Power Boards / Undertakings / PSU Closing in 3 days TDR #58476647

Tender For Ht Reconductoring Of Rubco Feederwork Under : Electrical Section Thalassery South Tender Number: Tender/2026-27/6158/94 Dt. 22-10-2026

Issued by Boards / Undertakings / PSU · Kannur, Kerala
Tender Value
5.37 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
13500
Bank guarantee accepted
Document Fee
1298
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Ht Reconductoring Of Rubco Feederwork Under : Electrical Section Thalassery South Tender Number: Tender/2026-27/6158/94 Dt. 22-10-2026

BOQ

Name of Work:- HT reconductoring of Rubco feederWork under : Electrical Section Thalassery South Tender Number: TENDER/2026-27/6158/94 dt. 22-10-2026
Sl. No. Item Description
1Dismantling (without damage) one km 11kV line (three conductors) including dismantling cross arm, insulators, disc, disconnecting jumper connection, rolling the conductor and stacking the materials.
2Dismantling CT/PT unit incl.loading & unloading at site.
3Erecting one CT-PT unit to existing DP and giving connections, including loading from TMR/SRS/other stacking place & unloading at site, but excluding cost for transporting CT-PT.
4Dismantling (without damage) one AB switch from existing structure and bringing back to section store.
5Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.
6Dismantling (without damage) one Channel cross arm from existing DP structure and bringing back to section store.
7Renewal of existing damaged/old 11kV A type pole with new A type pole in place including excavation of pole pit, erection of new pole, backfilling pit and refitting of all items etc. and conveyance of all materials except pole.
8Dismantling one damaged 11kV A type pole after disconnecting stays, strut etc. attached thereon and stacking the same.
9Dismantling (without damage) one HT PSC/RCC Strut pole including removal of clamps and stacking.
10Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.
11Fitting one Additional V cross arm in existing single pole including conveyance of materials.
12Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole.
13Dismantling (without damage) one HT stay including digging pit in all classes of soil and backfilling, and bringing back to section store.
14Fitting and erecting one HT A type Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
15Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
16Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
17Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
18Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
19Providing Cable Tie
20Erection of suspension clamp for 11KV ABC of any size
21Fitting one set (3No.) 11kV LA and giving connections excluding earthing.
22Stringing of 11 kV Aerial bunched cable of size 3 x 120+ 1 x 95 sqmm with bare/insulated Messenger through existing poles
23Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil& backfilling.
24Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm and connecting to existing MVT or other terminals,using the cable end termination kit supplied departmentally including charges for cable jointer etc. complete as per the direction of the departmental officers.
25Fiting One No MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable
26Drilling hole of various sizes on existing Channel/Cross Arm.
27Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
28Erection of Anchor clamp / dead end clamp for 11kV ABC of any size
29Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.
30Renewal of existing damaged/old 11kV Stay with new stay in place including excavation & backfilling of pit, dismantling, refitting of all items and conveyance of all materials.
31Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at standard distance (1.5m) away from the pole/structure in ordinary soil & backfilling the pit with 15cm alternate layer of charcoal, salt and sand up to 90cm from the bottom. including the cost of 20kg salt, 25kg charcoal, excluding supply of earth pipe.
32Renewal of existing damaged/old 11kV A type DP with new A type DP in place including excavation of pole pit, erection of new pole, backfilling pit and refitting of all items etc. and conveyance of all materials except poles.
33Providing concrete muffing of size 0.45x0. 45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm)0.45x0.45x1.5m, Plastering (1:3) 12mm0.45x0.45mx5sides. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58476647
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 5.37 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Kerala State Electricity Board
Work Description Tender for Ht Reconductoring Of Rubco Feederwork Under : Electrical Section Thalassery South Tender Number: Tender/2026-27/6158/94 Dt. 22-10-2026
Basic Detail
Tender No TENDER/2026-27/6158/97 dt. 10-11-2026
Bidding Type Tender
Location
City Kannur
State Kerala
Key Dates
Publish Date 11 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 5.37 Lakhs
Tender Fee 1298
EMD 13500
Exemption Not Available
Document List
5464b336-c418-421a-859d-fdde34c9abea.html
BOQ_1515358.xls
Tendernotice_1.pdf
TendocTLY.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

5464b336-c418-421a-859d-fdde34c9abea.html

xls

BOQ_1515358.xls

pdf

Tendernotice_1.pdf

pdf

TendocTLY.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender