Tender For Construction Of Bio Medical Waste Management At Uphc Bhawanipatna Bhawanipatna Block In The District Of Kalahandi.
Tender Value
11.91 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
6 days left
EMD
11917
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalahandi → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Bio Medical Waste Management At Uphc Bhawanipatna Bhawanipatna Block In The District Of Kalahandi.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL PARTEarth work in all kinds of soil within initial lead and lift in excavation of foundation |
| 2 | Sand filling in F&P with well watered and rammed inculding cost of sand etc complete. |
| 3 | Cement concrete (1:3:6) using 40mm size CBHG metal including cost conveyence etc complete. |
| 4 | Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance .Footing |
| 5 | Column |
| 6 | Plinth Band |
| 7 | Lintel Band |
| 8 | Chajja |
| 9 | Wall Beam |
| 10 | Roof Slab |
| 11 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications in. |
| 12 | Fly ash Brick masonary with C.M(1:6) using 23x11x8cm size bricks including all cost conveyance, taxes,watering, curring & royality etc. complete. |
| 13 | Fly ash Brick masonary with C.M(1:6) using 23x11x8cm size bricks including all cost conveyance, taxes,watering, curring & royality etc. complete. |
| 14 | 20mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor |
| 15 | 12mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor |
| 16 | 16mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor |
| 17 | Supplying, fitting & fixing of Vitrified colour printed series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) |
| 18 | Supplying, fitting & fixing of Vitrified colour printed series tiles in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 19 | Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. |
| 20 | Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall. |
| 21 | Wall Painting two coats with approved Plastic Emulsion Paint in Ground Floor |
| 22 | Supplying and Fixing of MS grills M.S Grill, MS Door, MS Gate, Post/Trusses etc. including cost , conveyance of all materials, priming and labour for fitting fixing etc. complete as per the instruction of engineer-in-charge. |
| 23 | Painting two coats with approved Enamel Paint on wood work and Steel work |
| 24 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. a)Group-A |
| 25 | b) Group-B |
| 26 | c) Group-C |
| 27 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 28 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit) .All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 29 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 30 | Wiring to Circuit/ Sub-main along with earth wire with following size of FR PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard. 1x1.5mm2 Sub-Main Wiring for Invertor connectiom. |
| 31 | a) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 32 | b) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 33 | c) (1.8.3) 2X4mm2 + 1x1.5mm2 |
| 34 | Recessed wiring to submain in 4 x 6sq.mm FRESH PVC insulated single core multistand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC condult 1.6mm thick along with 2 x 4.0 sq.mm FRLSH PVC insulated single core multistand copper conductor earth wire as equired (Make of wire-Finolex/Anchor/Polycab/Havells/RR KABEL or equivalent) (Make of conduct-AKG/Anchor/Kinjal or equivalent) approved equivalent make as per the direction of Engineer-In-Charger (For LDB, ELDB & UPS DB) |
| 35 | S/F of 5step type electronic fan regulator of havells/legrand/equivalent make |
| 36 | S/F of 5star rated Ceiling fans per direction of engineer in charge Make:Havells/CG/Bajaj/eq |
| 37 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells /Crompton /Usha /Orient /Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 38 | S/F of 63A 4way Busbar Chamber with copper strip of make Bharat/GEC/Eq as per direction of engg in charge. |
| 39 | S/F of 4kg ABC Dry power (S/P) Type Fire Extinguisher pressurized with dry Nitrozen gas at 15 bar.as per IS 15683 with fire rating 2A,21B,at 35 bar,operating temperature-30 C to + 55 C,supplied with standard accessories of ISI marked as per direction of engineer in charge. |
| 40 | S/F of 12watt Surface mounted LED down light complete of Havells/Bajaj/HPL make. |
| 41 | S/F3 1/2 x 25mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) |
| 42 | Laying of cable on wall surface by clamping. |
| 43 | S/F of 90wt LED Street light complete with lamp of Havels/HPL make. |
| 44 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc |
| 45 | (Earthing) INSTALLATION S/IT/C of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. |
| 46 | Providing and fixing 6SWG G.I. wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 47 | Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. Tapping from 50mm x 6 mm bus bar to all sub panel |
| 48 | S/F 63A TPN Main switch of Havells /HPL/L&T or any equivalent make |
| 49 | S/f of 40A TP Isolator of make V.Guard/ Havels. |
| 50 | S/f of 8way double door D Box with 1x32Amp DP of \\"C\\" Series + 6x(16-10)A.SP MCB 'B' series of Havels make |
| 51 | GPHProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia PVC ASTM pipe (sch-80) |
| 52 | 25mm dia PVC ASTM pipe (sch-80) |
| 53 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock(FLR-ACR-5053N) |
| 54 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 55 | 125mm CP grating |
| 56 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 1000 liters capacity PVC water storage tank |
| 57 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ashirvad/Supreme Make) |
| 58 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 59 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 60 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 61 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 62 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) |
| 63 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 64 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 30cmx30cm |
| 65 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 66 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx60cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx60cm |
| 67 | Supplying all materials labour T&P and constructing 1.20m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 68 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:4 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender