Housing Urban and Rular Development Government Departments Closing in 3 days TDR #58472311

Tender For Road Safety Works At 06 Intersections (Chainages 3.700, 3.800, 5.800, 5.900, 9.400) And 03 T-Junctions (Chainages 0.050, 2.60, 2.70) On The Bhaisaha-Piprajham Road (Other District Road) Under The Provincial Division In Kushinagar District

Issued by Government Departments · Kushi Nagar, Uttar Pradesh
Tender Value
9.60 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
3 days left
EMD
96000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kushi Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Road Safety Works At 06 Intersections (Chainages 3.700, 3.800, 5.800, 5.900, 9.400) And 03 T-Junctions (Chainages 0.050, 2.60, 2.70) On The Bhaisaha-Piprajham Road (Other District Road) Under The Provincial Division In Kushinagar District

BOQ

Name of Work:- tuin dqkhuxj esa izk0 [k0 ds vUrxZr HkSlgk fiijk>ke ekxZ ¼vU; ftyk ekx½Z ij iM+us okys 06 pkSjkgs ¼pS0 3-700] 3-800] 5-800] 5900] 9-400½ o 03 Vh0 taDku ¼pS0 0-050] 260] 2-70½ ij lM+d lqj{kk dk dk;ZA
Sl. No. Item Description
1Providing and laying bituminous concrete with 60-90 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects.
212-15M Span overhead structure with 300 dia MS Two vertical post- Supply fixing & eraction of built up cantilevere of 12-15M span comprising of two vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm MS plate at bottom. The horizontal truss shall comprise of 50 mm dia heavy class MS. Pipe and 40 mm dia heavy MS pipe as bracing & 10 mm MS plate at bottom for fixing to verticlal post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. the work includes construction of RCC Foundation of size 0.90x0.90 mm of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick lean Concrete in 1:4:8 (cement coarse sand and 40 mm gauge S.B) RCC with 1:2:4 (Cement coarse sand and 20 Mm stone grit) including supply and fixing of 25 mm dia foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering the lateral vertical clearances and complete.
3Providing & laying of retro- reflective sheeting on over head /cantilever structure
4Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. {90 cm equilateral trinagle }
5Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. { 80X60 Rectanglar at each market }
6Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. { 90 cm octagonal }
7Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. { Hazard Marker 30 cm x 90 cm LEFT/RIGHT }
8Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. {CHEVERON 50cmx60 cm}
9Road DelineatorDelineator Supply & Fixing of MS Delineator made of Mild Steel with pure polyester powder coating wit the minimum thickness of powder coating of not less than 40 micron for protection against corrosion the surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steel Guide poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtainl clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexiblilty, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering
10Providing and fixing reflective tree plate size 15x15 cm consisting type xi sheeping over 1.5 mm thick aluminium sheet including labour material and T&P etc complete.
11Reflective raised pavement markers (Cat eye/Road stud)Supply and fixing of raised pavement marker with made of plastic body of RPM/Road stud shall be moulded from ASA (Acrylic styrene Acrylonitrite) or HIPS (High impact polystyrene) or Acryloniitrite Butadien styrene (ABS) or any other suitable material approved by the engineer. The Marker shall support a load of 13.635 kg tested in accordance with ASTM D4280 with ASTM D 4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be moulded of methyl methecrylate conforming to ASTM D788 of equivalent. The slop or retro reflecting surface shall be preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sqcm the marker height shall not be less than 10 mm and shall not exceed 20 mm and width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58472311
AUTHORITY Government Departments
TENDER VALUE 9.60 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name Public Works Department
Work Description Tender For Road Safety Works At 06 Intersections (Chainages 3.700, 3.800, 5.800, 5.900, 9.400) And 03 T-Junctions (Chainages 0.050, 2.60, 2.70) On The Bhaisaha-Piprajham Road (Other District Road) Under The Provincial Division In Kushinagar District
Basic Detail
Tender No 3346/7A DATE 14-10-2026
Bidding Type Tender
Location
City Kushi Nagar
State Uttar Pradesh
Key Dates
Publish Date 07 Nov 2026
Submission Date 19 Nov 2026
Open Date 19 Nov 2026
Finance
Tender Value 9.60 Lakhs
Tender Fee 944
EMD 96000
Exemption Not Available
Document List
98240d71-29fc-48d6-9fca-2615e0d138b9.html
BOQ_2260993.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

98240d71-29fc-48d6-9fca-2615e0d138b9.html

xls

BOQ_2260993.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender