Water Resources and Irrigation Government Departments Closing in 14 days TDR #58472213

Tender For Construction Of Bankal-Path Fis, Lis From River Diyung At Diyungbra Area And Dismaihadi Irrigation Scheme Under Sopd-G For The Year 2026-27 Under West Dima Hasao Divisin (I) (Pkg-2)

Issued by Government Departments · Dima Hasao, Assam
Tender Value
34.91 Crore
Estimated cost
Bid Submission
03 Dec 2026
14 days left
EMD
69.82 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dima Hasao → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Bankal-Path Fis, Lis From River Diyung At Diyungbra Area And Dismaihadi Irrigation Scheme Under Sopd-G For The Year 2026-27 Under West Dima Hasao Divisin (I) (Pkg-2)

BOQ

Name of Work:- Construction of Bankal-Path FIS, LIS from River Diyung at Diyungbra area and Dismaihadi Irrigation Scheme under SOPD-G for the year 2026-27 under West Dima Hasao Divisin (I) (Pkg-2)
Sl. No. Item Description
1Development of Pressurized Pipe Irrigation Network
2Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soilUpto 80mm dia.
380mm to 300mm dia
4300mm to 600mm dia
5Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects.HDPE (PE-100) PN-6 PIPELINE - 63mm
6HDPE (PE-100) PN-6 PIPELINE - 75mm
7HDPE (PE-100) PN-6 PIPELINE - 90mm
8HDPE (PE-100) PN-6 PIPELINE - 110mm
9HDPE (PE-100) PN-6 PIPELINE - 125mm
10HDPE (PE-100) PN-6 PIPELINE - 140mm
11HDPE (PE-100) PN-6 PIPELINE - 160mm
12HDPE (PE-100) PN-6 PIPELINE - 180mm
13HDPE (PE-100) PN-6 PIPELINE - 200mm
14HDPE (PE-100) PN-6 PIPELINE - 225mm
15HDPE (PE-100) PN-6 PIPELINE - 250mm
16HDPE (PE-100) PN-6 PIPELINE - 280mm
17HDPE (PE-100) PN-6 PIPELINE - 315mm
18HDPE (PE-100) PN-6 PIPELINE - 355mm
19HDPE (PE-100) PN-6 PIPELINE -400mm
20HDPE (PE-100) PN-6 PIPELINE - 450mm
21HDPE (PE-100) PN-6 PIPELINE - 500mm
22HDPE (PE-100) PN-6 PIPELINE - 560mm
23HDPE (PE-100) PN-8 PIPELINE - 355mm
24HDPE (PE-100) PN-8 PIPELINE -400mm
25HDPE (PE-100) PN-8 PIPELINE - 450mm
26HDPE (PE-100) PN-8 PIPELINE - 500mm
27HDPE (PE-100) PN-8 PIPELINE - 560mm
28HDPE (PE-100) PN-10 PIPELINE - 355mm
29HDPE (PE-100) PN-10 PIPELINE -400mm
30HDPE (PE-100) PN-10 PIPELINE - 450mm
31HDPE (PE-100) PN-10 PIPELINE - 500mm
32HDPE (PE-100) PN-10 PIPELINE - 560mm
33HDPE SPECIALS FOR HDPE PIPELINE: Providing, supplying, laying and jointing of all necessary HDPE Specials and fittings, including bends, tees, reducers, couplers, electrofusion fittings, electrofusion saddles, flanged adaptors, stub ends, backing flanges/rings, service saddles, end caps and other specials/fittings required for complete execution of the HDPE pipeline, conforming to IS 4984:2016, relevant applicable standards and approved specifications, complete as directed by the Engineer-in-Charge. The quantity/value of HDPE Specials shall be restricted to 2% of the total certified/billed amount under the relevant HDPE Pipe items. For BOQ purposes, the rate shall be considered as ₹1.00 and the quantity shall be equivalent to 2% of the total amount actually certified/billed against the relevant HDPE Pipe items. (Lump Sum)
34Supply and delivery of DI Pipes as per IS : 8329/2000 including cost and conveyance, excluding taxes etc. complete.including transportation charges and Loading, unloading and stacking,Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No. 3114 / 1994), Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987DI (K-7) PIPELINE300
35350 mm
36400 mm
37500 mm
38DI SPECIALS FOR DI (K-7) PIPELINE: Providing, supplying, laying and jointing of all necessary DI Specials and fittings, including bends, tees, reducers, collars, flanged adaptors, dismantling joints, puddle flanges and other specials required for complete execution of the DI (K-7) pipeline, conforming to relevant applicable standards and approved specifications, complete as directed by the Engineer-in-Charge. The quantity/value of DI Specials shall be restricted to 2% of the total certified/billed amount under Sl. Nos. 1 & 2 (DI Pipes). For BOQ purposes, the rate shall be ₹1.00 and the quantity shall be equivalent to 2% of the total amount actually billed under DI Items.
39Design, Supply, Erection and Commissioning of Village Management System (VMS) in Village for Flow Control/Pressure Control/Metering/ON-OFF from Remote as and when required for Isolation of downward Network and ease of commissioning.
40Design, Supply, Erection and Commissioning of Air Management System consist of Air Valve with Isolation Valves along with AMS Control Unit for Burst Monitoring by Pressure Monitoring at Air Valve Location in Distribution Network
41Design, Supply, Erection and Commissioning of Outlet Management System (OMS) with Rotation for 5 Ha at 30 Ha for Flow/Pressure Control/Metering/ON-OFF from Remote as and when required for equitable distribution of water.
42Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.complete.Sluice valves - PN -1.6 (With by pass arrangement) 100MM
43Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete.(Rate for all class of valves.)100MM
44Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation /structural steel support. Butterfly valve - PN - 1.6 (With by pass arrangement) 500 mm.
45Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)500MM
46Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve,small orifice elastic ball resting on a gun metal orifice nipple,large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled,including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc.complete.Kinetic Air Valve Flanged Type - PN - 140 mm.
4750 mm.
4880 mm.
49100 mm.
50Lowering, laying and fixing in proper alignment andpositionall types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete.(for all class of valves).Kinetic Air Valve Flanged Type - PN - 140 mm.
5150 mm.
5280 mm.
53100 mm.
54Establishment of Communication network and cloud-based Automation Command Centers
55Design, Supply, Erection and Commissioning of Automation System for Pumping Station including PLC, Instruments,Flowmeters etc. And System –Distribution Connectivity in the Distribution Network
56Construction of Control Room & Operational Infrastructure
57Earthwork in excavation trenches of walls, retaining walls, footing of columns, steps and septic tank including refilling (return filling) the quantity as necessary after completion of works, breaking clods in return filling, dressing, ramming, watering etc. and removal of surplus earth with all lead and lift upto 2 metre as directed and specified in following classification of soils, including bailing out of water where necessary upto depth below the existing groundlevel as mentioned in the approved drawing andcomplete as directed and specified.(A) In ordinary soil
58Soling in foundation at all levels including filling intersides, ramming etc complete as directed and ofspecified thickness with 9 cm brick on flat including sand packing.
59CC Work in proportion 1:3:6 in foundation /abutment/ pier/wing walls etc. with hard broken stone aggregate of size 13 to 38 mm including curing with necessary shuttering , Scafolding etc. where necessary, complete as directed. (shuttering where necessary shall be measured and paid separately).
60Brick work in cement mortar with 1st class brick as directde in foundation, retaining walls, plinth & steps including recking out joints & curing
61Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by truck carriage for a minimum distance of 4 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
62Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
63Form workCentering and shuttering including propping etc where necessary and removal of forms after completion of CC and RCC works as directed complete. (Measurement to be taken on the face area timbered).(C) Shuttering (Column)
64Tie beam
65Lintel
66Chajja
67Ceiling Beam
68RCC work in slab, abutment cap and above abutment, pier cap, pedestals, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing, dewatering etc. complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately)
69Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level.(a) In cement mortar in proportion 1:4.(1 cement:4 sand)
7012 mm cement plastering including clearing surface and curing complete as directed.(ii) In proportion 1:4
71Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece
72Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old works (one or more coats).
73Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
7465 mm thick traced flooring with cement concrete in prop 1:2:4 with broken stone agg. of size 6 mm to 20 mm over one 1st class brick flat soling including sand packing of the voids in between the bricks, watering, ramming properly where necessary etc. complete and 12 mm thick cement plastering. Finishing on top trowelling altering curing complete as directed. (Brick soling to be paid seperately).
75Construction of RCC Chambers / Structures in the Pipe Network
76Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
77Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
78Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
79Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
80CEMENT PLASTER (IN FINE SAND) 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)
81Construction of Sprout Chamber
82Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
83Soling in foundation at all levels including fillingSoling in foundation at all levels including filling intersides, ramming etc complete as directed and of specified thickness with 9 cm brick on flat including sand packing.
84C.C work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone agg. of size 13 mm to 38 mm including curing with necessary timber shuttering, scaffolding etc.where necessary complete as directed. (Shuttering, scaffolding cost will be paid separately).
851st class brick work in cement mortar in abutment and wing wall, parapet wall etc.including racking out joints and curing etc. complete. (In proportion 1:4)
86CEMENT PLASTER (IN FINE SAND) 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)
87Supplying, fitting, fixing 110 mm dia PVC Rising pipe from the toe of main line including local carriage, testing leakage etc. complete as directed.
88Supplying, fitting, fixing PVC bend pipe size joining with pipes with solvent cement, testing leakages etc. complete as directed.
89Supplying, fitting, fixing PVC Pipes (IS 12818, 4 kg/cm2), joining pipes with relevant cement, levelling, testing leakages etc. complete as directed. (Cost of E/W foundation trenches will be paid separately).
90Solar Centrifugal Pump set with 40 HP
91Supply of 1)40hp centrifugal pump (6x6) 2)40kw Solar Modules - 550Wp*72nos 3) GI structure 40kw 4)16sqmm x 3core- Ac cable 5) 4sqmm x 1core - Dc cable 6) Acdb 7)Dcdb 8)Lightening kit
92Mechanical Works
93Fabricated heavy duty G.I. Pipe confirming to IS 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole as per B.S.S.-10 Part-I, table-D, of size150mm dia x 3.00 Mtr. long
94Fabricated heavy duty G.I. Bend confirming to IS– 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole as per B.S.S.-10 Part-I, table-D, of size:-150mm dia x 90º
95150mm dia x 45º
96150mm dia x 22½º
97Fitting, fixing and laying of G.I. Pipes with Accessories: Laying, fitting, fixing and connection of suction pipe line for each pump set with 150mm dia. G.I. pipes of different length, fabricated G.I. pipes with different length, fabricated bends, tapper including foot valve for suction side. Reflex valve, sluice valve for delivery side of each pump set with 125mm dia. G.I. pipes with different length, bends, fabricated G.I. pipes with different length as per drawing. The joints should be with the best quality pipe joining sets of required size comprises of 60mm thick black moulded rubber gasket, necessary nuts, bolts and washer. Every joint should be leak proof and should be completed in all respect from foot valve to the pump flange for suction side and from delivery flange is the water flow through at proper F.S.L for the delivery side. The pipes lines with accessories must be proper painting.
98CI Foot Valve: Heavy Duty CI Foot Valve, Flange type, the holes of the flange should be drilled as per BSS No. 10, Part-1, Table-D. The materials of construction and all components of the Foot Valve should strictly conform to IS : 10805 - 1986 and having marked with manufacturer’s name and trade mark. 150mm dia
99CIDF sluice valve: Heavy Duty CIDF sluice valve, inside screw, non raising, vertical spindle type with hand wheel operation, need for water purpose. The rotation of closing should be counter clock wise. The holes of the flange should be drilled as per BSS No.10, Part-I, Table-D. All materials, construction and components should strictly conform to IS : 14846 - 2000 and having marked with manufacturer’s name and trade mark Make: Kirloskar / Upadyaya / Zolato / Venus & Equivalent. 150mm dia
100CIDF Reflex Valve: Heavy Duty CIDF Reflex Valve, swing check type, with by pass arrangement, horizontal operating. The holes of the flange to be as per BSS NO.-10, Part-I, Table D and the material, construction and all components should strictly conform to IS : 5312 (Part – I) - 2004 and having marked with manufacturer’s name and trade mark. 150mm dia
101Flexible rubber hose pipe as per construction schedule with required nos of wire reinforcement inside at different layers, without / with MS built in type flange coupling on both ends having drilled as per BSS No. 10, Part – I, Table – D. The hose pipes should be capable of withstanding a pressure equal to 1.5 times the designed working pressure without failure as per IS : 443 - 1975 and also withstand vacuum drawn upto 625 mm of mercury (approx.).The schedule of construction of the hose pipe should conform to IS : 3549 – 1983. B. With MS built in type flange150 mm nominal dia X 7.50Mtr in length
102Surge Protection System.Design, Supply, Erection and Commissioning of Surge Protection System.
103Primary Filtration SystemDesign,Supply,Erection and Commissioning of Self Cleaning Primary Filtration System of 200 Micron at Intake or Suitable Pumping Station.
104Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
105Construction of RCC Footing for GI Pipe Support from the Intake to Barge including Earthwork in excavation, Soling of the Excavated Trenches for construction of footing, PCC, Centering and Shuttering, Supply, fitting and fixing of Rebar, RCC Works and embedding of the Structural member (ISMB Sections) in the footing all complete as directed at site ( Structural steel work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete is to be paid separately)
106Construction of Cofferdam & Diversion Channel
107Earth work in excavation in diversion/ Feeder channel to the designed section and grade by depositing the spoils in the form of embankment on either side in layers not exceeding 15 cm thick including clearing light jungles, Removing trees up to 15 cm dia and uprooting roots and stumps etc. from the seat of embankment and canal and free from all vegetation including breaking clods to not more than 10 mm cube, ramming, dressing, bailing out stagnant rain water where necessary complete as directed.B) In Hard soil (i) Soil mixed with gravel or moram upto 50 mm size
108Earthwork in filling in all soils in canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 km including paying compensation of earth obtained from private land if any loading, unloading, spreading the same in embankment in layers not exceeding 15 cm thick including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the breaking clods not more than 10 mm cube, ramming, dressing and roughening the seat of the embankment, profiling etc. with all lift complete as directed (Payment will be made after deduction of 12.50% shrinkage allowance from the gross quantity).
109Construction of whole Bamboo single pallasiding with matured bholuka bamboo post 7.5 cm to 10 cm dia 5 cm apart 1.5 m to 1.8 m above ground and 1.00 m to 1.2 m below ground with jati bamboo struts placed 1.2 m to 1.5 m apart tied with Galvanised wire with 16 G to 18 G complete with 3 rows of horizontal half jati bamboo kamies complete as directed.
110Supply and laying of cement bags filled with sand/ earth (as locally available) including stitching the mouth, laying, fixing in position as directed complete with supply of bags, sutlies etc.all complete.
111Earthwork for removing the cofferdam including depositing the earth near the canal embankment and slopes where necessary including removing the pitched boulders and stacking at safe distance in measurable stacks including ramming, dressing the earth etc. complete as directed.
112Construction of Headwork
113Preparing/making level of the ground surface for layout of headworks/ structures for fixing the required axis line by cutting the high land filling and levelling the low land where necessary
114Earthwork in excavation in foundation of structures by means of Hydraulic Excavator in all soils including mud, silt, sady clay from the river bed, etc, including clearing the side, dressing,etc.,and removing the earth by loading to dumpers for farther carrige to asafe distance, complete as directed .(0.30 CuM Bucket)
115Cost of dewatering in excavation of earthwork by running required no. of pumps including the cost of POL, hire charge, labour charge etc. and handling for a depth of maximum 3.2 M complete as directed.
116Providing and driving 'Z' type steel sheet pile of 0.69 M effective width, 8mm thick and average weight 68.30 kg/M to specified level and lines including cutting to proper size, making holes including painting sheet piles with two coats of anticorrosive bitumen paint and dewatering including necessary tools and plants and all other accessories complete as directed.(Portion of sheet pile to be embedded in concrete shall not be painted).
117CC work in proportion 1:4:8 in foundation/ abutment/ piers/ wing walls etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing and dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
118RCC work in slab, abutment cap and above abutment, pier cap, pedestals, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing, dewatering etc. complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
119Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
120Centering and shuttering including propping etc. Where necessary and removal of forms after completion of C.C. and RCC work complete as directed (measurement to be on the face area of timber).
121Providing scaffolding work with rows of Bhaluka bamboo and Jati bamboo horizontal one row jati bamboo cross and placing second class planks of 0.025 m thick in between the rows tying with coir strings lacing two nos. vertical jati bamboo at both end including dismantling the scaffolding etc. complete as directed.
122Collection of sand gravel (40% sand and 60% gravel of size 25 mm to 60 mm) free from dust and dirt including stacking in measurable stacks at quarry site and making payment of forest royalty etc. as directed complete.
123Collection of hard broken stone of size 6 mm to 20 mm from river boulder free from dust and dirt and foreign materials including stacking at quarry site, complete as directed. (in the gap of C.C. block protection)
124Labour charge for spreading of hard river gravel or broken stone of size 13 mm to 38 mm to the required thickness including dressing and ramming the seat before laying the materials as directed with a lead upto 30 M and lift upto 1.5 M complete as directed.
125Collection of one man size 25 cm to 30 cm hard river boulder including stacking in measurable stacks of not more than 1.00 M height at quarry site and making payment of forest royalty etc, complete as directed.
126Labour charge for pitching with one man size boulder including dressing and ramming the seat to proper size and slope, pitching etc. with local carriage of boulders from a distance of 60 M with lift upto 3 M complete as directed.
127Dewatering of CC works considering 1 no. 10 HP and 1 no. of 5 HP pump including POL, carriage and operator's pay etc. With Contractor's Profit & GST
128Supplying and mixing rapidite in concrete works below ground water level where necessary etc. complete as directed.
129Providing 75 mm dia. Weep Holes including supplying and fixing 75 mm dia PVC pipe in weep holes, complete as directed.
130Development of Approach Road
131Earthwork in excavation of foundation trenches including filling up sides of trenches and removal ofspoils after completion of foundation, dressing, ramming, shoring etc. complete including bailing out water, where necessary, in ordinary soil.
132Collection and supply of sand gravel (40% sand and 60% gravel of size 25 mm to 60 mm) free from dust and dirt including stacking in measurable stacks at quarry site and making payment of forest royalty etc. as directed complete. (Quarry distance = 100.00 Km)
133Labour charge for spreading of hard river gravel or broken stone of size 13 mm to 38 mm to the required thickness including dressing and ramming the seat before laying the materials as directed with a lead upto 30 M and lift upto 1.5 M complete as directed.
134Construction of Operator Shed
135Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift : 2.2.1 All kinds of soil
136Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
137Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(4.1.5) In prop 1 : 3 : 6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
138Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement:
1395.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement:
140Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.With silt (predominantly non plastic) by truck carriage including loading and unloading
14162 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
142Centering and shuttering including strutting, propping etc. and removal of form for :5.9.1 .Foundation, footings, bases of columns, etc. for mass concrete
1435.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
1445.9.6. Columns, pillars, piers, abutment, posts & strut
1455.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
1465.9.19. Weather shed, Chajjas, corbels etc including edges.
147Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above Plinth Level upto Floor V Level in all shapes and sizes in: Cement mortar 1:4 (1 cement : 4 coarse sand)
148Providing & applying a coat of residual petroleum bitumen of grade of Vg-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
149Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)(a) In cement mortar in proportion 1:4.
150Providing wood work in frame of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length( hold fast lugs or dash fastener shall be paid separately)
151Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hinges and necessary screws shall be paid separately)
152Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel csrews etc.
153Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
154Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approvedtexture, design and patterns as per CPWD Specification 2019, to be laid in true horizontallevel suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm oflength 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mmto formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed withGlavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixedon periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawingand as per directionsof the Engineer-in-Charge. With 15 mm thick Tegular edged light weight calcium silicate false ceiling tiles
15515mm thick cement plaster on rough side of single or half brick wall of mix
156Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level.
157Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer all complete.
158Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymercoated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers orwith G.I. limpet washers filled with white lead, including a coat of approved steel primer andtwo coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²
159Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
160Providing and fixing aluminium handles, ISI marked, anodized( anodic coating not less than grade AC 10 as per IS : 1868) transperent or dyed to required colour or share with necessary screws etc. complete.
161Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
162Providing and fixing bright finished brass tower bolts with necessary screws etc. complete.
163Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
164Applying priming coat With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood
165Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint ofapproved brand and manufacture
166Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel worksa) With ready mixed \\"red-lead / red oxide\\" primer.
167Construction of Pump House
168Preparing/making level of the ground surface for layout of headworks/ structures for fixing the required axis line by cutting the high land filling and levelling the low land where necessary
169Earthwork in excavation in foundation of structures by means of Hydraulic Excavator in all soils including mud, silt, sady clay from the river bed, etc, including clearing the side, dressing,etc.,and removing the earth by loading to dumpers for farther carrige to asafe distance, complete as directed .(0.30 CuM Bucket)
170Soling in foundation at all levels including filling intersides, ramming etc complete as directed and of specified thickness with 9 cmbrick on flat including sand packing.
171CC work in proportion 1:4:8 in foundation/ abutment/ piers/ wing walls etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing and dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
172RCC work in slab, abutment cap and above abutment, pier cap, pedestals, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing, dewatering etc. complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
173Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
174Centering and shuttering including propping etc. Where necessary and removal of forms after completion of C.C. and RCC work complete as directed (measurement to be on the face area of timber).
175Providing scaffolding work with rows of Bhaluka bamboo and Jati bamboo horizontal one row jati bamboo cross and placing second class planks of 0.025 m thick in between the rows tying with coir strings lacing two nos. vertical jati bamboo at both end including dismantling the scaffolding etc. complete as directed.
1761st class brick work in cement mortar inabutment and wingwall, parapet wall etc, including racking out joints and curing etc, complete as directed.
17712 mm cement plastering including clearing surface and curing, complete as directed.
178Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
179Construction of Reservoir
180Preparing/making level of the ground surface for layout of headworks/ structures for fixing the required axis line by cutting the high land filling and levelling the low land where necessary
181Earthwork in excavation in foundation of structures by means of Hydraulic Excavator in all soils including mud, silt, sady clay from the river bed, etc, including clearing the side, dressing,etc.,and removing the earth by loading to dumpers for farther carrige to asafe distance, complete as directed .(0.30 CuM Bucket)
182Soling in foundation at all levels including filling intersides, ramming etc complete as directed and of specified thickness with 9 cmbrick on flat including sand packing.
183CC work in proportion 1:4:8 in foundation/ abutment/ piers/ wing walls etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing and dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
184RCC work in slab, abutment cap and above abutment, pier cap, pedestals, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing, dewatering etc. complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
185Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
186Centering and shuttering including propping etc. Where necessary and removal of forms after completion of C.C. and RCC work complete as directed (measurement to be on the face area of timber).
187Providing scaffolding work with rows of Bhaluka bamboo and Jati bamboo horizontal one row jati bamboo cross and placing second class planks of 0.025 m thick in between the rows tying with coir strings lacing two nos. vertical jati bamboo at both end including dismantling the scaffolding etc. complete as directed.
18812 mm cement plastering including clearing surface and curing, complete as directed.
189construction of Spillway
190Jungle clearance on either side of the centre line of proposed track in plains and trough cuttings on both down hill side and on up hill side including cutting muli bamboo and tress below 15cm girth & removing out side the track as directed.
191Earth work in excavation of foundation trenches of Head work, sluice, cross drainage, canal regulator, aqueduct etc. including removing the excavated earth and refilling sides after completion of work by breaking clods, ramming, dressing etc. complete with lead up to 30m and lift up to 1.50m in soil mixed with gravel, boulder up to 1.00 m3 and laminated rock including bailing out water as directed complete.
192Cost of dewatering involved during earthwork in excavation of foundation trenches of canal structures (by pumps) in soil mixed with silt and sand etc. Dewatering by using 1 No. 10 HP and 2 Nos. 5 HP water pump.
193C.C. work in proportion 1:4:8 in foundation with hard broken stone aggregates of size 13mm to 38mm including curing, bailing out water with necessary timber shuttering, scaffolding where necessary complete as directed. ( shuttering, scaffolding cost will be paid separately).
194C.C. work in proportion 1:3:6 with hard broken stone aggregate of size 13mm to 38mm including curing, bailing out water with necessary timber shuttering, scaffolding etc. where necessary complete as directed.( shuttering, scaffolding cost will be paid separately).
195R.C.C. works in proportion 1:2:4 with hard broken stone aggregate of size 6 mm to 19 mm reinforced with proper reinforcement as per design including necessary curing etc. complete as directed. (payment of reinforcement , shuttering, scaffolding cost will be made separately).
196Supplying, fitting and fixing and laying of M.S. rod / Torsteel in reinforced cement concrete work including cutting, bending, binding with black wire and tying etc. complete as directed.
197Centering and shuttering including propping, nailing, bolting with earth oiling inside face etc. and removal of forms after completion of works of slab, RCC wall etc. complete as directed (measurement to be taken on the face area timbered).
198Collection and supply of one man size hard broken boulder including carriage within 200m radius and stacking in suitable measurable stacks at quarry site including payment of compensation, forest royality etc. complete as directed.
199Collection and supply of sand mixed with gravel up to 7.5cm from approved quarry including loading, unloading & stacking in measurable stack at work site up to height of 1.00m including payment of forest royality etc. ( considering quarry distance = 25.00 Km)
200Labour charge for pitching with one man size boulder including dressing and ramming the seat in proper size and slope with local carriage of boulders from a distance of 60m with lift up to 3m complete as directed .
201Labour charge for spreading of sand mixed with gravel to the required thickness including ramming and dressing the seat before the laying the materials complete as directed with lead up to 30m and lift up to 1.50m complete as directed.
202Dewatering by running sufficient Nos. of diesel driven pumps with necessary HP for carrying out C.C. works while sub-surface flow of water may obstruct in carry out the exacution of work as required as per instruction of department.
203Supplying and mixing rapidite in concrete works below ground water level where necessary etc. complete as directed.
204Supplying, fitting and fixing of 75 mm dia steel pipe inside concrete abutment / guard wall etc. at various levels as per drawing and specifications complete as directed.
205Supplying, fabricating,fitting and fixing the steel gates of Cross and Head Regulator as per design and drawing and specifications including supplying, fabricating, fitting and fixing operating platform including supplying steel beam, channel sectons, Rubber Seal etc embedded partly where necessary and manual operated hoisting equipments including carriage of all materials to work site complete as directed.
206Earthwork in back filling of structures, obtained from outside borrow pits filling in 15 cm layers, ramming, dressing, watering, including paying compensation of land if any (with lead up to 30 M and lift 1.5 M).
207Cofferdam & Diversion Channel
208Earth work in excavation in diversion/ Feeder channel to the designed section and grade by depositing the spoils in the form of embankment on either side in layers not exceeding 15 cm thick including clearing light jungles, Removing trees up to 15 cm dia and uprooting roots and stumps etc. from the seat of embankment and canal and free from all vegetation including breaking clods to not more than 10 mm cube, ramming, dressing, bailing out stagnant rain water where necessary complete as directed
209Earthwork in filling in all soils in canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 km including paying compensation of earth obtained from private land if any loading, unloading, spreading the same in embankment in layers not exceeding 15 cm thick including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the breaking clods not more than 10 mm cube, ramming, dressing and roughening the seat of the embankment, profiling etc. with all lift complete as directed (Payment will be made after deduction of 12.50% shrinkage allowance from the gross quantity).
210Construction of whole Bamboo single pallasiding with matured bholuka bamboo post 7.5 cm to 10 cm dia 5 cm apart 1.5 m to 1.8 m above ground and 1.00 m to 1.2 m below ground with jati bamboo struts placed 1.2 m to 1.5 m apart tied with Galvanised wire with 16 G to 18 G complete with 3 rows of horizontal half jati bamboo kamies complete as directed.
211Supply and laying of cement bags filled with sand/ earth (as locally available) including stitching the mouth, laying, fixing in position as directed complete with supply of bags, sutlies etc.all complete.
212Earthwork for removing the cofferdam including depositing the earth near the canal embankment and slopes where necessary including removing the pitched boulders and stacking at safe distance in measurable stacks including ramming, dressing the earth etc. complete as directed.
213Approach road
214Earthwork in excavation for diversion with channelisation in soil mixed with sand, gravel and different sizes of boulders upto man size byJCB/front loader excavator andmanual labour, removing the same to as a fe distance upto 1KM by means of vehicle nd depositing the spoil in the form of spoils embankment / bank as required at site including dressing grading and cutting the sides slopes etc. complete as directed by the department.
215Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
216Collection of sand gravel (40% sand and 60% gravel of size 25 mm to 60 mm) free from dust and dirt including stacking in measurable stacks at quarry site and making payment of forest royalty etc. as directed complete.
217Carriage of boulders, gravels, metal screening, stacking in measurable stacks at site complete as directed complete.
218Labour charge for spreading of hard river gravel or broken stone of size 13 mm to 38 mm to the required thickness including dressing and ramming the seat before laying the materials as directed with a lead upto 30 M and lift upto 1.5 M complete as directed.
219Canal Regulator at Main Canal
220Earthwork in excavation in foudation of canal structures to proper depth and grade as designed in hard strata of silt and clay deposits sandwiched therein gravals and all sizes of boulders constituting very hard mass and removing the excavated materials by head lead to a safe distance from the working place and refilling the side trenches of structure with ramming, compacting, dressing with all lead and lift as directed..
221CC work in proportion 1:4:8 in foundation / abutment /piers / wing walls etc. with hard river shingles of size 13mm to 38 mm including curing with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
222C.C work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone agg. of size 13 mm to 38 mm including curing with necessary timber shuttering, scaffolding etc.where necessary complete as directed. (Shuttering, scaffolding cost will be paid separately).
223RCC work in slab, abutment cap and above abutment, pier cap, pedestal, dirt wall etc. in proportion 1:1½:3 with hard river shingles of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing etc. complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
224Dewatering of CC works considering 1 no. 10 HP and 1 no. of 5 HP pump including POL, carriage and operator's pay etc. (ii) With Contractor's Profit & GST
225Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed.
226Centering and shuttering including propping etc where necessary and removal of forms after completion of CC and RCC works, complete as directed. (Measurement to be taken on the face area timbered). (Measure volume of concrete) :
22712 mm cement plastering including clearing surface and curing, complete as directed.
228Earthwork in back filling of structures, obtained from outside borrow pits filling in 15 cm layers, ramming, dressing, watering, including paying compensation of land if any (with lead up to 30 M and lift 1.5 M).
229Earthwork in filling in Marginal bund / Guide bank / Afflux bund / Canal embankment etc. to the design section and grade by obtaining earth from outside borrow pits and filling in uniform layers not exceeding 15 cm thick including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps from the seat of embankment and borrow pit area, breaking clods not more than 10 mm cube, ramming, watering, dressing and roughening the seat of embankment, profiling etc. Paying compensation of earth borrowed from private or forest land if any, lead upto 30 M and lift upto 1.5 M, complete as directed.. (A) With ordinary Soil
230Collection & supply of sand free from dust, dirt & other foreign materials from the approved quarry including screening, stacking and payment of necessary forest royalty including carrying to the work site etc. Complete as directed. Distance of work site from quarry @ 25 Km
231Carriage of boulder, gravels, metals, screening sand etc. by truck including loading, unloading and stacking in measurable stacks at site as directed complete. (for subsequent Km.)
232Labour charge for pitching with one man size boulder including dressing and ramming the seat to proper size and slope, pitching etc. with local carriage of boulders from a distance of 60 M with lift upto 3 M, complete as directed.
233Plain CC work in 40% plum hard river boulder 15cm to 23cm size and filled interstices with 60% of C.C. in prop. 1:3:6 of 13 mm to 38 mm aggregate including shuttering, curing etc. complete as directed. (Shuttering cost will be paid separately)
234Construction of 150mm dia HP
235Earthwork in excavation in foundation of canal structures in all types of soils as per design and drawing dressing the foundation, soaring etc. removing the surplus spoils by head load to safe distance from the working place and depositing the required spoils in uniform layers, dressing, watering, breaking clods to not more than 10 mm cube with compensation, complete as directed at site. (Including bailing out stagnant rain water where necessary).
236CC work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone aggregate of size 13 mm to 38 mm including curing, dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
237Supplying, fitting, fixing PVC pipes (IS 12818, 6 kg/cm2 ), joining pipes with relevant cement, levelling, testing leakages etc, complete as directed. (Cost of E/W foundation trenches will be paid separately).
238Supplying, fitting, fixing PVC bend pipe size joining with pipes with solvent cement, testing leakages etc,
239Centering and shuttering including propping, nailing,bolting with earth oiling inside face etc and removal of forms after completion of CC and RCC works etc,complete as directed. (Measurement to be taken on the face area timbered).(Abutment / Return Wall / Piers / Pedestal etc.)
24012 mm cement plastering including clearing surface and curing complete as directed. In prop. 1:4
241Earthwork in back filling of structures, obtained from outside borrow pits filling in 15 cm layers, ramming, dressing, watering, including paying compensation of land if any (with lead up to 30 M and lift 1.5 M).
242construction of Cattle and Cart Crossing (Clear Span = 1.50m)
243Earthwork in excavation in foundation of canal structures in all types of soils as per design and drawing including dressing in foundation, shoring etc. removing the surplus spoils by head load to safe distance from the working place and depositing the required spoils in uniform layers, dressing, watering, breaking clods to not more than 10 mm cube with compaction, complete as directed. (Including bailing out stagnant rain water where necessary).
244CC work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone aggregate of size 13 mm to 38 mm including curing, dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
245RCC work in slab, abutment cap and above abutment, pier cap, pedestal, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including curing etc, complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
246Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
247Centering and shuttering including propping, nailing, bolting with earth oiling inside face etc and removal of forms after completion of C.C and R.C.C works etc. complete as directed. (Measurement to be taken on the face area timbered).(Abutment / Return Wall / Piers / Pedestal etc.)
24812 mm thick cement plastering including clearing surface and curing complete as directed. In prop. 1:4
249Earthwork in back filling of structure, obtained from outside borrow pits filling in 15 cm layers, ramming, dressing, watering, including paying compensation of land if any (with lead up to 30 M and lift 1.5 M).
250Construction of RCC Canal
251Earth work in excavation in foundation of canal structure in all types of soils as per design and drawing including dressing the foundation, shoring etc. removing the surplus spoils by head load to a safe distance from the working place and depositing required spoils in uniform layers dressing, watering, breaking clods not more than 10mm cube with compensation etc. complete as directed. (Including bailing out stagnant rain water where necessary).
252CC work in proportion 1:3:6 in foundation / abutment /piers / wing walls etc. with hard broken stone aggregateof size 13 mm to 38 mm including curing, bailing out water with necessary timber shuttering, scaffolding etc. where necessary complete as directed. (Shuttering,scaffolding cost will be paid separately)
253Soling in foundation at all levels including filling intersides, ramming etc complete as directed and ofspecified thickness with 9 cm brick on flat including sand packing
254Supplying fitting fixing and laying reinforcement (TATA)in position in RCC work including cutting, bending,cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed.
255Centering and shuttering including propping, nailing,bolting with earth oiling inside face etc and removal of forms after completion of CC and RCC works etc,complete as directed. (Measurement to be taken on theface area timbered).
256RCC work in slab, abutment cap and above abutment, pier cap, pedestal, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including curing etc, complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
25712mm thick cement plastering including clearing surfaces and curing etc. complete as directed. (in propo. 1:4)
258Providing 50 mm wide expansion joints with bituminous compound mixed with coarse sand for canal work at an interval of 10.0 M apart including laying, fitting the compound in proper position, etc. complete as directed.
259Earth work in all soils in canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 Km. including paying compensation of earth obtained from private land if any, loading, unloading and stacking in measurable stacks not more than 1m height, spreading the same in 15 cm thick including clearing light jungles, removing trees up to 15cm dia uprooting roots and stumps etc. from the seat of embankment, profiling with all lift complete as directed. (Payment will be made after 12.5% shrinkage allowances from the gross quantity.)
260Earthen canal
261Earthwork in excavation in irrigation canal to the design section and grade by depositing the spoils in the form of embankment in 15 cm layers on both banks as necessaryi ncluding clearing light jungle,removing treesupto15cmdiaanduprooting roots andstumps etc.from the seat of the embankment and canal free fromallvegetationincludingbreakingclodsnotmorethan10 mm cube, ramming,dressing and roughening the seat of the embankment with alead upto 30M and lift upto1.50 M, complete as directed. B. in hard soil i)Soil with gravel or morum upto 50 mm size
262Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
263Construction of Aqueduct
264Earthwork in excavation in foundation of canal structures in all types of soils as per design and drawing including dressing the foundation, shoring etc. removing the surplus spoils by head load to safe distance from the working place and depositing the required spoils in uniform layers, dressing, watering, breaking clods to notmore than 10 mm cube with compensation, complete as directed at site. (Including bailing out stagnant rainwater where necessary). B) in soil mixed with gravel and boulder upto 30 cm size
265Dewatering of Ccworks considering 1no.10HP and1 no. of 5HP pump including POL,carriage and operator's pay etc. ii)With Contractor's Profit & GST
266CC work in proportion 1:4:8 in foundation / abutment /piers / wing walls etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
267Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed.
268Centering and shuttering including propping etc where necessary and removal of forms after completion of CC and RCC works, complete as directed. (Measurement to be taken on the face area timbered).(Abutment/returning Wall/ Piers / Pedestal etc.) (i) 19 mm thick plyboard
269RCC work in slab, abutment cap and above abutment, pier cap ,pedestral, dirtwall etc. in proportion 1:1.5:3 with hard broken stone aggregate of size 6mm to 20mm with proper reinforcement as per design including necessary curing, dewatering etc. complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
270Supplying of quick setting concrete admixture of specified brand including loading and unloading, carriage to the work site, complete as directed.
27112 mm cement plaster including clearing surface and curing, complete as directed. (II) In prop 1:4
272Earthwork inback fillingof structures, obtained from outsideborrowpits filling in15 cmlayers, ramming,dressing, watering, including paying compensation of land if any (with lead up to 30 M and lift 1.5 M).
273construction of Sign Board at Head Work site
274Earthwork in excavation of irrigation canal to the design section and grade by depositing the spoils in the form of embankment in 15cm layers on both banks as necessary including clearing light jungles, removing trees upto 15cm dia and up rooting roots and stupms etc. from the seat of embankment and the canal and free from all vegetations including breaking clods not more than 10mm cube, ramming, dressing and roughening the seat of the embankmant with a lead upto 30m and lift upto 1.50m complete as directed.
275CC work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone aggregate of size 13 mm to 38 mm including curing, dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
276Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
277Centering and shuttering including propping etc. where necessary and removal of forms after completion of C.C. and RCC works complete as directed. (measurement to be on the face area of timbered).
278Centering and shutterinRCC work in slab, abutment cap and above abutment, pier cap, pedestal, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including curing etc, complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
27912 mm thick cement plastering including clearing surface and curing complete as directed. In prop. 1:4
280Lettering of sign board with approved paint.
281Construction of Operator Shed
282Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift : 2.2.1 All kinds of soil
283Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
284Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(4.1.5) In prop 1 : 3 : 6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
285Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement:
286(B) In superstructure Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement:
287Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.With silt (predominantly non plastic) by truck carriage including loading and unloading
28862 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
289Centering and shuttering including strutting, propping etc. and removal of form for :5.9.1 .Foundation, footings, bases of columns, etc. for mass concrete
2905.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
2915.9.6. Columns, pillars, piers, abutment, posts & strut
2925.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
2935.9.19. Weather shed, Chajjas, corbels etc including edges.
294Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above Plinth Level upto Floor V Level in all shapes and sizes in: Cement mortar 1:4 (1 cement : 4 coarse sand)
295Providing & applying a coat of residual petroleum bitumen of grade of Vg-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
296Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)(a) In cement mortar in proportion 1:4.
297Providing wood work in frame of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length( hold fast lugs or dash fastener shall be paid separately)
298Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hinges and necessary screws shall be paid separately)
299Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel csrews etc.
300Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
301Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approvedtexture, design and patterns as per CPWD Specification 2019, to be laid in true horizontallevel suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm oflength 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mmto formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed withGlavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixedon periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawingand as per directionsof the Engineer-in-Charge. With 15 mm thick Tegular edged light weight calcium silicate false ceiling tiles
30215mm thick cement plaster on rough side of single or half brick wall of mix
303Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level.
304Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer all complete.
305Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymercoated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers orwith G.I. limpet washers filled with white lead, including a coat of approved steel primer andtwo coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²
306Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
307Providing and fixing aluminium handles, ISI marked, anodized( anodic coating not less than grade AC 10 as per IS : 1868) transperent or dyed to required colour or share with necessary screws etc. complete.
308Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
309Providing and fixing bright finished brass tower bolts with necessary screws etc. complete.
310Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
311Applying priming coat With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood
312Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint ofapproved brand and manufacture
313Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel worksa) With ready mixed \\"red-lead / red oxide\\" primer.
314Earthen H/W & Diversion Channel Path FIS
315Preparing/making level of the ground surface for layout of headworks/ structures for fixing the required axis line by cutting the high land filling and levelling the low land where necessary
316Earthwork in excavation in foundation of structures by means of Hydraulic Excavator in all soils including mud, silt, sady clay from the river bed, etc, including clearing the side, dressing,etc.,and removing the earth by loading to dumpers for farther carrige to asafe distance, complete as directed .(0.30 CuM Bucket)A. Upto river bed level
317Earth work in excavation in diversion/ Feeder channel to the designed section and grade by depositing the spoils in the form of embankment on either side in layers not exceeding 15 cm thick including clearing light jungles, Removing trees up to 15 cm dia and uprooting roots and stumps etc. from the seat of embankment and canal and free from all vegetation including breaking clods to not more than 10 mm cube, ramming, dressing, bailing out stagnant rain water where necessary complete as directed.
318Earthwork in filling in all soils in canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 km including paying compensation of earth obtained from private land if any loading, unloading, spreading the same in embankment in layers not exceeding 15 cm thick including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the breaking clods not more than 10 mm cube, ramming, dressing and roughening the seat of the embankment, profiling etc. with all lift complete as directed (Payment will be made after deduction of 12.50% shrinkage allowance from the gross quantity).
319Construction of whole Bamboo single pallasiding with matured bholuka bamboo post 7.5 cm to 10 cm dia 5 cm apart 1.5 m to 1.8 m above ground and 1.00 m to 1.2 m below ground with jati bamboo struts placed 1.2 m to 1.5 m apart tied with Galvanised wire with 16 G to 18 G complete with 3 rows of horizontal half jati bamboo kamies complete as directed.
320Supply and laying of cement bags filled with sand/ earth (as locally available) including stitching the mouth, laying, fixing in position as directed complete with supply of bags, sutlies etc.all complete.
321Approach road
322Earthwork in excavation for diversion with channelisation in soil mixed with sand, gravel and different sizes of boulders upto man size byJCB/front loader excavator andmanual labour, removing the same to as a fe distance upto 1KM by means of vehicle nd depositing the spoil in the form of spoils embankment / bank as required at site including dressing grading and cutting the sides slopes etc. complete as directed by the department.
323Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
324Collection of sand gravel (40% sand and 60% gravel of size 25 mm to 60 mm) free from dust and dirt including stacking in measurable stacks at quarry site and making payment of forest royalty etc. as directed complete.
325Carriage of boulders, gravels, metal screening, stacking in measurable stacks at site complete as directed complete.
326Labour charge for spreading of hard river gravel or broken stone of size 13 mm to 38 mm to the required thickness including dressing and ramming the seat before laying the materials as directed with a lead upto 30 M and lift upto 1.5 M complete as directed.
327Construction of RCC Canal
328Earth work in excavation in foundation of canal structure in all types of soils as per design and drawing including dressing the foundation, shoring etc. removing the surplus spoils by head load to a safe distance from the working place and depositing required spoils in uniform layers dressing, watering, breaking clods not more than 10mm cube with compensation etc. complete as directed. (Including bailing out stagnant rain water where necessary).
329CC work in proportion 1:3:6 in foundation / abutment /piers / wing walls etc. with hard broken stone aggregateof size 13 mm to 38 mm including curing, bailing out water with necessary timber shuttering, scaffolding etc. where necessary complete as directed. (Shuttering,scaffolding cost will be paid separately)
330Soling in foundation at all levels including filling intersides, ramming etc complete as directed and ofspecified thickness with 9 cm brick on flat including sand packing
331Supplying fitting fixing and laying reinforcement (TATA)in position in RCC work including cutting, bending,cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed.
332Centering and shuttering including propping, nailing,bolting with earth oiling inside face etc and removal of forms after completion of CC and RCC works etc,complete as directed. (Measurement to be taken on theface area timbered).
333RCC work in slab, abutment cap and above abutment, pier cap, pedestal, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including curing etc, complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
33412mm thick cement plastering including clearing surfaces and curing etc. complete as directed. (in propo. 1:4)
335Providing 50 mm wide expansion joints with bituminous compound mixed with coarse sand for canal work at an interval of 10.0 M apart including laying, fitting the compound in proper position, etc. complete as directed.
336Earth work in all soils in canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 Km. including paying compensation of earth obtained from private land if any, loading, unloading and stacking in measurable stacks not more than 1m height, spreading the same in 15 cm thick including clearing light jungles, removing trees up to 15cm dia uprooting roots and stumps etc. from the seat of embankment, profiling with all lift complete as directed. (Payment will be made after 12.5% shrinkage allowances from the gross quantity.)
337Earthen canal Path FIS
338Earthwork in excavation in irrigation canal to the design section and grade by depositing the spoils in the form of embankment in 15 cm layers on both banks as necessaryi ncluding clearing light jungle,removing treesupto15cmdiaanduprooting roots andstumps etc.from the seat of the embankment and canal free fromallvegetationincludingbreakingclodsnotmorethan10 mm cube, ramming,dressing and roughening the seat of the embankment with alead upto 30M and lift upto1.50 M, complete as directed. B. in hard soil i)Soil with gravel or morum upto 50 mm size
339Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
340construction of Sign Board at Head Work site Path FIS
341Earthwork in excavation of irrigation canal to the design section and grade by depositing the spoils in the form of embankment in 15cm layers on both banks as necessary including clearing light jungles, removing trees upto 15cm dia and up rooting roots and stupms etc. from the seat of embankment and the canal and free from all vegetations including breaking clods not more than 10mm cube, ramming, dressing and roughening the seat of the embankmant with a lead upto 30m and lift upto 1.50m complete as directed.
342CC work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone aggregate of size 13 mm to 38 mm including curing, dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
343Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
344Centering and shuttering including propping etc. where necessary and removal of forms after completion of C.C. and RCC works complete as directed. (measurement to be on the face area of timbered).
345Centering and shutterinRCC work in slab, abutment cap and above abutment, pier cap, pedestal, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including curing etc, complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
34612 mm thick cement plastering including clearing surface and curing complete as directed. In prop. 1:4
347Lettering of sign board with approved paint.
348Canal Regulator at Main Canal Path FIS
349Earthwork in excavation in foudation of canal structures to proper depth and grade as designed in hard strata of silt and clay deposits sandwiched therein gravals and all sizes of boulders constituting very hard mass and removing the excavated materials by head lead to a safe distance from the working place and refilling the side trenches of structure with ramming, compacting, dressing with all lead and lift as directed..
350CC work in proportion 1:4:8 in foundation / abutment /piers / wing walls etc. with hard river shingles of size 13mm to 38 mm including curing with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
351C.C work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone agg. of size 13 mm to 38 mm including curing with necessary timber shuttering, scaffolding etc.where necessary complete as directed. (Shuttering, scaffolding cost will be paid separately).
352RCC work in slab, abutment cap and above abutment, pier cap, pedestal, dirt wall etc. in proportion 1:1½:3 with hard river shingles of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing etc. complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
353Dewatering of CC works considering 1 no. 10 HP and 1 no. of 5 HP pump including POL, carriage and operator's pay etc. (ii) With Contractor's Profit & GST
354Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed.
355Centering and shuttering including propping etc where necessary and removal of forms after completion of CC and RCC works, complete as directed. (Measurement to be taken on the face area timbered). (Measure volume of concrete) :
35612 mm cement plastering including clearing surface and curing, complete as directed.
357Earthwork in back filling of structures, obtained from outside borrow pits filling in 15 cm layers, ramming, dressing, watering, including paying compensation of land if any (with lead up to 30 M and lift 1.5 M).
358Earthwork in filling in Marginal bund / Guide bank / Afflux bund / Canal embankment etc. to the design section and grade by obtaining earth from outside borrow pits and filling in uniform layers not exceeding 15 cm thick including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps from the seat of embankment and borrow pit area, breaking clods not more than 10 mm cube, ramming, watering, dressing and roughening the seat of embankment, profiling etc. Paying compensation of earth borrowed from private or forest land if any, lead upto 30 M and lift upto 1.5 M, complete as directed.. (A) With ordinary Soil
359Collection & supply of sand free from dust, dirt & other foreign materials from the approved quarry including screening, stacking and payment of necessary forest royalty including carrying to the work site etc. Complete as directed. Distance of work site from quarry @ 25 Km
360Carriage of boulder, gravels, metals, screening sand etc. by truck including loading, unloading and stacking in measurable stacks at site as directed complete. (for subsequent Km.)
361Labour charge for pitching with one man size boulder including dressing and ramming the seat to proper size and slope, pitching etc. with local carriage of boulders from a distance of 60 M with lift upto 3 M, complete as directed.
362Plain CC work in 40% plum hard river boulder 15cm to 23cm size and filled interstices with 60% of C.C. in prop. 1:3:6 of 13 mm to 38 mm aggregate including shuttering, curing etc. complete as directed. (Shuttering cost will be paid separately)
363Supplying, fabricating,fitting and fixing the steel gates of Cross and Head Regulator as per design and drawing and specifications including supplying, fabricating, fitting and fixing operating platform including supplying steel beam, channel sectons, Rubber Seal etc embedded partly where necessary and manual operated hoisting equipments including carriage of all materials to work site complete as directed.
364Construction of 150mm dia HP Path FIS
365Earthwork in excavation in foundation of canal structures in all types of soils as per design and drawing dressing the foundation, soaring etc. removing the surplus spoils by head load to safe distance from the working place and depositing the required spoils in uniform layers, dressing, watering, breaking clods to not more than 10 mm cube with compensation, complete as directed at site. (Including bailing out stagnant rain water where necessary).
366CC work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone aggregate of size 13 mm to 38 mm including curing, dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
367Supplying, fitting, fixing PVC pipes (IS 12818, 6 kg/cm2 ), joining pipes with relevant cement, levelling, testing leakages etc, complete as directed. (Cost of E/W foundation trenches will be paid separately).
368Supplying, fitting, fixing PVC bend pipe size joining with pipes with solvent cement, testing leakages etc,
369Centering and shuttering including propping, nailing,bolting with earth oiling inside face etc and removal of forms after completion of CC and RCC works etc,complete as directed. (Measurement to be taken on the face area timbered).(Abutment / Return Wall / Piers / Pedestal etc.)
37012 mm cement plastering including clearing surface and curing complete as directed. In prop. 1:4
371Earthwork in back filling of structures, obtained from outside borrow pits filling in 15 cm layers, ramming, dressing, watering, including paying compensation of land if any (with lead up to 30 M and lift 1.5 M).
372construction of Cattle and Cart Crossing (Clear Span = 1.50m) PATH FIS
373Earthwork in excavation in foundation of canal structures in all types of soils as per design and drawing including dressing in foundation, shoring etc. removing the surplus spoils by head load to safe distance from the working place and depositing the required spoils in uniform layers, dressing, watering, breaking clods to not more than 10 mm cube with compaction, complete as directed. (Including bailing out stagnant rain water where necessary).
374CC work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone aggregate of size 13 mm to 38 mm including curing, dewatering with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
375RCC work in slab, abutment cap and above abutment, pier cap, pedestal, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including curing etc, complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
376Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
377Centering and shuttering including propping, nailing, bolting with earth oiling inside face etc and removal of forms after completion of C.C and R.C.C works etc. complete as directed. (Measurement to be taken on the face area timbered).(Abutment / Return Wall / Piers / Pedestal etc.)
37812 mm thick cement plastering including clearing surface and curing complete as directed. In prop. 1:4
379Earthwork in back filling of structure, obtained from outside borrow pits filling in 15 cm layers, ramming, dressing, watering, including paying compensation of land if any (with lead up to 30 M and lift 1.5 M).
380construction of Temporary operator shed
381Construction of temporary shed with bholuka bamboo post of 3.00m high, 1.80m apart driven atleast 45cm below ground with muli bamboo roof frame and double tarza wall and plastering and white washing two coats with 2 Nos. dharamat doors and windows including bamboo maching 2.00m x 0.90m size and 10cm thick thatch roofing etc. complete as directed.
382Construction of pit latrine size 1.22m x 1.22m with 15.24cm to 20.22 cm dia wooden post, double tarza wall, dhapdoor 1.85m x 1.00m size with 7.62 x 7.62cm 1st class local wood chowkhat 10.16cm sungrass thatching over bamboo roof frame and flooring with wooden plank 38mm as per departmental specification complete.
383Providing double lattice pattern jati bamboo fencing 100mm to 150mm mesh, 90cm to 120cm high complete with double jati bamboo stiffners 20mm to 25mm wide with three lines and half bamboo on top and bhaluka bamboo post placed 180cm apart and driven 45cm below ground.
384Development of Pressurized Pipe Irrigation Network
385Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soilUpto 80mm dia.
38680mm to 300mm dia
387300mm to 600mm dia
388Above 600mm dia
389Providing and Laying of HDPE Pipes conforming to IS 4984:2016 (supply up to 110 mm dia. in coil and above 110 mm dia. in straight lengths), and laying and jointing of HDPE pipes by electrofusion welding using suitable electrofusion couplers, saddles and other necessary electrofusion fittings, including surface preparation, alignment, clamping, scraping, heating, fusion and cooling as per the manufacturer’s recommendations and relevant applicable standards, to the required alignment and gradient, including testing of the pipeline to the required pressure, complete in all respects.HDPE (PE-100) PN-6 PIPELINE - 63mm
390HDPE (PE-100) PN-6 PIPELINE - 75mm
391HDPE (PE-100) PN-6 PIPELINE - 90mm
392HDPE (PE-100) PN-6 PIPELINE - 110mm
393HDPE (PE-100) PN-6 PIPELINE - 125mm
394HDPE (PE-100) PN-6 PIPELINE - 140mm
395HDPE (PE-100) PN-6 PIPELINE - 160mm
396HDPE (PE-100) PN-6 PIPELINE - 180mm
397HDPE (PE-100) PN-6 PIPELINE - 200mm
398HDPE (PE-100) PN-6 PIPELINE - 225mm
399HDPE (PE-100) PN-6 PIPELINE - 250mm
400HDPE (PE-100) PN-6 PIPELINE - 280mm
401HDPE (PE-100) PN-6 PIPELINE - 315mm
402HDPE (PE-100) PN-6 PIPELINE - 355mm
403HDPE (PE-100) PN-6 PIPELINE -400mm
404HDPE (PE-100) PN-6 PIPELINE - 450mm
405HDPE (PE-100) PN-6 PIPELINE - 500mm
406HDPE (PE-100) PN-6 PIPELINE - 560mm
407HDPE (PE-100) PN-6 PIPELINE - 630mm
408HDPE (PE-100) PN-6 PIPELINE - 710mm
409HDPE (PE-100) PN-6 PIPELINE - 800mm
410HDPE (PE-100) PN-6 PIPELINE - 900mm
411HDPE (PE-100) PN-6 PIPELINE - 1000mm
412HDPE (PE-100) PN-8 PIPELINE - 355mm
413HDPE (PE-100) PN-8 PIPELINE -400mm
414HDPE (PE-100) PN-8 PIPELINE - 450mm
415HDPE (PE-100) PN-8 PIPELINE - 500mm
416HDPE (PE-100) PN-8 PIPELINE - 560mm
417HDPE (PE-100) PN-8 PIPELINE - 630mm
418HDPE (PE-100) PN-8 PIPELINE - 710mm
419HDPE (PE-100) PN-8 PIPELINE - 800mm
420HDPE (PE-100) PN-8 PIPELINE - 900mm
421HDPE (PE-100) PN-8 PIPELINE - 1000mm
422HDPE (PE-100) PN-10 PIPELINE - 355mm
423HDPE (PE-100) PN-10 PIPELINE -400mm
424HDPE (PE-100) PN-10 PIPELINE - 450mm
425HDPE (PE-100) PN-10 PIPELINE - 500mm
426HDPE (PE-100) PN-10 PIPELINE - 560mm
427HDPE (PE-100) PN-10 PIPELINE - 630mm
428HDPE (PE-100) PN-10 PIPELINE - 710mm
429HDPE (PE-100) PN-10 PIPELINE - 800mm
430HDPE (PE-100) PN-10 PIPELINE - 900mm
431HDPE (PE-100) PN-10 PIPELINE - 1000mm
432HDPE SPECIALS FOR HDPE PIPELINE: Providing, supplying, laying and jointing of all necessary HDPE Specials and fittings, including bends, tees, reducers, couplers, electrofusion fittings, electrofusion saddles, flanged adaptors, stub ends, backing flanges/rings, service saddles, end caps and other specials/fittings required for complete execution of the HDPE pipeline, conforming to IS 4984:2016, relevant applicable standards and approved specifications, complete as directed by the Engineer-in-Charge. The quantity/value of HDPE Specials shall be restricted to 2% of the total certified/billed amount under the relevant HDPE Pipe items. For BOQ purposes, the rate shall be considered as ₹1.00 and the quantity shall be equivalent to 2% of the total amount actually certified/billed against the relevant HDPE Pipe items. (Lump Sum)
433Supply and delivery of DI Pipes as per IS : 8329/2000 including cost and conveyance, excluding taxes etc. complete.including transportation charges and Loading, unloading and stacking,Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No. 3114 / 1994), Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987DI (K-7) PIPELINE300
434350 mm
435400 mm
436500 mm
437DI SPECIALS FOR DI (K-7) PIPELINE: Providing, supplying, laying and jointing of all necessary DI Specials and fittings, including bends, tees, reducers, collars, flanged adaptors, dismantling joints, puddle flanges and other specials required for complete execution of the DI (K-7) pipeline, conforming to relevant applicable standards and approved specifications, complete as directed by the Engineer-in-Charge. The quantity/value of DI Specials shall be restricted to 2% of the total certified/billed amount under Sl. Nos. 1 & 2 (DI Pipes). For BOQ purposes, the rate shall be ₹1.00 and the quantity shall be equivalent to 2% of the total amount actually billed under DI Items.
438Design, Supply, Erection and Commissioning of Village Management System (VMS) in Village for Flow Control/Pressure Control/Metering/ON-OFF from Remote as and when required for Isolation of downward Network and ease of commissioning.
439Design, Supply, Erection and Commissioning of Air Management System consist of Air Valve with Isolation Valves along with AMS Control Unit for Burst Monitoring by Pressure Monitoring at Air Valve Location in Distribution Network
440Design, Supply, Erection and Commissioning of Outlet Management System (OMS) with Rotation for 5 Ha at 30 Ha for Flow/Pressure Control/Metering/ON-OFF from Remote as and when required for equitable distribution of water.
441Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.complete.Sluice valves - PN -1.6 (With by pass arrangement) 100MM
442Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete.(Rate for all class of valves.)100MM
443Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation /structural steel support. Butterfly valve - PN - 1.6 (With by pass arrangement) 500 mm.
444Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)500MM
445Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve,small orifice elastic ball resting on a gun metal orifice nipple,large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled,including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc.complete.Kinetic Air Valve Flanged Type - PN - 140 mm.
44650 mm.
44780 mm.
448100 mm.
449Lowering, laying and fixing in proper alignment andpositionall types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete.(for all class of valves).Kinetic Air Valve Flanged Type - PN - 140 mm.
45050 mm.
45180 mm.
452100 mm.
453Construction of Control Room and Operational Infrastructure
454Item No. 1: Earthwork in excavation trenches of walls, retaining walls, footing of columns, steps and septic tank including refilling (return filling) the quantity as necessary after completion of works, breaking clods in return filling, dressing, ramming, watering etc. and removal of surplus earth with all lead and lift upto 2 metre as directed and specified in following classification of soils, including bailing out of water where necessary upto depth below the existing groundlevel as mentioned in the approved drawing andcomplete as directed and specified.(A) In ordinary soil
455Item No. 2:Soling in foundation at all levels including filling intersides, ramming etc complete as directed and of specified thickness with 9 cm brick on flat including sand packing.
456Item No. 3: CC Work in proportion 1:3:6 in foundation /abutment/ pier/wing walls etc. with hard broken stone aggregate of size 13 to 38 mm including curing with necessary shuttering , Scafolding etc. where necessary, complete as directed. (shuttering where necessary shall be measured and paid separately).
457Item No. 4:Brick work in cement mortar with 1st class brick as directde in foundation, retaining walls, plinth & steps including recking out joints & curing
458Item No. 5:Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by truck carriage for a minimum distance of 4 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
459Item No. 6:Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
460Item No. 7:Form work -Centering and shuttering including propping etc where necessary and removal of forms after completion of CC and RCC works as directed complete. (Measurement to be taken on the face area timbered).Item No. 7.1:(C) Shuttering (Column)
461Item No. 7.2:Tie beam
462Item No. 7.3:Lintel
463Item No. 7.4: Chajja
464Item No. 7.5:Ceiling Beam
465Item No. 7.8 :Slab
466Item No. 8 : RCC work in slab, abutment cap and above abutment, pier cap, pedestals, dirt wall etc. in proportion 1:1½:3 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing, dewatering etc. complete as directed with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately)
467Item No. 9: Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level.(a) In cement mortar in proportion 1:4.(1 cement:4 sand)
468Item No. 10: 12 mm cement plastering including clearing surface and curing complete as directed.(ii) In proportion 1:4
469Item No. 11 : Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece
470Item No. 12:Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old works (one or more coats).
471Item No. 13:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
472Item No. 14: 65 mm thick traced flooring with cement concrete in prop 1:2:4 with broken stone agg. of size 6 mm to 20 mm over one 1st class brick flat soling including sand packing of the voids in between the bricks, watering, ramming properly where necessary etc. complete and 12 mm thick cement plastering. Finishing on top trowelling altering curing complete as directed. (Brick soling to be paid seperately).
473Establishment of Communication network and cloud-based Automation Command Centers
474Design, Supply, Erection and Commissioning of Automation System for Pumping Station including PLC, Instruments,Flowmeters etc. And System –Distribution Connectivity in the Distribution Network
475Earthen Dam for Closing of Channel with Hume Pipe Culvert to escape of excess water
476Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
477Earthwork in cutting in river bank etc. to the design section and grade and removing the spoils to a safe distance including cutting, uprooting and removing trees upto 15 cm dia, uprooting and removing roots and stumps etc, including excavating the earth boulder sausages of 1.00 M dia, 50 cm under river bed shape, size and grade etc. with all lead and lift, complete as directed.
478Construction of 1.50 M x 1.00 M rectangular boulder sausage including supplying of materials with 25 cm to 30 cm size boulders collecting from a lead of 25 KM encased in 15 cm mesh of 8G hexagonal wire netting and filling the voids between the boulders with stone not exceeding 18 cm in size tied with 8G galvanized tying wire at 30 cm apart, laid in position as directed including necessary local carriage of materials, paying necessary forest royalty including providing 1 (one) no. of jati bamboo horizontal runner along the top of the sausage with vertical bhaluka bamboo post 1.20 M apart driven at least 0.60 M below ground and tying with sausage etc, all complete as directed.
479CC work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone aggregate of size 13 mm to 38 mm including curing with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
480Collection and supply of sand gravel (40% sand and 60% gravel of size 25 mm to 60 mm) free from dust and dirt including stacking in measurable stacks at quarry site and making payment of forest royalty etc. as directed complete. (Quarry distance = 100.00 Km)
481Labour charge for spreading of hard river gravel or broken stone of size 13 mm to 38 mm to the required thickness including dressing and ramming the seat before laying the materials as directed with a lead upto 30 M and lift upto 1.5 M complete as directed.
482Earthwork in excavation trenches of walls, retaining walls, footing of columns, steps and septic tank including refilling (return filling) the quantity as necessary after completion of works, breaking clods in return filling, dressing, ramming, watering etc. and removal of surplus earth with all lead and lift upto 2 metre as directed and specified in following classification of soils, including bailing out of water where necessary upto depth below the existing ground level as mentioned in the approved drawing and complete as directed and specified.
483C.C. works in prop 1:4:8 in foundation with stone aggregate size 13mm to 38mm including bailing out water curing, shuttering etc. Complete as directed (Cost of shuttering will be measured and paid separately) - WITH HARD BROKEN STONE AGGREGATE 13 MM TO 38 MM
484Soling in foundation at all levels including filling intersides, ramming etc complete as directed and of specified thickness with 9 cm brick on flat including sand packing.
485Centering and shuttering including propping etc where necessary and removal of forms after completion of CC and RCC works, complete as directed. (Measurement to be taken on the face area timbered).
486CC work in proportion 1:1½:3 with hard broken river stone aggregate of size 6 mm to 20 mm including curing, with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
487Supply of Hume pipe of dia.900 mmdia NP3 of 2.50m length
488Labour for fitting and fixing hume pipe in position with collars including joining the cement mortar in proportion 1:3 and curing, including carrying the same from godown to site and complete as directed. iii) For 90 cm to 120 cm dia
489Construction of RCC Chambers and Associated Structures for Pressurized Pipe Irrigation Network (Spout Chambers in the Pipe Network)
490Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
491Item No.2:-.Soling in foundation at all levels including fillingSoling in foundation at all levels including filling intersides, ramming etc complete as directed and of specified thickness with 9 cm brick on flat including sand packing.
492Item No. 3: C.C work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone agg. of size 13 mm to 38 mm including curing with necessary timber shuttering, scaffolding etc.where necessary complete as directed. (Shuttering, scaffolding cost will be paid separately).
493Item No. 4 : 1st class brick work in cement mortar in abutment and wing wall, parapet wall etc.including racking out joints and curing etc. complete. (In proportion 1:4)
494Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
495Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
496Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
497CEMENT PLASTER (IN FINE SAND) 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)
498Item No.6 : Supplying, fitting, fixing 110 mm dia PVC Rising pipe from the toe of main line including local carriage, testing leakage etc. complete as directed.
499Item No.7 : Supplying, fitting, fixing PVC bend pipe size joining with pipes with solvent cement, testing leakages etc. complete as directed.
500Item No. 8 : Supplying, fitting, fixing PVC Pipes (IS 12818, 4 kg/cm2), joining pipes with relevant cement, levelling, testing leakages etc. complete as directed. (Cost of E/W foundation trenches will be paid separately).
501Construction of Site Infrastructure and Associated Project Facilities ( Assam Type Operator Rest House)
502Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. In all types of soil.
503Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
504Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Concrete of M20 grade with minimum cement content of 270 kg /cum
505Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
506(B)In super structure from plinth level up to 1st floor level(ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) (b) M20 Grade concrete.
507Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) ncluding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20mm nominal size (Recycled Concrete Aggregate (RCA) upto 25%))
508Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete
509Lintels, beams, plinth beams, girders, bressumers and cantilevers
510Columns, Pillars, Piers, Abutments, Posts and Struts
511Lintels, beams, plinth beams, girders, bressumers and cantilevers
512Suspended floors, roofs, landings, balconies and access platform
513Soling in foundation and under floor including filling interstices, ramming etc, complete as directed and as specified thickness. (i) 9 cm brick on flat including sand packing.
514Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (b) in prop. 1:4
515Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor fivelevel. (a) In cement mortar in proportion 1:4.(1 cement:4 sand)
516Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.
517PLASTERING AND POINTING WORKS:- 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
518Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.-Kiln seasoned and chemically treated hollock wood
519Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
520Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.30 mm thick
521IRON AND STEEL WORKS;- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
522Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc.
523Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Square Hollow Section 50mm x 50mm x 1.6mm
524PAINTING WORKS:- Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
525ROOFING WORKS:-Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
526Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete 12.51.1 Ridges plain (500 - 600mm) -(e) 0.63 mm thick,(ii) 230 mm lapping
527PLINTH PROTECTION WORKS/DRAIN/ SANITARY:- Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
528Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :19.1.2 150 mm diameter
529Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
530Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:17.1.1 White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests
531Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250 mm
532Flooring:- Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gently .and easily. Double charge vitrified tile polished finish of Size of Tile 600 x 600 mm
533Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
534Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
535Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete ( frame work to be paid separately): Natural colour insulating board. 12mm thick
536Electrification ,Snitary and Plumbing works- LS @ 20% of total amount
537Construction of Site Infrastructure and Associated Project Facilities ( Approach Road )
538Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by cart carriage for a minimum distance of 1 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
539Collection and supply of sand gravel (40% sand and 60% gravel of size 25 mm to 60 mm) free from dust and dirt including stacking in measurable stacks at quarry site and making payment of forest royalty etc. as directed complete. (Quarry distance = 100.00 Km)
540Labour charge for spreading of hard river gravel or broken stone of size 13 mm to 38 mm to the required thickness including dressing and ramming the seat before laying the materials as directed with a lead upto 30 M and lift upto 1.5 M complete as directed.
541Construction of Site Infrastructure and Associated Project Facilities ( Sign Board )
542Supply of sign board made of 1.60mm thick MS iron sheet fitted with steel frame of size 1.05 m x 0.75m fixed with 2 Nos. 50mm dia GI (medium) pipes 2.10m above and 0.60m below ground fitted with C.C. work in proportion 1:3:6 and size 0.45m x 0.45m x 0.60m below ground including painting with approved paint including writing letters complete as directed.
543Riverbank Protection, Stabilization and Erosion Control Works
544Item No. 1 : Collection and supply of blasted boulder of size 25 cm to 30 cm including stacking at quarry site, complete as directed.
545Item No. 2 : Labour charge for pitching with one man size boulder including dressing and ramming the seat to proper size and slope, pitching etc. with local carriage of boulders from a distance of 60 M with lift upto 3 M, complete as directed.
546Item No. 3 : Construction of 1.50 M x 1.00 M rectangular boulder sausage including supplying of materials with 25 cm to 30 cm size boulders collecting from a lead of 25 KM encased in 15 cm mesh of 8G hexagonal wire netting and filling the voids between the boulders with stone not exceeding 18 cm in size tied with 8G galvanized tying wire at 30 cm apart, laid in position as directed including necessary local carriage of materials, paying necessary forest royalty including providing 1 (one) no. of jati bamboo horizontal runner along the top of the sausage with vertical bhaluka bamboo post 1.20 M apart driven at least 0.60 M below ground and tying with sausage etc, all complete as directed.
547Item no 4: Earthwork in cutting in river bank etc. to the design section and grade and removing the spoils to a safe distance including cutting, uprooting and removing trees upto 15 cm dia, uprooting and removing roots and stumps etc, including excavating the earth boulder sausages of 1.00 M dia, 50 cm under river bed shape, size and grade etc. with all lead and lift, complete as directed.
548Item No. 5: Plain CC work in 40% plum hard blasted boulder of 15 cm to 23 cm size and filled interstices with 60% cement concrete in proportion 1:3:6 with 13 mm to 38 mm size river shingles including curing, shuttering etc, complete as directed. (Cost of shuttering will be paid separately).
549Item No. 6: Labour charge for loose dumping boulder of 23 cm. to 30 cm. size in loose in eroded portion of river bank/ bed including handling charge and including site carriage of boulder from stack yard/ dump site within a distance of 150 m etc. complete as directed. Without Boat
550Mechanical Works comprising Floating Pumping Arrangement, Pumping Machinery, Primary Filtration System and Surge Protection System
551Supply, fabrication, launching & commissioning of M.S. Floating Barge of size: 4.57 m x 3.81 m x 1.37 m at site made up of best quality M.S. Plates of 6 mm thick, M.S. Angles ISA6565 and MS Black pipe of 40 mm dia. having relevant IS specification complete as directed and as per drawing. The Bottom Plate, Side Plate and Deck Plate of the Barge is to be fabricated by M.S. Plate of thickness 6 mm. The bottom stiffener, hull stiffener, deck post, shed post, tie in the middle of the entire water cut portion of the barge is to be made up of M.S. Angles of size: 65 mm x 65 mm x 6 mm. The Deck Frame, Deck Post, Tie (Lateral) is to be made up of M.S Angle of size: 65 mm x 65 mm x6 mm. The Principal Rafter, Suspender (Kingpost), Queen Post and Purlin of roof truss of the Barge is to be made of H.D. M.S Black Pipe of size: 40 mm nominal dia. of thickness, 4.05 mm. The railing of the Barge in two rows is to be provided by using M.S.Pipe of size 40 mm dia. & a ladder of length 1.5 metre for manhole is to be made using M.S.Pipe of size 25 mm dia. M.S.Ballard as well as Manhole is to be provided as directed & as per drawing. ISI approved Roofing sheet & Ridging with high grade aluminium zinc colour coated (PPGL) of thickness 0.5 mm as per IS:19565(2012) is to be used. Painting:The job also includes painting of all the metallic surfaces of Barge (both inside & outside) by applying anticorrosive Metal Primer to be followed by 2 (two) coats of synthetic enamel metallic paints. The dust, dirt, oil or any other foreign materials should be removed from the surfaces to be painted before applying the paints. Each subsequent coat of paint should be applied after normal air drying of previous coat.All the joints should be perfectly leak proof with continuous arc welding maintaining the proper beads using M.S. Electrode of relevant IS gauge & specification. No cracks or holes should be found in the welding beads. The beads should have uniform waves, width and height. The finished product should satisfy the designed dimensions and have almost no distortion. Approximate weight of the Barge:5.50 MT (Approx.)Note : 1. Any fencing of wire mesh (if required) to be measured as extra. extra. 2. All anchoring arrangements to be measured as extra. 3. Rain protection shed (if required) to be measured as 4. Ladder for boarding from bank to Barge to be measured as extra
552ELECTRIC MOTOR DRIVEN CENTRIFUGAL PUMPSET :- Supply and Installation of 75 H.P. (55 kW) Horizontal Axially Split, Two-Stage Split Casing Centrifugal Pump Set, Kirloskar Make/Brand, Model No. DSM 125/40/2, conforming to relevant IS/ISO Specifications, having 200 m³/hr (approximately 55.56 LPS) minimum discharge at 60.00 metre Differential Head, operating at a rated speed of approximately 1480 RPM at 50 Hz, with pump efficiency of approximately 72.54% at the specified duty point, rated pump power of approximately 44.99 kW and NPSH Required of 3.63 metre, with 150 mm suction and 125 mm delivery nozzles, complete with two-stage axially split casing construction (BB1 type) and enclosed impellers. The pump shall be of CI casing, CF8M impeller and SS 410 shaft, or equivalent materials as specified by the manufacturer, complete with shaft sleeves/wear components, bearings, bearing housings, gland packing/ sealing arrangement, liquid deflectors, bearing covers, keys, nuts, bolts and all other standard components required for satisfactory operation. The pump shall conform to the manufacturer's certified performance data and shall be performance tested in accordance with ISO 9906 / ANSI-HI 14.6 Grade 2B or relevant applicable standard.The pump shall be coupled to a 3-phase, 4-pole, 55 kW (75 H.P.), 415 V, 50 Hz Squirrel Cage Induction Motor, Kirloskar Make/Brand, suitable for continuous operation and conforming to relevant IS Specifications, complete with all standard accessories, terminal arrangement, bearings and mounting arrangements, suitably selected for the specified pump duty. The complete pump-motor assembly shall be mounted on a heavy-duty fabricated MS base frame, complete with flexible coupling, coupling guard, foundation bolts, nuts, washers, shims/packing plates and all necessary hardware, properly aligned and balanced.Starter for Squirrel Cage Induction Motor: Supply and installation of 3-Phase, 415 V, 50 Hz FASD Starter in sheet steel enclosure type, having necessary protection against under-voltage and overload, suitable for operating 75 H.P. Squirrel Cage Induction Motor, conforming to IS: 1822–1967, complete with necessary contactors, overload relay, under-voltage protection, control circuit, indicating lamps, push buttons, fuses/MCBs, terminals and all other standard accessories required for safe and satisfactory operation of the motor. Make: BCH / L&T / Schneider / MEI / Siemens / Havells & Equivalent. The starter shall be suitably rated for the motor and complete with all necessary internal wiring, interconnections, mounting arrangements and accessories.The job shall include supply, fitting and fixing of all necessary pump and motor accessories, including coupling, coupling guard, base frame, foundation bolts and nuts, gland packing, keys, fasteners and other manufacturer's standard accessories, complete in all respects. The complete pump set shall be transported to site and installed at the designated Barge/Pump House, as applicable, in proper position with accurate horizontal and vertical alignment, including necessary shifting, lifting, handling, levelling, fixing, welding and/or foundation bolting, as applicable, and checking of pump-motor shaft/coupling alignment after installation. Any civil works required for foundation, grouting, structural modification or construction shall be measured separately.The work shall also include testing and commissioning of the complete pump set at site under full-load operating condition, including checking of discharge, head, motor current, voltage, direction of rotation, power consumption, vibration, bearing temperature, leakage, gland/sealing condition, coupling alignment and satisfactory operation of the complete assembly. The contractor shall submit the manufacturer's certified pump performance curve, technical datasheet, general arrangement drawing, pump sectional drawing, motor datasheet, material/MOC details, factory test/performance certificate and commissioning report as applicable. Necessary power cable, electrical wiring and external electrical connections from the power source to the starter shall be measured separately, unless specifically included elsewhere in the BOQ. The rate shall be inclusive of all materials, labour, transportation, loading, unloading, shifting, erection, installation, alignment, tools, tackles, testing and commissioning required for completion of the work in all respects as directed by the Engineer-in-Charge.
553Fabricated heavy duty G.I. Pipe confirming to IS 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole as per B.S.S.-10 Part-I, table-D, of size -150mm dia x 3.00 Mtr. long
554Fabricated heavy duty G.I. Bend confirming to IS– 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole as per B.S.S.-10 Part-I, table-D, of size:-150mm dia x 90º
555150mm dia x 45º
556150mm dia x 22½º
557Fitting, fixing and laying of G.I. Pipes with Accessories: Laying, fitting, fixing and connection of suction pipe line for each pump set with 150mm dia. G.I. pipes of different length, fabricated G.I. pipes with different length, fabricated bends, tapper including foot valve for suction side. Reflex valve, sluice valve for delivery side of each pump set with 125mm dia. G.I. pipes with different length, bends, fabricated G.I. pipes with different length as per drawing. The joints should be with the best quality pipe joining sets of required size comprises of 60mm thick black moulded rubber gasket, necessary nuts, bolts and washer. Every joint should be leak proof and should be completed in all respect from foot valve to the pump flange for suction side and from delivery flange is the water flow through at proper F.S.L for the delivery side. The pipes lines with accessories must be proper painting.
558CI Foot Valve: Heavy Duty CI Foot Valve, Flange type, the holes of the flange should be drilled as per BSS No. 10, Part-1, Table-D. The materials of construction and all components of the Foot Valve should strictly conform to IS : 10805 - 1986 and having marked with manufacturer’s name and trade mark. 150mm dia
559CIDF sluice valve: Heavy Duty CIDF sluice valve, inside screw, non raising, vertical spindle type with hand wheel operation, need for water purpose. The rotation of closing should be counter clock wise. The holes of the flange should be drilled as per BSS No.10, Part-I, Table-D. All materials, construction and components should strictly conform to IS : 14846 - 2000 and having marked with manufacturer’s name and trade mark Make: Kirloskar / Upadyaya / Zolato / Venus & Equivalent. 150mm dia
560CIDF Reflex Valve: Heavy Duty CIDF Reflex Valve, swing check type, with by pass arrangement, horizontal operating. The holes of the flange to be as per BSS NO.-10, Part-I, Table D and the material, construction and all components should strictly conform to IS : 5312 (Part – I) - 2004 and having marked with manufacturer’s name and trade mark. 150mm dia
561Flexible rubber hose pipe as per construction schedule with required nos of wire reinforcement inside at different layers, without / with MS built in type flange coupling on both ends having drilled as per BSS No. 10, Part – I, Table – D. The hose pipes should be capable of withstanding a pressure equal to 1.5 times the designed working pressure without failure as per IS : 443 - 1975 and also withstand vacuum drawn upto 625 mm of mercury (approx.).The schedule of construction of the hose pipe should conform to IS : 3549 – 1983. B. With MS built in type flange - 150 mm nominal dia X 7.50Mtr in length
562PRIMING SYSTEM : SUPPLY AND INSTALLATION OF 1 HP MONO BLOC PUMPSET AND ALL ACCESSORIES INCLUSIVE Supply of 1HP Mono bloc Pump Set for Priming System including fitting, fixing and installation on Barge.
563Air Valve: CIDF Air Valve conforming to IS : 14845 suitable for following diameter pipes 200mm dia
564Gland Packing (12 mm to 25 mm dia) asbestos rope (B Q)
565W.B. Grease (Best quality).
566Surge Protection System.Design, Supply, Erection and Commissioning of Surge Protection System.
567Primary Filtration SystemDesign,Supply,Erection and Commissioning of Self Cleaning Primary Filtration System of 200 Micron at Intake or Suitable Pumping Station.
568Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
569Construction of RCC Footing for GI Pipe Support from the Intake to Barge including Earthwork in excavation, Soling of the Excavated Trenches for construction of footing, PCC, Centering and Shuttering, Supply, fitting and fixing of Rebar, RCC Works and embedding of the Structural member (ISMB Sections) in the footing all complete as directed at site ( Structural steel work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete is to be paid separately)
570Electrical Works comprising HT Line, Substation and Associated Electrical Installations
571Surveying and finalising the suitable tapping point in existing nearby 11 kV line in consultation with APDCL and Departmental Officers, marking the alignment of the line considering Right of Way, Feasibility etc. as required and as directedFor first 500Mtrs.
572For every subsequent 100 M beyond 500 M Length
573Jungle cutting including cutting of branches of trees and reclining Bamboos along the alignment of the overhead line providing clearance 1.5M either side and above the line as directed. Clearance must be ensured at the time of charging the line
574Supplying & Erection of PSC Pole conforming to IS 1678 of Standard Dimension and of following lengths for overhead Electric Lines including digging of Earth Pit (0.75m × 0.5m) to a depth ⅕th of the Pole Length with a PCC Base Plate of size 60 cm × 60 cm × 12 cm at the bottom, refilling as specified with hard ramming as directed (B) POLE LENGTH 9.75 Metres (i) Refilling with Hard Soil (a) for 6 or more poles
575Supplying and erection of GI Channel Cross Arm of following sizes for 11 kV Line on PSC/ Steel Poles along with GI Clamps, GI Nuts & Bolts including drilling of necessary holes as directed100 mm X 50 mm X 6 mm X 3200 mm
576Supplying and erection of GI T Cross Arm for 11 kV Line on PSC Poles along with Clamps, Nuts & Bolts including drilling of necessary holes as directed
577Supplying and erection of Cross Bracing Sets for 11 kV Line on DP (Double Pole) Structure comprising of 2(two) Nos. of G I Angle of size 50 mm × 50 mm × 6 mm × 2200 mm fitted horizontally and other 2 Nos. 3200 mm long fitted diagonally along with G I Pole Clamps, Nuts Bolts and washer duly painted with Anti Corrosive Primer and Aluminium Paint including drilling of necessary holes as directed
578Supplying and Erection of 11 kV HT Stay Set comprising of Stay Rod, Anchor Plate, Thimble etc. in 1:3:6 CC foundation including supply and erection of 7/10 SWG G I Stay Wire and Guy Insulator complete including excavation, refilling with hard soil and hard ramming as directed
579Supply and erection of G I Stay Wire 7/10 SWG along with 11 kV Guy insulator, binding to existing 11kV Stay Set and the GI Pole Clamp, tightening to required extent as directed.
580Supplying and Erection of 11 kV Polymeric Pin Insulator 5 kN on T Cross Arm/ Channel along with GI Pin, GI Nuts & Bolts including Drilling of Holes as directed
581Supplying and Erection of Hardware Fittings (3u bolt) on existing MS / GI Channel Cross Arm with GI Nuts and Bolts for mounting 11 kV Disc Insulator 45 kN as directed
582Supplying and Erection of 11 kV Polymeric Disc Insulator 45 kN on existing Hardware Fitting on Cross Arm as directed
583AAA Raccoon Conductor - 7/3.81 mm
584Supplying, Fitting and Erection of 3-φ 11 kV Gang Operated (G.O.) Air Break Switch having nominal System Voltage of 12 kV, rated Voltage 11 kV, rated Frequency 60 Hz, and peak current in closed position 46 kA, conforming to IS 2544, IS 5340(Part-III) and IS 9921(Part I to V) suitable to opearate in all climatic condition of following current ratings on existing Channels complete with Operating Pipe and Handle including making of necessary Electrical Connections as directed. 400 Amps
585Supplying and Erection of 3-φ 11kV Drop Out (D.O.) Fuse Unit rated voltage 11 kV R.M.S. To 12 kV R.M.S., highest System Voltage 12 kV, each pole consisting of Polymericinsulator, all current carrying parts made of a highly conductive copper alloy and contact portion are silver plated for corrosion resistance and efficient current flow and the fuse tube made of fibre glass coated with ultraviolet inhibitr on the outer surface and having Arc Quenching bone fibre liner inside conforming to IS 9385/1983 of following current ratings on existing Channels complete with Barrel Fuse and making of necessary Electrical Connections as directed. (400 Amps)
586Supplying and Erection of Metal Oxide gapless Lightning Arrestor of following specification on MS Channel with Clamps, Nuts & Bolts including drilling of holes and making of necessary connection with Line Conductors as directed. 9 kV, 10 kA with Polymeric body
587Supply & Erection of C.I. Earth Pipe 100 mm dia × 2.5 Metre long perpendicular to the ground including digging of Earth Pit, putting Salt and Charcoal in alternate layers surrounding the pipe along with fitting of hinged CI top Cover Plate and necessary C.C. work as directed
588Supply including Erection of 5 Star ON-AN (Oil Natural, air Natural) Cooled Al/ CU-wound Distribution Transformer conforming to IS specifications 2026 (with estamendments) withallstandard accessories erected on double pole structure/ transformer pad including transportation and handling, loading and unloading etc,, securing it on existing Channel firmly with necessary clamps, nuts & bolts .as required, andmaking necessary connections on HV and LV sides as directed (Cost of DP structure /Pad extra ) Capacity : 250 kVA, 11 kV/0.433 kV (Dyn) (as per CEA Guideline), Al-wound with OLTC
589Erection & Commissioning of H T metering unit comprising of 11 kV/110V, 3-Ph CT/PT etc., Meter Cabinet, Electronic HT Energy Meter, making connection through Control Copper Cable to be laid through 20 mm dia G.I. Pipe complete including making necessary payment for Meter Security, cost of CT/PT Set etc. to APDCL as required and as directed
590Supply & Erection of Anti Climbing Barbed Wire on Poles at a height of about 3 Metres and covering a length of 1.5 Metre as directed
591Supplying including erection of powder coated LT Feeder Panel /Metering Panel for 500 kVA DTR of size (800mm × 1200mm × 400mm) made of 16 SWG CR sheet and 40mm × 40mm × 6mm MS angle having CR sheet roofing containing Cu Busbar and 1 no 500 A FP MCCB, (50kA) making necessary connection through copper cable complete as directed..
592Supply and Laying of Single Core PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support including End Termination with Brass Compression Gland and Cable Lug as required and as directed Size of Cable : 400 Sq mm × 1 core(4 line)
593Supply and Laying of 3½(Three and half) Core PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support including End Termination with Brass Compression Gland and Cable Lug as required and as directed Size of Cable : 400 mm2 × 3.5 Core ( Single Line)
594Supply and Laying of 3½(Three and half) Core PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support including End Termination with Brass Compression Gland and Cable Lug as required and as directed Size of Cable : 300 mm2 × 3.5 Core ( Single Line)
595Supply and Laying of 3(Three) Core PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support including End Termination withBrass Compression Gland and Cable Lug as required and as directedSize of Cable : 70 mm2 × 3 Core ( Single Line)
596Testing and commissioning of the 11kV line including making payment for necessary Inspection Fee and obtaining charging approval from competent authority (Electrical Inspectorate) as directed a) upto 1 kM
597Danger plate suitable for 11KV line conforming to IS:2552/1963 of size 200mmX200mm
598Providing Security fencing around the S/S with GI chain link net, woven with 10 SWG wire with mesh 7.5cm × 7.5cm to be erected on GI angle 40 mm × 40mm × 5mm, with necessary C C grouting, with a fencing height of 1.8 mtr, having a hinged door, fabricated with flat GI strip boundary and cross bracing, complete including supply of all materials, excavation refilling etc as reqd and as directed.
599Testing and commissioning of the Substation alongwith obtaining necessary approval for charging from competent authority including payment of Inspection Fee, Arranging for Test Report etc. as required and as directed for following kVA Capacity.Capacity :250/315 kVA, 11 kV/0.433 kV
600LiaisoningwithAPDCL,ForestDepartment,Electrical Inspectorate etc. right from start till Commissioning of the HT Line/Substation, Preparation of all necessary documents like Agreement and Affidavit required for new Power Connection, obtaining No Objection Certificate from Forest Department where necessary complete all arrangement for charging the Installation as required and as directed.
601Erection & Commissioning LT Whole Current Electronic Energy Meter includingmaking necessary payment to APDCL for Meter Cabinet, Meter Security etc as reqd and as directed.
602Load Security to be paid to APDCL (Approx.)
603Main LT Control Panel Board for 75 HP Pumpsets: Supplying, installation, testing & commissioning of indoor type floor mounted, cubicle type compartmental, dust and vermin proof (as per IP-54) main LT Control Panel Board of following capacity and size, made out of 16 SWG CR Sheet and 40mmх40mmх6mm angle having four nos. of legs 400 mm long at the bottom, with folded and welded construction having dismantling doors at the back, surface chemically treated and Siemen's grey powder coated, containing Al. strip busbar having minimum current density of 1.2 Amp/mm2 R-Y-B-N colour coded with heat shrinkable insulating sleeves containing all incoming and outgoing electrical accessories as specified, neatly installed and internally wired with best quality multi-strand, PVC insulated Single core unsheathed, HRFR copper wire (switch gears above 100Amp rating to be connected to busbar through Aluminium strip of suitable size) having cable incoming & outgoing provision at the bottom through gland plates complete including excavation of trench and necessary C C Work as directedMain LT Panel Board Suitable for operation of 4 х 75 HP Pumpset Size :2000 mm(B)х 1500 mm(H)х 400 mm(D)Electrical accessories :-FP, 415 V 630 Amp MCCB with Short Circuit & Overload Protection, Breaking Capacity 50 kA as main incomer - 1 NoTP, 250A, 415V , AC Motor Control Switch(SDF) with 250A HRC Fuse - 4 NosAir Break Contactor, TP 100 A, 415 V, AC for Capacitor Duty - 4 NosTP, 415V 100 Amp, MCB for Power Capacitor- 4 NosM.I. Voltmeter, 0-500V, 1% accuracy 96mm х 96mm size- 1 NoVoltmeter Selector Switch, 4 position, 10/15 Amp- 1 NoM.I. Ammeter, CT operated, 1% accuracy 96mm х 96mm size - b) 0 - 600 Amps for Incoming Side - 1 Nob) 0 - 200 Amps for Outgoing Motor Feeder- 4 NosAmmeter Selector Switch, 4 position, 10/15 Amp- 5 NosAnalog Power Factor Meter, 96mm х 96mm size 1% accuracy - 1 NoCurrent Transformers for metering purpose Accuracy Class Ia) CT, 600/5 for incoming side - 6 Nosb) CT, 200/5 for outgoing side - 12 NosLED Type Pilot Indicating Lamp, 25 mm - 3 NosSP, 250V, 1A, MCB with breaking capacity 10kA for meter protection - 3 NosDP, 250V, 16A, MCB with breaking capacity 10kA for lighting purpose - 1 SetAluminium Busbar, 50 mm × 10 mm - 1 SetOn and Off Push Button Switch - 4 Sets
604Sub LT Panel with MPCB for 75 HP Pumpsets: Supplying, installation, testing & commissioning of indoor type floor mounted, cubical type compartmental, dust and vermin proof (as per IP-54) LT Motor Control Sub Panel Board of 75 HP capacity and given size, made out of 16 SWG CR Sheet and 40mmх40mmх6mm angle having four nos. of legs of 400 mm length at the bottom, with folded and welded construction having dismantling doors at the back, surface chemically treated and Siemen's grey powder coated, containing Motor Protection Circuit Breaker (MPCB) and Ammeters and Voltmeters as specified, neatly installed and internally wired with best quality multi-strand, PVC insulated Single core unsheathed, HRFR copper wire having cable incoming & outgoing provision at the bottom through gland plates complete including fixing on the barge with nuts and bolts as directed.Sub LT Panel Board with MPCB Suitable for operation of 4 х 75 HP Pumpset Size :1600 mm(B)х 1400 mm(H)х 400 mm(D)
605Electrical ComponentsMotor Protection Circuit Breaker (MPCB) with adjustable Thermal and Magnetic Setting Three Pole (TP) 415 V AC 50 Hz with Rotary Handle for 75 HP Motor - 4 NosM.I. Voltmeter, 0-500V, 1% accuracy 96mm х 96mm size - 1 NoVoltmeter Selector Switch, 4 position, 10/15 Amp- 1 NoM.I. Ammeter 0 - 200 Amp, CT operated, 1% accuracy 96mm х 96mm size - 4 NosAmmeter Selector Switch, 4 position, 10/15 Amp - 4 NosDP, 250V, 16A, MCB with breaking capacity 10kA for lighting purpose - 1 NoCurrent Transformers for metering purpose with CT ratio 200/5 - 12 NosLED type Pilot Indicating Lamp 25 mm - 12 NosSP, 250V, 1A, MCB with breaking capacity 10kA for meter protection - 3 NosTerminal Strip four connections - 1 NoInternel Electrification including all materials Labourer etc.
606External IlluminationSupplying & Erection of Swaged Type Steel Tubular Pole of following lengths and specifications for overhead Electric Lines with necessary Base Plate and Top Cap including digging of Earth Pit to a depth ⅕th of the Pole Length, refilling and necessary CC work (45cm x 45 cm) in 1:3:6 proportion from bottom upto 45 cm above the Ground Level with hard ramming including painting of the pole as directed (for lighting purpose)a) 8 m long
607Supply & erection of Street light luminaries with 2x36w CFL Lamp, Bajaj Make on existing pole bracket alongwith supply fitting fixing of necessary pole box and making connection from pole box to the lamp with 2.5mm sq single core unsheathed PVC insulated Copper cable 1100volt Grade including supply of Cable as required and as directed
608Laying of PVC/XLPEe insulated Armourd LT Power Cable 1.1Kv Grade with Al Conductor Direct in ground including digging of trench of 0.75 m deep including Sand Cushing and refilling alongwith brick protection every 20cm apart as directed. Size of Cable 6mmsq x 2 core . Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58472213
AUTHORITY Government Departments
TENDER VALUE 34.91 Crore
LAST DATE 03-12-2026
Authority
Authority Name Irrigation Department
Work Description Tender for Construction Of Bankal-Path Fis, Lis From River Diyung At Diyungbra Area And Dismaihadi Irrigation Scheme Under Sopd-G For The Year 2026-27 Under West Dima Hasao Divisin (I) (Pkg-2)
Basic Detail
Tender No 04 (SOPD-G) 2026-27 Date_ 02_11_2026
Bidding Type Tender
Location
City Dima Hasao
State Assam
Key Dates
Publish Date 10 Nov 2026
Submission Date 03 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 34.91 Crore
Tender Fee 20000
EMD 69.82 Lakhs
Exemption Available
Document List
b817d9eb-1151-462b-850c-c025dda93f40.html
Bid2.pdf
BOQ_85997.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

b817d9eb-1151-462b-850c-c025dda93f40.html

pdf

Bid2.pdf

xls

BOQ_85997.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender