |
| 27 | Earth filling in hard soil including cost of all labour etc complete |
| 28 | Single under reamed pile foundation including cost of all labour etc complete. |
| 29 | R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete.Column Base |
| 30 | R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete.Grade Beam |
| 31 | R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete.Column |
| 32 | R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete.Roof Beam |
| 33 | R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete.Roof Slab |
| 34 | Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 35 | Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc. |
| 36 | Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc.Superstructure |
| 37 | Providing fitting and fixing stainless steel lettter with cost of all materials, taxes, labour etc. |
| 38 | Supplying fitting and fixing of Blue Scope fibre sheet including cost of all labour etc complete. |
| 39 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying.(Data for 15 cum.F.F Column |
| 40 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying.(Data for 15 cum.FFRoof Beam |
| 41 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying.(Data for 15 cum.FFRoof Slab |
| 42 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying.(Data for 15 cum.FFLintel |
| 43 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting&laying.(Data for 15 cum.FFChajja |
| 44 | A/R-P 52/item No.9:Supplying, fitting and placing un-coated HYSD bar reinforcement complete as per drawing and technical specification(1st floor) |
| 45 | A/R-P 71/item No.3:Brick work with fly Ash Bricks having crushing strength between 100kg/cm2 to 149kg/cm2 in Cement mortar(1:6) in superstructure including cost of all labour etc complete.(1st floor) |
| 46 | Supplying fitting and fixing of vetrified tile floor including cost of all labour etc complete |
| 47 | Fixing of ceramic wall tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles or stones. |
| 48 | A/R-P 109/item No.26:6mm thick Cement plaster (1:4) finished smooth per 1 Sqm. including curing etc. complete. |
| 49 | A/R-P 105/item No.14:16mm thick Cement plaster (1:6) over brickwork including curing etc. complete.(1st floor) |
| 50 | 12mm thick Cement plaster (1:6) for brickwork including curing etc. complete.(1st floor) |
| 51 | Wall painting 2-coats with plastic emulsion paint over a coat of primer with any approved shade on new work to on ever shade including cost of all materials, labour T&P sundries etc. complete.(1st floor) |
| 52 | Finishing walls with weather coat over a coat of primer approved shade on new work excluding cost of paint.(1st floor) |
| 53 | Painting two coats over a coat of priming on new wood & iron work etc, complete. |
| 54 | A/R-P 132/item No.2:Dressed seasoned Nonsalwood work framed and fixed in trusses,purlins, door, window, ventilaters and beams. |
| 55 | PHSupplying all materials,labour, T&P and cleaning and washing tile surface etc with acid, Phynol mending the tile with white cement etc complete as per specification and direction of the E.I.C |
| 56 | Supplying all materials, labour T&P and fitting & fixing SWR ventilating pipes and fittings of the following O.D conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.- 110 mm dia PVCSWR Pipes |
| 57 | 110 mm dia PVC SWR Door Bend |
| 58 | 110 mm dia PVC SWR Plain Bend |
| 59 | 110 mm dia PVC SWR Cowl |
| 60 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Cera/ Parry ware/ Hindware) |
| 61 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.-- 600mm x 450mm B.E. Mirror (fixed type) |
| 62 | Supplying all materials, labour T&P and fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C. -- 20 mm x 600 mm long C.P Towel rail |
| 63 | C.P. Towel Ring (St.) |
| 64 | Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of E.I.C C.P.Soap Holder. |
| 65 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C -- 450x125mm size Plate Acrylic Shelf |
| 66 | Supplying all materials, labour, T&P and cleaning the liquid sludge etc. all complete and disposing them outside as per direction of E.I.C-liquid Sludge |
| 67 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.-- 12mm thick C.P with C.M. (1:4) |
| 68 | Supplying all materials, labour, T&P and laying 110 mm dia SWR pipes of the following O.D conforming to IS No. 13592 and aligning to requisite gradient inside the trench encasing all round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.- 110 mm dia SWR Pipe Sewerage line with all round encasing (conforming to IS No. 13592) |
| 69 | Supplying all materials, labour, T&P and cleaning and washing the choaked soakway pit of the following size with removal of sludges and debries from pit and cleaning of khoa & filling 50% new khoa etc conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. |
| 70 | Supplying all materials, labour, T &P and providing C.C (1:1.5 :3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C.[RCC Slab-1.20 x2.00 mtr Soak Pit] |
| 71 | Supplying all materials, labour, T&P and fitting water container -2 nos (25 lit & 5 Lit BPA Free) for Liquid Waste treatment including providing 20mm dia & 25mm dia & 32mm dia PVC PIipe, fixing 20mm dia & 32mm dia U-PVC Ball valve including hoisting and placing in position including supplyh of Iron bracket with jally with painting the iron works,including cost of all materials, conveyance & taxes to work site involves managing and treating liquid waste generated from various medical procedures, patient care and labortaory testing to prevent contamination and to ensure safe disposal fixing etc. all complete as per direction of EIC. |
| 72 | Supplying all materials, labour, T&P and constructing soak way pit of the following sizes with precast R.C.C rings joined loose gravel backing in the rear of well steining, precast R.C.C cover slab in c.c.(1:1.5:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, watering ,curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 0.90 mtr dia x 2.00 mtr. deep RCC Ring Pit |
| 73 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C - 25 mm dia PVC (ASTM) Pipe) [External] |
| 74 | 32 mm dia PVC (ASTM) Pipe) [External] |
| 75 | Supplying ail materials,labour,T&P and fitting & fixing brass/C.P fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H specification and direction of E.I.C.- 15mm dia. C.P Bibcock (long body) [Plaza/ Amber Deluxe ] |
| 76 | 15mm dia.C.P Angle stopcock[Plaza/ Amber Deluxe ] |
| 77 | 15mm dia C.P Pillar cock [Plaza/ Amber Deluxe ] |
| 78 | 15mm dia C.P. Elbow Action Bib Cock [Plaza/ Amber Deluxe ] |
| 79 | 15mm dia C.P Extension piece. |
| 80 | 15mm dia PVC Connection Pipe |
| 81 | 32mm dia. PVC Waste Pipe |
| 82 | 32mm dia. C.P. Waste |
| 83 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Cerra/ Parry ware/ Hindware) |
| 84 | Supplying all materials labour T&P and providing, fitting and fixing Aquaguard Thermapure 120 PSS RO ACH,Approximate External dimention 750x690x1420 (WxDxH),Opreating Power Supply-230V AC (50 Hz), pwer Rating (Max) Total-2750(+/-10%, Heating Coil Wattage-2000 W,Water StorageTank Capacity Total-120 ltr, Cold Water-80 ltr, Hot Water-20 liter, Ambient Water-20 ltr. Cooling Capacity -60 LPH, Water outlet Temperature at rated condition,Cold Water -15 Deg C+/-1, Hot Water -50 Deg C+/-1, Refrigerant HFC R 134-a, Thernal insulation PUF, No. of Faucet-03 ( Hot-1, Cold-1 & Ambient-1) No of stages for filter cum purifier-07, permeate (Purified water) production capacity -50LPH, % of purified water recovery -50%, %Rejection of TDS-90% Approx storage tank & Drain Tray material -SS 304, Outer body material-front SS 304, Type of product product construction-concealed, Type of Installation-Indoor, Weight-95KG etc all complete as per direction of Engineer in Charge |
| 85 | E.I.Re- wiring to light point ,Ex haust Fan point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/KEI/Polycab/Gloster) (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) -do- Group A(1.17.1) |
| 86 | -do- Group B(1.17.2) |
| 87 | -do- Group C(1.17.3) |
| 88 | Recessed wiring to Fan Point in... -do- Group C(1.17.3) |
| 89 | S/F of Angle holder replacing Ceilling Rose (Make : Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 90 | S/F of 5A. Switch & 5A. Socket outlet of ISI marked on existing board (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 91 | S/Fof metal box of 150 mm x 75mm x 60mmdeep (Nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amp. Socket out let 5/6amp. Piano type switch,connection,painting etc. as required (1.26) |
| 92 | S/F of metal box of 180mm x 100mmx60mm deep (Nonunal size) in recess with suitable size of Phenolic laminated sheet cover in front including providing and fixing 3 pin 15/16 amp. Socket out let 15/16 amp. Piano type switch,connection, painting etc. as required(1.27) |
| 93 | S/F of Computer board consisting of 3 nos. of 5 amp switch and Socket and 6 amp MCB complete with wiring on (200mmx250x75mm)deep M.S.box with B.k.cover(1.24.9 + 1.25.1+ 1.25.4 +197~) |
| 94 | S/F of Power point with (180mmx100mmx60mm)& (100mmx100mmx60mm) deep M.S box with B.K cover in recess including providing and fixing of 3 pin 15/16 amp. piano type switch & Socket & Mini DP MCB, connection, painting etc as required for AC |
| 95 | S/F to 16/18 SWG metal box of following sizes (normal sixe) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. .do -150 X 150 X 60 mm deep (1.24.4) |
| 96 | -do-180mmx100mmx60mm deep(1.24.5) |
| 97 | -do-200mmx150mmx60mm deep(1.24.7) |
| 98 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/ KEI/ Greatwhite/ Polycab)2x1.5+1x1.5 (1.19.2+1.19.1) |
| 99 | 2x2.5+1x1.5 (1.19.11+1.19.1)) |
| 100 | 2x4+1x1.5 (1.19.20+1.19.1)) |
| 101 | 2x6+1x2.5 (1.8.4) |
| 102 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 103 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) (Make : Legrand/ LK/SCHNEIDER/C&S/ABB/SIEMENS) |
| 104 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 2 way Single door (2.3.1 (b) |
| 105 | S/F of MCB 4 way Single door (2.3.1(a) |
| 106 | Supply and fixing of 300mm double ball bearing with metal body Exhust fan Copper Winding having Air Deleivery - 1600m3/min with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12 reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delux R/ Orient-Power Flow DBB/ Pollycab -Fresh on DBB )(Replacement warranty will be 2 years) |
| 107 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections ( Make- Crompton/ HPL/ Polycab/ Havells/Orient / Panasonic/ RR/K-lite ) |
| 108 | SITC of 1200mm Sweep A.C Ceiling fan (1 star) Copper Winding with Aluminium Blades having Air Deleivery - 225m3/min with out fan regulator (Make:Usha-Striker neo HS/Crompton- HS/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) including wiring,the down rod of standard length (up to 30cm) with 1.5 sq mm PVC insulated single core Multistrand copper conductor etc. as required as per direction of Engineer-in-Charge,(Replacement warranty will be 2 years) |
| 109 | S/F step type modular fan regulator |
| 110 | Supply and fixing of 400 mm wall fan Copper Winding with metal Blades having Air Deleivery - 70m3/minwith all accessories and connections as required as per direction of Engineer-in-Charge.(Make:Usha-Maxx Air Ultra /Crompton- WM Hiflow wave /Havells-Accelro(HS)/Anchor- Altrix HS- OWH /Orient-Wall 43/ Great White - WYNO WF/ Pollycab -Aery HS )(Replacement warranty will be 2 years) |
| 111 | Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient/K-Lite ) |
| 112 | S/F of 1.5T 3Star Inverter model split type AC Machine, (Make-Carrier/Hitachi/Bluestar/LG/Mistubishi/O-General/Daikin) |
| 113 | S/F of 2000 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous) |
| 114 | S/F of 4KVA Automatic Voltage Stabilizer(110-300V), (Make-Microtech/V-Guard) |
| 115 | S/F of 5/6F.T.Switch (1.25.1) |
| 116 | S/F of 15/16F.T.Switch (1.25.2) |
| 117 | S/F of3 pin 5/6F.T.Socket (1.25.4) |
| 118 | S/F of 6 pin 15/16F.T.Socket (1.25.5) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender