Heavy Industries and Public Enterprises Boards / Undertakings / PSU Closing in 0 days TDR #58472411

Tender For R & M Of Township (Miscellenous Activities For The Prepration Of Upcoming Mcm/ Vvip Visits In Bhel Township, Haridwar)

Issued by Boards / Undertakings / PSU · Haridwar, Uttarakhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for R & M Of Township (Miscellenous Activities For The Prepration Of Upcoming Mcm/ Vvip Visits In Bhel Township, Haridwar)

BOQ

Name of Work:- R & M of Township (Miscellenous activities for the prepration of upcoming MCM/ VVIP visits in BHEL Township, Haridwar)
Sl. No. Item Description
1Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ::35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Unit:sqm
2Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I):On one side only Unit:sqm
3Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :: 35 mm thick shutters: with ISI marked M.S. pressed butt hinges bright finished of required size:Second class teak wood Unit:sqm
4Providing and fixing bright finished brass butt hinges with necessary screws etc. complete ::100x85x5.5 mm (heavy type) Unit: each
5Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete ::200x10 mm Unit:each
6Providing and fixing bright finished brass door latch with necessary screws etc. complete ::250x16x5 mm Unit:each( S.l.No. : 9.75.2) Page No.: 157
7Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Unit:each
8Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Unit:each
9Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : :Water thinnable cement primer. Unit:Sqm
10Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : :Two or more coats on new work. Unit:Sqm
11Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Unit:Sqm
12Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : :Old work (one or more coats) Unit:Sqm
13French spirit polishing : :One or more coats on old work. Unit:Sqm
14Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Unit:Sqm
15Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Unit:Each
16Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Unit:Each
17Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Unit:Each
18Providing and fixing toilet paper holder : :C.P. brass Unit:Each
19Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. Unit:Each
20Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Unit:Each
21Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. :600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than190gms. Unit:Each
22Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes. Weighing not less than 60 gms. Unit:Each
23Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing& fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Unit:Each
24Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.. Unit:Each
25Providing and fixing gun metal non- return valve of approved quality (screwed end) : : 25 mm nominal bore :Horizontal Unit:No.
26Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore. Unit:No.
27Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690gms. :15 mm nominal bore Unit:No.
28Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. :15 mm nominal bore. Unit:No.
29Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore :15mm nominal bore Unit:No.
30Providing and fixing PTMT stop cock of approved quality and colour. :15 mm nominal bore, 86mm long. Weighing not less than 88 gms. Unit:No.
31Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. :15 mm nominal bore. Weighing not less than 32 gms. Unit:No.
32Miscellaneous work by jcb in township at bhel haridwar (removal of encroachment, lifting of loose tree from different locations from township, cutting & cleaning of bushes and shrubs, excavation of unauthorised way in different sector at township, cleaning of ravines, excavation of ditch regarding stopping the unauthorised mining, bridged work of soil etc) in all respect as per direction engineer i/c. rate will be per hour basis.
33Cleaning the various areas like open area near the barriers, road sides, parks, open grounds, etc. and transporting the garbage to the designated location in bhel township with the help of tractor-trolley(hydraulic) from 8:00 am to 5:00 pm with one-hour break as per the satisfaction and direction of engineer-in-charge. (all the tools, tackles, fuel and driver required for proper completion of the work shall be arranged by the contractor.) working for 8 hours? duration = 1 job unit)
34Providing and fixing hand shower (health faucet) (abs body) with 8mm dia , 1 meter long flexible tube & wall hook as per manufacturer specification or as directed by engineer incharge including all labour, fittings etc. complete.brand essco catalogue no. code: ale-chr-583
35Supplying and stacking of well-seasoned deodar wood planks in different sizes for repairing door, windows, ventilators shutters as approved and as direction of engineer-in -charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58472411
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 18-11-2026
Authority
Authority Name Bharat Heavy Electricals Limited
Work Description Tender for R & M Of Township (Miscellenous Activities For The Prepration Of Upcoming Mcm/ Vvip Visits In Bhel Township, Haridwar)
Basic Detail
Tender No BHEL/HEEP/WCS/26-27/202602771 Dt. 11.11.2026
Bidding Type Tender
Location
City Haridwar
State Uttarakhand
Key Dates
Publish Date 11 Nov 2026
Submission Date 18 Nov 2026
Open Date 18 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
62b78b77-87b1-46bf-812c-35c3296c6b24.html
BOQ_72383.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Today

Tender Documents

Download All (ZIP) ↓
html

62b78b77-87b1-46bf-812c-35c3296c6b24.html

xls

BOQ_72383.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender