Drinking Water Supply and Sanitation Government Departments Closing in 1 days TDR #58477232

Tender For Sinking Production Well Including Electrification At Ward No - 14,13 In Jagatsinghpur Municipality.

Issued by Government Departments · Cuttack, Odisha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Nov 2026
1 days left
EMD
64000
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Sinking Production Well Including Electrification At Ward No - 14,13 In Jagatsinghpur Municipality.

BOQ

Name of Work:- Sinking Production well including electrification at ward no - 14,13 in Jagatsinghpur Municipality.
Sl. No. Item Description
1(A) Sinking of 300mmx 200mm dia Production well(i. Additional production well at ward no-14 & New Production well at ward no-13)
2Supplying all materials,labour ,t&p for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by Mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of finished bore suitable for lowering of 200 mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200 mm to 450 mm dia in over burden portion.From 0 to 100 mtr
3Supplying all, labour,t&p for slot cutting in pvc pipe as per specification with lead all materials to site.
4Supply of all labour & T&P for lowering the following size G.I./PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc.complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fittings & jointing materials.
5Supplying all materials labour , t&p and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 mtrs of 200 dia PVC casing pipe properly as per the direction of Engineer-in-Charge.
6Supplying all materials, labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality including cost of gravel with lead of all materials to site.
7Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
8Supplying all labour, t&p for earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge.
9Supplying all materials, labour, t&p for filling sand infoundation and plinth, watered and rammed with lead of all materials to site.
10Supplying all materials, labour, t&p and providing cement concrete (1:4:8) using 40mm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site.
11Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with ead of all materials to site.
12Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) in foundation and plinth including curing with lead of materials to site.
13Foundation & plinth
14Superstucture
15Supplying of following materials for installation of production well including testing with lead of all materials to site.
16300mm dia ASTM PVC pipe (sch-80)
17200mm dia ASTM PVC pipe (sch-80)
18200mm PVC conical plug
19300mmx200mm PVC R/S
20300mm dia PVC top cap
21Supplying all materials, labour, tools and plant and with drawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition.
22(B) Construction of pump house of size (4mx3m) at ward no-13
23Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge.
24Supplying all materials, labour, t&p and providing shoring & shuttering foundation trenches pits etc. with close wooden planks or sheet shuttering etc. with lead of all materials to site.
25Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 40mm size c.b.h g metal including hoisting, laying and curing with lead of all materials to site.
26Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) including curing with lead of materials to site.
27Supplying all materials, labour, t&p and filling sand in foundation and plinth, well watered and rammed with lead of all materials to site.
28Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with lead of all materials to site.
29Suppling all materials, labour, t&p and providing R.C.C M20 using 20mm & down grade size c.b. h.g chips including hoisting, laying, compacting and curing with lead of all materials to site.
30Supplying all materials, labour, t&p and providing m.s reinforcement for R.C.C work including cutting, bending, binding and tying grills and placing inposition including cost of binding wire 18 to 20gague with lead of all materials to site.
31Supplying all materials, labour, t & p and providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting complete in ground floor.
32R.C.C. floor, roof slab, landing, balconies, chajjas.
33R.C.C. foundation and plinth-band, column base.
34R.C.C.beams, columns,griders and bressmere etc.
35R.C.C.lintels
36Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) in superstructure including curing with lead of materials to site.
37Supplying all materials, labour, t&p and providing 12mm thick cement plaster in (1:6) over brick work including curing with lead of all materials to site.
38Inside plaster Out side plaster
39Supplying all materials, labour, t&p and providing 6mm thick cement plaster in (1:4) over R.C.C work in cealing including curing with lead of all materials to site.
40Supplying all materials, labour, t&p and fixing tiles (non glazed tile vertified) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles with lead of all materials to site.
41Supplying all materials, labour, t&p and providing 2.5cm. thick grading concrete with C.C(1:2:2) on roof slab with 6mm. size c.b h.g chips on new work including curing with lead of all materials to site.
42Supplying all materials, labour, t &p and fitting & fixing of M.S.Door, window and grill gate etc. all complete.
43Supplying all materials, labour, t&p and fitting and fixing of precast ventilator of 0.60m x 0.60m including all cost, taxes etc. all complete
44Supplying all materials, labour, t&p and finishing walls with Weather coat paint of approved shade on new work two coats over one coat of priming to give an even shade with lead of all materials to site as per direction of Enginer in charge.
45Supplying all materials, labour, t&p and painting two coats with plstic emulsion paints over one coat of priming with lead of all materials to site.
46Supplying all materials, labour, t&p and painting two coats with enamel paints over a coat of primer including supply of paints etc. all complete.
47APPROACH ROAD
48Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 40mm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site.
49Supplying all materials, labour, t&p and filling sand in foundation and plinth, well watered and rammed with lead of all materials to site.
50Supplying all materials, labour, t&p and providing R.C.C M20 using 20mm & down grade size c.b. h.g chips including hoisting, laying, compacting and curing with lead of all materials to site.
51(C) Construction of compound wall & Grill gate at ward no-13
52Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge.
53Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 40mm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site.
54Supplying all materials, labour, t&p and filling sand in foundation and plinth, well watered and rammed with lead of all materials to site.
55Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with lead of all materials to site.
56Supplying all materials, labour, t&p and providing R.C.C M20 using 20mm & down grade size c.b. h.g chips including hoisting, laying, compacting and curing with lead of all materials to site.
57Supplying all materials, labour, t&p and providing m.s reinforcement for R.C.C work including cutting, bending, binding and tying grills and placing inposition including cost of binding wire 18 to 20gague with lead of all materials to site.
58Supplying all materials, labour, t & p and providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting complete in ground floor.
59R.C.C. foundation and plinth-band,footing,bases of column, mass concrete etc
60R.C.C.beams, columns,griders and bressmere etc.
61Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) including curing with lead of materials to site.
62Foundation & plinth
63Superstructure
64Supplying all materials, labour, t&p and providing 12mm thick cement plaster in (1:6) over brick work including curing with lead of all materials to site.
65Supplying all materials, labour, t&p and finishing walls with Weather coat paint of approved shade on new work two coats over one coat of priming to give an even shade with lead of all materials to site as per direction of Enginer in charge.
66Supplying all materials, labour, t &p and fitting & fixing of M.S. grill gate made out of Angle section,M.S flats, G.I sheets etc. all complete.
67Supplying all materials, labour, t&p and painting two coats with enamel paints over a coat of primer including supply of paints etc. all complete.
68(D) External Elecrification at ward no-13
69Supplying all materials, labour, t&p and construction of 3ph 3wire 11 KV O.H line over 160mm x 152mm WPB 11 mtr long pole with 55mm2 AAAC PVC cable ,double disc and avrage span -40 mtr with lead of all materials to site as per TPCODL specification.
70Supplying all materials, labour, t&p and construction of 63 KVA, 11/0.4 KV , D.P mounted S/S over 160mm x 152mm WPB 11 mtr long pole with cantilver fittings & service connection with lead of all materials to site as per TPCODL specification.
71(E) Internal Elecrification , Pumping Arrangement & Commissioning
72Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth with lead of all materials to site.( Polycab / Havels / V Guard )
73Light point Group A
74Recessed wiring for light / power plug with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm F.R.P insulated single core multistrand copper conductor for loop earthing with lead of all materials to site.
75Recessed wiring to submain in 4 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of I.S.Imarked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.
76Supplying all materials, labour.t & p and wiring in existing surface/ conduit with insulated single core 10mm2 multistand copper conductor as required.
77Supplying all materials, labour, t&p and fitting & fixing 200 Amp Bus Bar inside chamber.
78Supplying all materials, labour.t & p and fitting and fixing 200 amp kit kats with lead of all materials to site..
79Supplying all materials, labour, t&p and fixing 25KA/3pole , 63Amp M.C.C.B with encloser with lead of all materials to site.
80Supply, Installation, Testing, of 200 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface/wall mountnting including interconnections, earthing, etc. as required as per direction of Engineer in Charge.
81Supplying all materials,labour, t&p and fitting & fixing 30H.P three phase vertical submersible pump set having discharge 130cum/hr at 55m head including testing with lead of all materials to site. One stand by pump
82Supplying, fitting and fixing of star delta control pannel of BCH/LT make for running of 25 to 30 H.P three phase vertical submersible pump set including all taxes and charges as per following accessories and testing. CT- switch, main contactor, auxilary contactor, over load relay (24.4-39Amp), Single phase preventer, Amp meter with selector switch,Volt meter with selector switch. phase indicator lamp and push botton switch. CT coil fixed inside metal box wit short circuit protection.
83Supplying all materials, labour.t & p and fitting and fixing 6mm2 three phase submersible flat cable including testing
84Supplying all materials, labour, t&p and earthing with G.I earth pipe 3meter long 40 mm dia ISI marked including accessories and providingmasonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required
85Supplying all material, labour, t&p and laying 2.24mm dia bare copper wire as running earth and testing with lead of all materials to site.
86Supplying all materials, labour, t&p and fitting and fixing of 6 Amp catrige fuse & holder with lead of all materials to site.
87Supplying all materials, labour, t&p and fitting and fixing of 16 Amp single pole M.C.B with lead of all materials to site.
88Supplying all materials, labour, t&p and fixing of 25 Amp single phase two pole contactor.
89Supplying all material, labour, t&p and fixing of LED indicator lamp (RYB)
90Supplying all materials, labour, t&p and installation of timer switch of solid state electric control with on & off set point per circuit for delay schedule timing so as to automate the running of motor.The timing and set point shall be to nearest minute with suitable to function from 3 H.P to 30H.P range submersible motor at supply voltage 370 to 415 volt for three phase including testing.
91Analog time switch
92Supplying all materials, labour, t&p and wiring with following FR PVC insulated (unseathed) single core copper wire as per direction of engineer in charge.
931 mm2 single core copper wire
94Supplying all materials, labour, t&p and fitting & fixing of 3 position. auto manual switch with adopter.
95Supplying all materials, labour, t&p and fixing powder coated three phase meter box encloser of size 400mmx300mmx200mm with lead of all materials to site. ( BCH)
96Supplying all materials, labour, t&p and fitting & fixing three way bakelite light connector.
97Supplying all labour, t&p and assembling all componets & fixing timer including testing as per actual observation.
98Supplying all materials, labour.t & p and fitting and fixing 250mm dia x 10mm thick M.S cover with nut bolt.
99Supplying all materials, labour, t&p and fixing following galvanised mild steel tubes for making tripod including gas cutting , welding and testing as per specification all complete.
10025mm dia G.I pipe( medium class)
10180mm dia G.I pipe( medium class)
10220mm dia M.S rod hook with Nut&bolt
103Cutting M.S pipe up 6mm thick
104Fillet welding to M.S pipe up 6mm thick
105Supplying all materials, labour, t&p and fixing galvanised mild steel tubes conforming to ( IS.1239 Part-1) & M.S specials, cutting, fabricating, welding pipes with existing pipe line/ laying, testing as per P.H specification and direction of engineer in charge. all complete with lead of all materials to site.
10680mm dia G.I pipe (Medium class)
107100mm dia G.I pipe (Medium class)
108150mm dia G.I pipe (Medium class)
10980mm dia M.S flange
110100mm dia M.S flange
111150mm dia M.S flange
112100mm dia G.I offset bend with M.S flange
113100mm x100mm dia G.I Tee with M.S flange
114150mm x100mm dia G.I Tee with M.S flange
115150mm x100mm dia G.I Reducer with M.S flange
116Cutting M.S pipe up 6mm thick
117Fillet welding to M.S pipe up 6mm thick
118Supplying all materials,labour and T&P and making flanged joints for P.V.C./G.I pipes and specials of the following diameter including testing of joints as per specification all complete.
11980mm dia flanged joint.
120100mm dia flanged joint.
121150mm dia flanged joint.
122Supplying all materials,labour and T&P for fixing of ductile iron Air valve for water works purposes of the following diameter including drilling the water main .
12325mm dia D.I air valve.
124Supplying all materials, labour, t&p and fixing of caste iron N.R valve with double flanged ends for water works purposes of the following rating and diameter including testing of joints as per specification all complete.
125100mm dia C.I N.R valve(P.N-1.6)(Make-Kilosker/Vag/Audo)
126Supplying all materials,labour and t&p and fixing of cast iron sluice valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete.
127100mm dia C.I sluice valve(P.N-1.6)(Make-Kilosker/Vag/Audo)
128Supplying all labour, t&p and dismantling of Granular courses of flexible pavement and disposal of dismantled materials uo to a lead of 1000mtrs ans stacking serviceable and unserviceable materials separately.
129Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge.
130Supplying all materials, labour, t&p and filling sand in pipe line trench well watered and rammed with lead of all materials to site.
131Supplying all labour, t&p and earth work in filling in all kinds of soil including watering and ramming not exceeding 0.30 m in depth as per direction of engineer in charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58477232
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 20-11-2026
Authority
Authority Name Public Health Engineer Organisation
Work Description Tender for Sinking Production Well Including Electrification At Ward No - 14,13 In Jagatsinghpur Municipality.
Basic Detail
Tender No SEPH-DIVISION, KAT-35 (01) of 2026-27
Bidding Type Tender
Location
City Cuttack
State Odisha
Key Dates
Publish Date 11 Nov 2026
Submission Date 20 Nov 2026
Open Date 21 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 10000
EMD 64000
Exemption Available
Document List
143ead00-630e-4413-88f3-13ce17929bd6.html
BOQ_619854.xls
DTCN_Jagatsinghpur.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

143ead00-630e-4413-88f3-13ce17929bd6.html

xls

BOQ_619854.xls

pdf

DTCN_Jagatsinghpur.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender