Power Boards / Undertakings / PSU Closing in 5 days TDR #58476581

Tender For Constructing Ht Abc From Kareekunnu To Maniyoor Vayal And Erctiing Transformer Near Iyyathumkadwork Under : Electrical Section Kodiyeri Tender Number: Tender/2026-27/6158/94 Dt. 22-10-2026

Issued by Boards / Undertakings / PSU · Kannur, Kerala
Tender Value
6.05 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
15200
Bank guarantee accepted
Document Fee
1534
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Constructing Ht Abc From Kareekunnu To Maniyoor Vayal And Erctiing Transformer Near Iyyathumkadwork Under : Electrical Section Kodiyeri Tender Number: Tender/2026-27/6158/94 Dt. 22-10-2026

BOQ

Name of Work:- Constructing HT ABC from Kareekunnu to Maniyoor Vayal and erctiing Transformer near IyyathumkadWork under : Electrical Section Kodiyeri Tender Number: TENDER/2026-27/6158/94 dt. 22-10-2026
Sl. No. Item Description
1Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.
2Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.
3Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
4Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
5Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.
6Fitting one Additional2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.
7Drilling hole of various sizes on existing Channel/Cross Arm.
8Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as perstandards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
9Fiting One No MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable
10Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm and connecting to existing MVT or other terminals,using the cable end termination kit supplied departmentally including charges for cable jointer etc. complete as per the direction of the departmental officers.
11Erection of Anchor clamp / dead end clamp for 11kV ABC of any size
12Erection of suspension clamp for 11KV ABC of any size
13Stringing of 11 kV Aerial bunched cable of size 3 x 120+ 1 x 95 sqmm with bare/insulated Messenger through existing poles
14Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
15Disconnecting and loweringdown the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
16Reshackling one span LT single phase 2 wire OH line including pin binding, jumpering, replacing insulators/cross arms/shackle, tightening stay, cutting tree branches etc. wherever necessary including conveyance of all materials.
17Reshackling one span LT three phase 4 wire OH line including pin binding, jumpering, replacing insulators/cross arms/shackle, tightening stay, cutting tree branches etc. wherever necessary including conveyance of all materials.
18Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).
19Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5maway from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.
20Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling.
21Erecting one 100kVA Transformer to existing DP and giving connections, including loading from TMR/SRS/other stacking place & unloading at site but excluding cost for transporting transformer.
22Transporting Transformers by hired vehicle to a distance upto 5km and carrying upto 2 numbers of 63/100/160/250kVATransformers / Ring Main Units excluding loading& unloading charges.
23Fitting 5 channel cross arms, AB switch, DO fuse, LA(Ord), HT & LTconnections upto OH lines, etc. on existing DP structure, Fixing distribution box/provision for one set (3No.) of LT fuses, , drawing sufficient length of GI earthing leads to the ground for earthing, excludingprovision of earthing & mounting of Transformer on poles.
24Fitting one Additional V cross arm in existing single pole including conveyance of materials.
25Installing one DTR Meter with box (normal size 40x25x100cm) on existing poles including fixing of 3 CTs on bus bar, laying and termination of control cable using proper lugs, fixing of meters, capacitors, control fuses and giving the complete connections including conveyance of materials.
26Errection and commissining of street light metering with timer
27Cleaning and levelling of transformer yard/RMU, spreading 40 mm broken stone in yard for a thickness of 10 cm above bed of 10 cm thick 6 mm broken stone, after constructing a curb wall of height 20cm above ground and 10cm below level including cost of all materials and charges for conveying, spreading, consolidating etc.
28Providing Transformer fencing to a height of 1.8 m above ground level using MS Angle frames of size ISA 50x50x6mm for outer frame, 2 runs of 40 x 6 MS flat forhorizondal brasing and grills with MS rods 8 mm Dia @ 10cm c/c for verticals, providing gate with locking arrangements, providing danger board & name board, embeding the legs in cement concrete 1:2:4, footing of size 30cmx30cmx50cm, painting with synthetic enamel paint two coats over one coat of iron primer etc complete, incl cost of transportation
29Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58476581
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 6.05 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Kerala State Electricity Board
Work Description Tender for Constructing Ht Abc From Kareekunnu To Maniyoor Vayal And Erctiing Transformer Near Iyyathumkadwork Under : Electrical Section Kodiyeri Tender Number: Tender/2026-27/6158/94 Dt. 22-10-2026
Basic Detail
Tender No TENDER/2026-27/6158/96 dt. 10-11-2026
Bidding Type Tender
Location
City Kannur
State Kerala
Key Dates
Publish Date 11 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 6.05 Lakhs
Tender Fee 1534
EMD 15200
Exemption Not Available
Document List
BOQ_1515287.xls
fe12c25e-020b-4ebd-9e0d-d61bd5c3e53c.html
Tendernotice_1.pdf
TendocKodiyeri.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1515287.xls

html

fe12c25e-020b-4ebd-9e0d-d61bd5c3e53c.html

pdf

Tendernotice_1.pdf

pdf

TendocKodiyeri.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender