Tender For special repair Of 07 Nos Staff Quarter Of Gunupur Ploice Statio Such As Constructing Compound Wall, Fixing Of Door & Window For The Year 2026-27
Tender Value
8.38 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
5 days left
EMD
8400
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair Of 07 Nos Staff Quarter Of Gunupur Ploice Statio Such As Constructing Compound Wall, Fixing Of Door & Window For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision)and as per direction of EIC |
| 2 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed and depositing the excavated materials away from the work site within initial lead & lifts etc. complete as directed by the Engineer in charge. |
| 3 | Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials, cost of all labour and T&P,Cess etc. complete in all respect as per direction by the Engineer in charge. |
| 4 | Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P,Cess etc complete as per the direction of the Engineer -in –charge. |
| 5 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Column Base Footing) |
| 6 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Column up to Pl) |
| 7 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Plinth Band) |
| 8 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Lintel Band ) |
| 9 | Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance of all materials and cost of all labour with all T&P,Cess required for the work etc. complete as directed by the Engineer- in-Charge. |
| 10 | Supplying, fitting, fixing of all types of MS Grills / Gates made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 11 | Supplying of M.S. Angle / square bar of approved size, febricatrd to fix GCI sheets on roof etc including cost, conveyance of all materials complete as per the instruction of Engineer-in-Charge . |
| 12 | Fly ash brick masonry in foundation with cement mortar (1:6) in foundation using fly ash bricks of “23cmx11cmx8cm\\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 13 | Fly ash brick masonry in all floors with cement mortar (1:6) in Superstructure using fly ash bricks of “23cmx11cmx8cm\\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 14 | Providing 12 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P, Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 15 | Providing 16 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 16 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge. (Compound Wall) |
| 17 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge.(Ground Floor) |
| 18 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge.(First Floor) |
| 19 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge.(Second Floor) |
| 20 | Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new iron work including sand papering, polishing the surface, cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Ground Floor) |
| 21 | Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new iron work including sand papering, polishing the surface, cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(First Floor) |
| 22 | Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new iron work including sand papering, polishing the surface, cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Second Floor) |
| 23 | Supplying and installing UPVC-3 tracks sliding windows and 2 sashes (shutters) with ss mesh sash welded, fully reinforced with Galvanized steel of 1.2\text{ mm} to 2\text{ mm}. The sash will be fitted with 5\text{ mm} reflective toughened glass of make - Saint gobain/AIS/Goldplus. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from inside /Outside of Dowcoring / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge |
| 24 | Providing & Fixing factory made 100\% Solid WPC (Wood Polymer Composite) - Door Frame 125\text{ mm} \times 65mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Rice Husk/Wheat Husk ) and Non toxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min. 990 N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia and lenght,, all as per specifications drawings as directed by the Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 25 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete all as per specifications drawings as directed by the Engineer-in-Charge. |
| 26 | Supplying, fitting, fixing barbed wire including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P,Cess etc. complete as per the direction of the Engineer-in-charge. (Peiphery Compound Wall) |
| 27 | Labours for fitting, fixing barbed wire including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P,Cess etc. complete as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender