Tender For Construction Of New 400/132Kv Umrangshu Grid Substation Along With Associated Transmission System At Dima Hasao District, Assam.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Nov 2026
16 days left
EMD
11.20 Crore
Bank guarantee accepted
Document Fee
30000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dima Hasao → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New 400/132Kv Umrangshu Grid Substation Along With Associated Transmission System At Dima Hasao District, Assam.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Nov-2026 | Corrigendum-IV | Other | 30-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Grand Summery |
| 2 | PRICE SCHEDULE-1 (Supply) 400kV New Substation |
| 3 | PRICE SCHEDULE-2 (Freight & Insurance (F&I)) 400kV New Substation |
| 4 | PRICE SCHEDULE-3 (Erection, Testing & Commissioning (ETC) including civil works) 400kV New Substation |
| 5 | PRICE SCHEDULE-4 Civil Works 400kV New Substation |
| 6 | PRICE SCHEDULE-5 (Supply) 132kV Old Substation (Remote End) |
| 7 | PRICE SCHEDULE-6 (Freight & Insurance (F&I)) 132kV Old Substation (Remote End) |
| 8 | PRICE SCHEDULE-7 (Erection, Testing & Commissioning (ETC) including Civil Works) 132kV Old Substation (Remote End) |
| 9 | PRICE SCHEDULE-8 Civil Works 132kV Old Substation (Remote End) |
| 10 | PRICE SCHEDULE-9 (Supply) 400kV Misa-Silchar D/C LILO at Umrangshu (Quad Moose) |
| 11 | PRICE SCHEDULE-10 (Freight & Insurance (F&I)) 400kV Misa-Silchar D/C LILO at Umrangshu (Quad Moose) |
| 12 | PRICE SCHEDULE-11 (Erection, Testing & Commissioning (ETC) including Civil Works) 400kV Misa-Silchar D/C LILO at Umrangshu (Quad Moose) |
| 13 | PRICE SCHEDULE-12 (Supply) 132kV Umrangshu(New)-Umrangshu(Old) D/C (Single Panther) |
| 14 | PRICE SCHEDULE-13 (Freight & Insurance (F&I)) 132kV Umrangshu(New)-Umrangshu(Old) D/C (Single Panther) |
| 15 | PRICE SCHEDULE-14 (Erection, Testing & Commissioning (ETC) including Civil Works) 132kV Umrangshu(New)-Umrangshu(Old) D/C (Single Panther) |
| 16 | Supply of Isolators, with both manual and motor driven operating mechanisms along with Support Insulators, clamps & connectors as required and as per spefication |
| 17 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 18 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 19 | 145KV, 3150A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 20 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Tandem Isolator |
| 21 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch. |
| 22 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch. |
| 23 | Supply of Isolator mounting structures, foundation bolts, nuts bolts etc. as required. and as per spefication |
| 24 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 25 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 26 | 145KV, 3150A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 27 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Tandem Isolator |
| 28 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch. |
| 29 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch. |
| 30 | Supply of insulator string assembly with antifog insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required. and as per spefication |
| 31 | 400kV, 4X160kN Quad tension string suitable for Quad Moose conductor. |
| 32 | 400kV, 2X160kN Double tension string suitable for Single Moose conductor. |
| 33 | 400kV, 2X120kN Double suspension string suitable for Quad Moose conductor. |
| 34 | 132kV, 2x90kN double tension string suitable for Single AAAC Panther conductor. |
| 35 | 132kV, 2x120kN double suspension string suitable for Twin MOOSE conductor. |
| 36 | 132kV, 2x160kN double tension string suitable for Twin MOOSE conductor. |
| 37 | 132kV, 2X120kN Double suspension string suitable for Quad Moose conductor. |
| 38 | 132kV, 4X160kN Quad tension string suitable for Quad Moose conductor. |
| 39 | Supply of Conductors, Clamp Connectors as required and as per spefication |
| 40 | 4'' IPS Aluminium Tubular Conductors (Schedule 40) with flexi connectors, expansion joints, T- joints, end caps etc as required. |
| 41 | ACSR Moose Conductor as per site requirement |
| 42 | Clamps & Connectors as per requirement |
| 43 | Supply of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required and as per specification |
| 44 | 420KV, BPI |
| 45 | 145KV, BPI |
| 46 | 72.5KV, BPI |
| 47 | Supply of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required. and as per specification |
| 48 | 420KV, BPI |
| 49 | 145KV, BPI |
| 50 | 72.5KV, BPI |
| 51 | Supply of Station Service Transformer (Energy efficiency level-3) and accessories as per specification. |
| 52 | 630 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors. |
| 53 | 440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 630KVA Station Service Transformer |
| 54 | Supply of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required and as per specification |
| 55 | 398kV, 20kA, LA |
| 56 | 120kV, 10kA, LA |
| 57 | 60kV, 10kA, LA |
| 58 | Supply of Surge Arrester support structures, foundation bolts, nuts bolts etc as required and as per specification. |
| 59 | 398kV, 20kA, LA |
| 60 | 120kV, 10kA, LA |
| 61 | 60kV, 10kA, LA |
| 62 | Supply of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required and as per specification. |
| 63 | 400kV, 8800pF, 3 Wdg CVT. |
| 64 | 132kV, 4400pF, 3 Wdg CVT. |
| 65 | 400KV, 3150A Wave Trap |
| 66 | 132KV, 800A Wave Trap. |
| 67 | Supply of CVT pipe/Lattice support structure, foundation bolts, nuts bolts etc as required and as per specification. |
| 68 | 400kV, 8800pF, 3 Wdg CVT. |
| 69 | 132kV, 4400pF, 3 Wdg CVT. |
| 70 | Supply of outdoor AIS Circuit Breaker along with clamps & connectors, support structures, foundation bolts and all other accessories as required and as per specification. |
| 71 | 145kV, 3150A, 40kA for 3 sec. |
| 72 | 72.5kV, 1250A, 40kA for 3 sec. |
| 73 | Supply of Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required and as per specification |
| 74 | 400kV BMK |
| 75 | 132kV BMK |
| 76 | Supply of CT & PT alongwith junction box, clamps & connectors and other accessories as required and as per specification |
| 77 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 78 | 132kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 315MVA trafo bay |
| 79 | 132kV, 3000-1600/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for Bus coupler bay |
| 80 | 72.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for transformer tertiary bay |
| 81 | 132kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 82 | 72.5kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 83 | Supply of CT/PT support structures, foundation bolts, nuts bolts etc as required and as per specification. |
| 84 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 85 | 132kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 315MVA trafo bay |
| 86 | 132kV, 3000-1600/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for Bus coupler bay |
| 87 | 72.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for transformer tertiary bay |
| 88 | 132kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 89 | 72.5kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 90 | Supply of Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required for 400kV GIS |
| 91 | 400kV Bus Bar Protection Panel |
| 92 | 400kV Line CRP |
| 93 | 400/132kV ICT CRP (315MVA) |
| 94 | 400kV Bus Reactor CRP |
| 95 | 400kV Tie Breaker CRP |
| 96 | Supply of Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required for 132kV AIS |
| 97 | 132kV Line CRP (with line differential) |
| 98 | 400/132kV Transformer CRP (315MVA) |
| 99 | 132kV Bus Coupler CRP |
| 100 | 132kV Bus Bar CRP |
| 101 | Supply of Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required for 72.5kV AIS |
| 102 | Station Service Transformer control & Protection Panel |
| 103 | Relevant software for relay configuration & setting, maintenance etc. |
| 104 | Supply of Phasor Measurement Unit as required and as per specification. |
| 105 | Phasor Measurement Unit |
| 106 | Supply of Complete Substation System Automation System (As per specification) |
| 107 | Station HMI (Main, Redundant and Metering) with Industrial PC |
| 108 | Maintenance HMI (DR Workstation) with Industrial PC |
| 109 | Gate way with PLCC and Fibre Optic Modem and Panel |
| 110 | SAS Inverter (5kVA) |
| 111 | Colour Laser MFM Printer |
| 112 | GPS Clock System |
| 113 | 16 port Ethernet Switch |
| 114 | All interphase equipment for Gateway to SLDC |
| 115 | VDU 75 inch |
| 116 | Aux BCU with panel as per scheme requirement |
| 117 | All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords,furnitures for HMIs and printers, cables etc as per requirement |
| 118 | Station Ethernet Switch |
| 119 | SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification. |
| 120 | Red Box |
| 121 | Integration of the PMU and the Meters with the PDC, CDCS |
| 122 | Supply of 400 kV GIS Equipment as per specification. |
| 123 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification |
| 124 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Transformer bay Module with CSD as per technical specifcation |
| 125 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module without CSD as per technical specification. |
| 126 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification. |
| 127 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus Reactor bay Module with CSD as per technical specification |
| 128 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement. |
| 129 | 400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines. |
| 130 | 400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS) |
| 131 | 10 Ton EOT Crane for 400kV GIS Building |
| 132 | Scissor Lift |
| 133 | Supply of Testing And Maintenance Equipment of GIS as specified. |
| 134 | SF6 Gas Processing, Drying, Storage & Filling Unit |
| 135 | SF6 gas quality testing unit |
| 136 | SF6 Gas Leak Detector |
| 137 | SF6 gas Mask |
| 138 | Supply of 315MVA, 400/132/33kV, ONAN/ ONAF/ODAF or ONAN/ONAF1/ONAF2, ICT along with all accessories and below: (including terminal connectors and other acessories as per technical specification) |
| 139 | 315 MVA, 400/132/33 kV, Three phase Transformer with OLTC & Oil |
| 140 | Oil & winding temperature monitoring system (FO based) |
| 141 | Online DGA (Multi gas) |
| 142 | Online insulating drying system |
| 143 | Maintenance free breather |
| 144 | RTCC Panel with AVR (TMS) |
| 145 | 10% Extra OIL for each transformer |
| 146 | Rail track for transformer |
| 147 | Pulling block for transformer |
| 148 | Supply of 80 MVAR Bus Reactor (with Oil) as per specification. |
| 149 | 80 MVAR, 420KV, 3 Phase, Star with Neutral brought out, ONAN coreless Bus Reactor along with Marshalling Kiosk with accessories etc as per technical specification with 10% spare oil |
| 150 | Pulling block for reactor |
| 151 | Supply of Battery & Battery Chargers, DCDB & ACDB as per specification |
| 152 | 220V VRLA Battery 1600AH |
| 153 | 220V, Dual Float Cum Boost Chargers for 220V Battery 350A |
| 154 | 220V, DCDB |
| 155 | 48V VRLA type Battery Bank 600AH |
| 156 | 48V, Dual Float cum Boost Chargers for 48V Battery 130A |
| 157 | 48V, DCDB |
| 158 | Main ACDB |
| 159 | Sub ACDB |
| 160 | MLDB with 415V/415V, 100kVA isolation transformer |
| 161 | ELDB with 415V/415V, 50kVA isolation transformer |
| 162 | HVAC DB |
| 163 | MCBDB |
| 164 | Aux ACDBs, Sub DCDBs etc, as per requirement |
| 165 | Supply of Power Line Carrier Communication Equipments as per specification |
| 166 | HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT) |
| 167 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 200 km) for 400kV |
| 168 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km ) for 132kV |
| 169 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 200 km(400kV) |
| 170 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 50 km(132kV) |
| 171 | LMU and LMDU |
| 172 | EPAX system and telephone system with redundant power supply card and CPU along with E1 interface card. |
| 173 | CAT 6 armoured cable. |
| 174 | 2 wire telephone set |
| 175 | Audio Cable |
| 176 | Supply of OPGW equipments as per specification as per specificationTransmission Equipment & SDH Equipment -STM16(ADM- up to five Direction) |
| 177 | Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding Sl. No. 28 & 29 below.) |
| 178 | Supply of OPGW equipments as per specification as per specificationOptical Interface/SFP for: |
| 179 | SFP to support STM-4 upto 150km. |
| 180 | SFP to support STM-16 upto 150km. |
| 181 | Supply of OPGW equipments as per specification as per specificationTributary Cards |
| 182 | E1 interface card (Minimum 63 interfaces per card) |
| 183 | Ethernet interfaces with minimum of 10/100/1000Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card) |
| 184 | 8 Port VOIP for remote locations |
| 185 | Analog Telephone( 2-wire telephone for VOIP Gateway location) |
| 186 | IEEE C37.94 (4 interfaces) to E1 converter/interface for intergration with SDH equipment |
| 187 | Supply of OPGW equipments as per specification as per specificationEquipment Cabinets with power distribution Circuit breakers, Fan Cable Tray Cable glands entry from Top and bottom |
| 188 | For SDH equipment(including DDF patching facilities and other accessories |
| 189 | Main Distribution Frame(100 pairs) |
| 190 | Supply of OPGW equipments as per specification as per specificationCraft Terminal |
| 191 | Hardware (LAPTOP) |
| 192 | Software |
| 193 | Pre connectorized optical patch cords(Minium 8 patch cords per station) |
| 194 | Firewall with deep inspection for IEC 104, IEC 61850 ,IEC 62443 certified with 5 years warranty |
| 195 | Time synchronisation clock (MTCTE certified with multiband receiver) with all other accessories, cables etc. |
| 196 | Supply of XLPE Armoured, LT Power Cable (1.1kV grade) as per specification |
| 197 | 2C, 6sqmm Cu |
| 198 | 4C, 16sqmm Cu |
| 199 | 3.5C, 35sqmm Al |
| 200 | 1C, 150sqmm Cu |
| 201 | 3.5C, 70sqmm Al |
| 202 | 3.5C, 150sqmm Al |
| 203 | 3.5C, 400sqmm Al |
| 204 | Cable supports and other cable accessories |
| 205 | Others ( Cable for Fire Fighting, Illumination etc) |
| 206 | Supply of PVC Armoured Cu LT Control Cable (1.1 kV grade) as per specification |
| 207 | 4C, 2.5sqmm |
| 208 | 5C, 2.5sqmm |
| 209 | 7C, 2.5sqmm |
| 210 | 12C, 2.5sqmm |
| 211 | 17C, 2.5sqmm |
| 212 | 19C, 2.5sqmm |
| 213 | Cable supports and other cable accessories |
| 214 | Supply of Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc. |
| 215 | 40 mm Dia MS Rod for Main/Auxiliary Earthmat |
| 216 | Earthing Conductor: 40 Mm Dia MS Rod For Riser From The Burial Earth Mat To Equipment,Structure, Fence Etc) |
| 217 | Earthing Conductor: 75X 12 Mm GS (HDG) Flat For equipment and structure earthing |
| 218 | Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc) |
| 219 | Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover. |
| 220 | Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover. |
| 221 | Soil Resistivity Test And Soil Treatment As And When Required |
| 222 | Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat) |
| 223 | Separate Earthing For 400 kV GIS Building with earth electrodes & Copper earthing conductors etc. complete with all respects |
| 224 | Separate Earthing for all other switchyard buildings, fencing etc. with earth electrodes, GS earthing conductors etc. complete with all respects |
| 225 | Supply of Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc as required complete with foundation bolts, fastners etc. |
| 226 | 400kV Columns with peak |
| 227 | 400kV Beams |
| 228 | 132kV Columns with/without peak |
| 229 | 132kV Beams |
| 230 | Supply of Fire Alarm & Detection including all accessories as per specification |
| 231 | Fire Alarm & Detection system for 400kV GIS Buildings, Control Room , Panel Room, DB room, Battery Room including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc. |
| 232 | Portable and wheel/trolley mounted Fire Extinguishers for Control Room Building and Switchyard as per specification and Portable Fire Extinguisher for 400kV GIS Hall each (5kg X 6 Nos),Control room (2kg X 6 Nos), Security Barrack (2kg X 6Nos),Guard room (Security Booth) (2kg X 3Nos), Switchyard (5kg X 4Nos) ( as per specification. |
| 233 | Dry powder chemical type 10 kg. For 630 kVA transformer |
| 234 | Fire fire fighting system (sprinkler system) for control room as per requirement |
| 235 | Supply of HVAC & VENTILATION |
| 236 | 2 TON CAPACITY SPLIT AIR CONDITIONING UNITS for CRP/PLCC/DB Room with N+1 requirements |
| 237 | Ventilation system for 400kV GIS Building (Ventilation System with Centrifugal Fan and related Accessories should comprise of Pre and Fine air filter,Air Purifier, centrifugal fan, ducting network, air supply grilles, gravity dampers, electrical and instrumentation etc.) |
| 238 | Supply of Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including all accessories as per specification. |
| 239 | Hydrant system along with pumping arrangement & associated Civil works for fire protection system |
| 240 | HVWS system (automatic emulsifier and manual hydrant point both) for 315 MVA ICT-2 No’s and 80MVAr Bus Reactor -2 nos. |
| 241 | NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 315MVA ICT-2 No’s, 80MVAR Bus reactor-2 nos. |
| 242 | 250 KVA, silent type DG Set with AMF including Panel & all accessories and including earthing arrangement alongwith outdoor distibution board as per scheme requirement. |
| 243 | Lighting System Supply of Outdoor Lighting |
| 244 | Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, open store shed, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc. |
| 245 | Supply of Public Addressing System & CCTV complete with all accessories as per specification. |
| 246 | Public Addressing System & CCTV complete with all accessories as per specification. |
| 247 | Supply of Lightining System |
| 248 | Lightning protection system LCLM (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation. |
| 249 | F&I of Isolators, with both manual and motor driven operating mechanisms along with Support Insulators, clamps & connectors as required and as per spefication |
| 250 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 251 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 252 | 145KV, 3150A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 253 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Tandem Isolator |
| 254 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch. |
| 255 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch. |
| 256 | F&I of Isolator mounting structures, foundation bolts, nuts bolts etc. as required. and as per spefication |
| 257 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 258 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 259 | 145KV, 3150A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 260 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Tandem Isolator |
| 261 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch. |
| 262 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch. |
| 263 | F&I of insulator string assembly with antifog insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required. and as per spefication |
| 264 | 400kV, 4X160kN Quad tension string suitable for Quad Moose conductor. |
| 265 | 400kV, 2X160kN Double tension string suitable for Single Moose conductor. |
| 266 | 400kV, 2X120kN Double suspension string suitable for Quad Moose conductor. |
| 267 | 132kV, 2x90kN double tension string suitable for Single AAAC Panther conductor. |
| 268 | 132kV, 2x120kN double suspension string suitable for Twin MOOSE conductor. |
| 269 | 132kV, 2x160kN double tension string suitable for Twin MOOSE conductor. |
| 270 | 132kV, 2X120kN Double suspension string suitable for Quad Moose conductor. |
| 271 | 132kV, 4X160kN Quad tension string suitable for Quad Moose conductor. |
| 272 | F&I of Conductors, Clamp Connectors as required and as per spefication |
| 273 | 4'' IPS Aluminium Tubular Conductors (Schedule 40) with flexi connectors, expansion joints, T- joints, end caps etc as required. |
| 274 | ACSR Moose Conductor as per site requirement |
| 275 | Clamps & Connectors as per requirement |
| 276 | F&I of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required and as per specification |
| 277 | 420KV, BPI |
| 278 | 145KV, BPI |
| 279 | 72.5KV, BPI |
| 280 | F&I of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required. and as per specification |
| 281 | 420KV, BPI |
| 282 | 145KV, BPI |
| 283 | 72.5KV, BPI |
| 284 | F&I of Station Service Transformer (Energy efficiency level-3) and accessories as per specification. |
| 285 | 630 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors. |
| 286 | 440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 630KVA Station Service Transformer |
| 287 | F&I of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required and as per specification |
| 288 | 398kV, 20kA, LA |
| 289 | 120kV, 10kA, LA |
| 290 | 60kV, 10kA, LA |
| 291 | F&I of Surge Arrester support structures, foundation bolts, nuts bolts etc as required and as per specification. |
| 292 | 398kV, 20kA, LA |
| 293 | 120kV, 10kA, LA |
| 294 | 60kV, 10kA, LA |
| 295 | F&I of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required and as per specification. |
| 296 | 400kV, 8800pF, 3 Wdg CVT. |
| 297 | 132kV, 4400pF, 3 Wdg CVT. |
| 298 | 400KV, 3150A Wave Trap |
| 299 | 132KV, 800A Wave Trap. |
| 300 | F&I of CVT pipe/Lattice support structure, foundation bolts, nuts bolts etc as required and as per specification. |
| 301 | 400kV, 8800pF, 3 Wdg CVT. |
| 302 | 132kV, 4400pF, 3 Wdg CVT. |
| 303 | F&I of outdoor AIS Circuit Breaker along with clamps & connectors, support structures, foundation bolts and all other accessories as required and as per specification. |
| 304 | 145kV, 3150A, 40kA for 3 sec. |
| 305 | 72.5kV, 1250A, 40kA for 3 sec. |
| 306 | F&I of Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required and as per specification |
| 307 | 400kV BMK |
| 308 | 132kV BMK |
| 309 | F&I of CT & PT alongwith junction box, clamps & connectors and other accessories as required and as per specification |
| 310 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 311 | 132kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 315MVA trafo bay |
| 312 | 132kV, 3000-1600/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for Bus coupler bay |
| 313 | 72.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for transformer tertiary bay |
| 314 | 132kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 315 | 72.5kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 316 | F&I of CT/PT support structures, foundation bolts, nuts bolts etc as required and as per specification. |
| 317 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 318 | 132kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 315MVA trafo bay |
| 319 | 132kV, 3000-1600/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for Bus coupler bay |
| 320 | 72.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for transformer tertiary bay |
| 321 | 132kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 322 | 72.5kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 323 | F&I of Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required for 400kV GIS |
| 324 | 400kV Bus Bar Protection Panel |
| 325 | 400kV Line CRP |
| 326 | 400/132kV ICT CRP (315MVA) |
| 327 | 400kV Bus Reactor CRP |
| 328 | 400kV Tie Breaker CRP |
| 329 | F&I of Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required for 132kV AIS |
| 330 | 132kV Line CRP (with line differential) |
| 331 | 400/132kV Transformer CRP (315MVA) |
| 332 | 132kV Bus Coupler CRP |
| 333 | 132kV Bus Bar CRP |
| 334 | F&I of Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required for 72.5kV AIS |
| 335 | Station Service Transformer control & Protection Panel |
| 336 | Relevant software for relay configuration & setting, maintenance etc. |
| 337 | F&I of Phasor Measurement Unit as required and as per specification. |
| 338 | Phasor Measurement Unit |
| 339 | F&I of Complete Substation System Automation System (As per specification) |
| 340 | Station HMI (Main, Redundant and Metering) with Industrial PC |
| 341 | Maintenance HMI (DR Workstation) with Industrial PC |
| 342 | Gate way with PLCC and Fibre Optic Modem and Panel |
| 343 | SAS Inverter (5kVA) |
| 344 | Colour Laser MFM Printer |
| 345 | GPS Clock System |
| 346 | 16 port Ethernet Switch |
| 347 | All interphase equipment for Gateway to SLDC |
| 348 | VDU 75 inch |
| 349 | Aux BCU with panel as per scheme requirement |
| 350 | All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords,furnitures for HMIs and printers, cables etc as per requirement |
| 351 | Station Ethernet Switch |
| 352 | SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification. |
| 353 | Red Box |
| 354 | Integration of the PMU and the Meters with the PDC, CDCS |
| 355 | F&I of 400 kV GIS Equipment as per specification. |
| 356 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification |
| 357 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Transformer bay Module with CSD as per technical specifcation |
| 358 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module without CSD as per technical specification. |
| 359 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification. |
| 360 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus Reactor bay Module with CSD as per technical specification |
| 361 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement. |
| 362 | 400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines. |
| 363 | 400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS) |
| 364 | 10 Ton EOT Crane for 400kV GIS Building |
| 365 | Scissor Lift |
| 366 | F&I of Testing And Maintenance Equipment of GIS as specified. |
| 367 | SF6 Gas Processing, Drying, Storage & Filling Unit |
| 368 | SF6 gas quality testing unit |
| 369 | SF6 Gas Leak Detector |
| 370 | SF6 gas Mask |
| 371 | F&I of 315MVA, 400/132/33kV, ONAN/ ONAF/ODAF or ONAN/ONAF1/ONAF2, ICT along with all accessories and below: (including terminal connectors and other acessories as per technical specification) |
| 372 | 315 MVA, 400/132/33 kV, Three phase Transformer with OLTC & Oil |
| 373 | Oil & winding temperature monitoring system (FO based) |
| 374 | Online DGA (Multi gas) |
| 375 | Online insulating drying system |
| 376 | Maintenance free breather |
| 377 | RTCC Panel with AVR (TMS) |
| 378 | 10% Extra OIL for each transformer |
| 379 | Rail track for transformer |
| 380 | Pulling block for transformer |
| 381 | F&I of 80 MVAR Bus Reactor (with Oil) as per specification. |
| 382 | 80 MVAR, 420KV, 3 Phase, Star with Neutral brought out, ONAN coreless Bus Reactor along with Marshalling Kiosk with accessories etc as per technical specification with 10% spare oil |
| 383 | Pulling block for reactor |
| 384 | F&I of Battery & Battery Chargers, DCDB & ACDB as per specification |
| 385 | 220V VRLA Battery 1600AH |
| 386 | 220V, Dual Float Cum Boost Chargers for 220V Battery 350A |
| 387 | 220V, DCDB |
| 388 | 48V VRLA type Battery Bank 600AH |
| 389 | 48V, Dual Float cum Boost Chargers for 48V Battery 130A |
| 390 | 48V, DCDB |
| 391 | Main ACDB |
| 392 | Sub ACDB |
| 393 | MLDB with 415V/415V, 100kVA isolation transformer |
| 394 | ELDB with 415V/415V, 50kVA isolation transformer |
| 395 | HVAC DB |
| 396 | MCBDB |
| 397 | Aux ACDBs, Sub DCDBs etc, as per requirement |
| 398 | F&I of Power Line Carrier Communication Equipments as per specification |
| 399 | HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT) |
| 400 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 200 km) for 400kV |
| 401 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km ) for 132kV |
| 402 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 200 km(400kV) |
| 403 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 50 km(132kV) |
| 404 | LMU and LMDU |
| 405 | EPAX system and telephone system with redundant power supply card and CPU along with E1 interface card. |
| 406 | CAT 6 armoured cable. |
| 407 | 2 wire telephone set |
| 408 | Audio Cable |
| 409 | F&I of OPGW equipments as per specification as per specificationTransmission Equipment & SDH Equipment -STM16(ADM- up to five Direction) |
| 410 | Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding Sl. No. 28 & 29 below.) |
| 411 | F&I of OPGW equipments as per specification as per specificationOptical Interface/SFP for: |
| 412 | SFP to support STM-4 upto 150km. |
| 413 | SFP to support STM-16 upto 150km. |
| 414 | F&I of OPGW equipments as per specification as per specificationTributary Cards |
| 415 | E1 interface card (Minimum 63 interfaces per card) |
| 416 | Ethernet interfaces with minimum of 10/100/1000Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card) |
| 417 | 8 Port VOIP for remote locations |
| 418 | Analog Telephone( 2-wire telephone for VOIP Gateway location) |
| 419 | IEEE C37.94 (4 interfaces) to E1 converter/interface for intergration with SDH equipment |
| 420 | F&I of OPGW equipments as per specification as per specificationEquipment Cabinets with power distribution Circuit breakers, Fan Cable Tray Cable glands entry from Top and bottom |
| 421 | For SDH equipment(including DDF patching facilities and other accessories |
| 422 | Main Distribution Frame(100 pairs) |
| 423 | F&I of OPGW equipments as per specification as per specificationCraft Terminal |
| 424 | Hardware (LAPTOP) |
| 425 | Software |
| 426 | Pre connectorized optical patch cords(Minium 8 patch cords per station) |
| 427 | Firewall with deep inspection for IEC 104, IEC 61850 ,IEC 62443 certified with 5 years warranty |
| 428 | Time synchronisation clock (MTCTE certified with multiband receiver) with all other accessories, cables etc. |
| 429 | F&I of XLPE Armoured, LT Power Cable (1.1kV grade) as per specification |
| 430 | 2C, 6sqmm Cu |
| 431 | 4C, 16sqmm Cu |
| 432 | 3.5C, 35sqmm Al |
| 433 | 1C, 150sqmm Cu |
| 434 | 3.5C, 70sqmm Al |
| 435 | 3.5C, 150sqmm Al |
| 436 | 3.5C, 400sqmm Al |
| 437 | Cable supports and other cable accessories |
| 438 | Others ( Cable for Fire Fighting, Illumination etc) |
| 439 | F&I of PVC Armoured Cu LT Control Cable (1.1 kV grade) as per specification |
| 440 | 4C, 2.5sqmm |
| 441 | 5C, 2.5sqmm |
| 442 | 7C, 2.5sqmm |
| 443 | 12C, 2.5sqmm |
| 444 | 17C, 2.5sqmm |
| 445 | 19C, 2.5sqmm |
| 446 | Cable supports and other cable accessories |
| 447 | F&I of Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc. |
| 448 | 40 mm Dia MS Rod for Main/Auxiliary Earthmat |
| 449 | Earthing Conductor: 40 Mm Dia MS Rod For Riser From The Burial Earth Mat To Equipment,Structure, Fence Etc) |
| 450 | Earthing Conductor: 75X 12 Mm GS (HDG) Flat For equipment and structure earthing |
| 451 | Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc) |
| 452 | Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover. |
| 453 | Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover. |
| 454 | Soil Resistivity Test And Soil Treatment As And When Required |
| 455 | Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat) |
| 456 | Separate Earthing For 400 kV GIS Building with earth electrodes & Copper earthing conductors etc. complete with all respects |
| 457 | Separate Earthing for all other switchyard buildings, fencing etc. with earth electrodes, GS earthing conductors etc. complete with all respects |
| 458 | F&I of Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc as required complete with foundation bolts, fastners etc. |
| 459 | 400kV Columns with peak |
| 460 | 400kV Beams |
| 461 | 132kV Columns with/without peak |
| 462 | 132kV Beams |
| 463 | F&I of Fire Alarm & Detection including all accessories as per specification |
| 464 | Fire Alarm & Detection system for 400kV GIS Buildings, Control Room , Panel Room, DB room, Battery Room including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc. |
| 465 | Portable and wheel/trolley mounted Fire Extinguishers for Control Room Building and Switchyard as per specification and Portable Fire Extinguisher for 400kV GIS Hall each (5kg X 6 Nos),Control room (2kg X 6 Nos), Security Barrack (2kg X 6Nos),Guard room (Security Booth) (2kg X 3Nos), Switchyard (5kg X 4Nos) ( as per specification. |
| 466 | Dry powder chemical type 10 kg. For 630 kVA transformer |
| 467 | Fire fire fighting system (sprinkler system) for control room as per requirement |
| 468 | F&I of HVAC & VENTILATION |
| 469 | 2 TON CAPACITY SPLIT AIR CONDITIONING UNITS for CRP/PLCC/DB Room with N+1 requirements |
| 470 | Ventilation system for 400kV GIS Building (Ventilation System with Centrifugal Fan and related Accessories should comprise of Pre and Fine air filter,Air Purifier, centrifugal fan, ducting network, air supply grilles, gravity dampers, electrical and instrumentation etc.) |
| 471 | F&I of Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including all accessories as per specification. |
| 472 | Hydrant system along with pumping arrangement & associated Civil works for fire protection system |
| 473 | HVWS system (automatic emulsifier and manual hydrant point both) for 315 MVA ICT-2 No’s and 80MVAr Bus Reactor -2 nos. |
| 474 | NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 315MVA ICT-2 No’s, 80MVAR Bus reactor-2 nos. |
| 475 | 250 KVA, silent type DG Set with AMF including Panel & all accessories and including earthing arrangement alongwith outdoor distibution board as per scheme requirement. |
| 476 | Lighting System F&I of Outdoor Lighting |
| 477 | Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, open store shed, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc. |
| 478 | F&I of Public Addressing System & CCTV complete with all accessories as per specification. |
| 479 | Public Addressing System & CCTV complete with all accessories as per specification. |
| 480 | F&I of Lightining System |
| 481 | Lightning protection system LCLM (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation. |
| 482 | Erection of Isolator mounting structure including contsruction of foundation and supply of all foundation materials and labour etc. |
| 483 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 484 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 485 | 145KV, 3150A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 486 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Tandem Isolator |
| 487 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch. |
| 488 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch. |
| 489 | Erection Testing and Commissioning of Isolators with all accessories, laying and termination of LT power & control cables, fitting fixing of clamps and jumpers etc. as required. |
| 490 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 491 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 492 | 145KV, 3150A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 493 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Tandem Isolator |
| 494 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch. |
| 495 | 72.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch. |
| 496 | Hoisting and erection of hardware fittings complete set with nuts bolts, clamps and other accessories as required and stringing of Bus/conductor/jumpers as required. |
| 497 | 400kV, 4X160kN Quad tension string suitable for Quad Moose conductor. |
| 498 | 400kV, 2X160kN Double tension string suitable for Single Moose conductor. |
| 499 | 400kV, 2X120kN Double suspension string suitable for Quad Moose conductor. |
| 500 | 132kV, 2x90kN double tension string suitable for Single AAAC Panther conductor. |
| 501 | 132kV, 2x120kN double suspension string suitable for Twin MOOSE conductor. |
| 502 | 132kV, 2x160kN double tension string suitable for Twin MOOSE conductor. |
| 503 | 132kV, 2X120kN Double suspension string suitable for Quad Moose conductor. |
| 504 | 132kV, 4X160kN Quad tension string suitable for Quad Moose conductor. |
| 505 | Erection Testing and Commissioning of Conductors, Clamp Connectors as required and as per spefication |
| 506 | 4'' IPS Aluminium Tubular Conductors (Schedule 40) with flexi connectors, expansion joints, T- joints, end caps etc as required. |
| 507 | ACSR Moose Conductor as per site requirement |
| 508 | Clamps & Connectors as per requirement |
| 509 | Erection of BPI mounting structures including contsruction of foundation and supply of all foundation materials and labour etc. |
| 510 | 420KV, BPI |
| 511 | 145KV, BPI |
| 512 | 72.5KV, BPI |
| 513 | Erection, Testing & Commissioning of 1 phase Solid core bus post insulator including clamp connectors and other accessories as required. |
| 514 | 420KV, BPI |
| 515 | 145KV, BPI |
| 516 | 72.5KV, BPI |
| 517 | Erection Testing and Commissioning of Station Service Transformer, PRP (with structure, if applicable) and its accessories as below including laying and termination of LT power and control cables |
| 518 | 630 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors. |
| 519 | 440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 630KVA Station Service Transformer |
| 520 | Erection of LA mounting structure including contsruction of foundation and supply of all foundation materials and labour etc. |
| 521 | 398kV, 20kA, LA |
| 522 | 120kV, 10kA, LA |
| 523 | 60kV, 10kA, LA |
| 524 | Erection, Testing & Commissioning of Surge Arrester alongwith erection of mounting structure, Including fitting and fixing of all accessories, clamps and connectors etc complete. |
| 525 | 398kV, 20kA, LA |
| 526 | 120kV, 10kA, LA |
| 527 | 60kV, 10kA, LA |
| 528 | Erection Testing & Commissioning of CVT and Wave Trap alongwith erection (for CVT), of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc. |
| 529 | 400kV, 8800pF, 3 Wdg CVT. |
| 530 | 132kV, 4400pF, 3 Wdg CVT. |
| 531 | 400KV, 3150A Wave Trap |
| 532 | 132KV, 800A Wave Trap. |
| 533 | Erection of CVT mounting structure including contsruction of foundation and supply of all foundation materials and labour etc. |
| 534 | 400kV, 8800pF, 3 Wdg CVT. |
| 535 | 132kV, 4400pF, 3 Wdg CVT. |
| 536 | Erection Testing & Commissioning of Circuit Breaker (Outdoor AIS) alongwith erection of mounting structures, laying and termination of LT power and control cables including fitting and fixing of all accessories, clamps and connectors and including contsruction of foundation and supply of all foundation materials and labour complete. |
| 537 | 145kV, 3150A, 40kA for 3 sec. |
| 538 | 72.5kV, 1250A, 40kA for 3 sec. |
| 539 | Erection Testing & Commissioning of Bay Marshalling Kiosk alongwith structure including laying and termination of LT power and control cables, construction of foundation alongwith supply of all foundation materials and labour as required. |
| 540 | 400kV BMK |
| 541 | 132kV BMK |
| 542 | Erection of Instrument Transformer (CT & PT) mounting structure including contsruction of foundation and supply of all foundation materials and labour etc. |
| 543 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 544 | 132kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 315MVA trafo bay |
| 545 | 132kV, 3000-1600/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for Bus coupler bay |
| 546 | 72.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for transformer tertiary bay |
| 547 | 132kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 548 | 72.5kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 549 | Erection Testing & Commissioning of Instrument Transformer (CT & PT) alongwith erection of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc complete. |
| 550 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 551 | 132kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 315MVA trafo bay |
| 552 | 132kV, 3000-1600/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for Bus coupler bay |
| 553 | 72.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT for transformer tertiary bay |
| 554 | 132kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 555 | 72.5kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 556 | Erection Testing & Commissioning and installation of Control, Relay & Protection Panels (Simplex Type) including laying and termination of LT power and control cables for 400kV GIS |
| 557 | 400kV Bus Bar Protection Panel |
| 558 | 400kV Line CRP |
| 559 | 400/132kV ICT CRP (315MVA) |
| 560 | 400kV Bus Reactor CRP |
| 561 | 400kV Tie Breaker CRP |
| 562 | Erection Testing & Commissioning and installation of Control, Relay & Protection Panels (Simplex Type) including laying and termination of LT power and control cables for 132kV AIS |
| 563 | 132kV Line CRP (with line differential) |
| 564 | 400/132kV Transformer CRP (315MVA) |
| 565 | 132kV Bus Coupler CRP |
| 566 | 132kV Bus Bar CRP |
| 567 | Erection Testing & Commissioning and installation of Control, Relay & Protection Panels (Simplex Type) including laying and termination of LT power and control cables for 72.5kV AIS |
| 568 | Station Service Transformer control & Protection Panel |
| 569 | Relevant software for relay configuration & setting, maintenance etc. |
| 570 | Erection Testing & Commissioning and installation of Phasor Measurement Unit as required and as per specification. |
| 571 | Phasor Measurement Unit |
| 572 | Erection Testing & Commissioning and installation of Complete Substation System Automation System (As per specification) including laying and termination of LT power and control cables |
| 573 | Station HMI (Main, Redundant and Metering) with Industrial PC |
| 574 | Maintenance HMI (DR Workstation) with Industrial PC |
| 575 | Gate way with PLCC and Fibre Optic Modem and Panel |
| 576 | SAS Inverter (5kVA) |
| 577 | Colour Laser MFM Printer |
| 578 | GPS Clock System |
| 579 | 16 port Ethernet Switch |
| 580 | All interphase equipment for Gateway to SLDC |
| 581 | VDU 75 inch |
| 582 | Aux BCU with panel as per scheme requirement |
| 583 | All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords,furnitures for HMIs and printers, cables etc as per requirement |
| 584 | Station Ethernet Switch |
| 585 | SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification. |
| 586 | Red Box |
| 587 | Integration of the PMU and the Meters with the PDC, CDCS |
| 588 | Erection Testing & Commissioning and installation of 400 kV GIS Modules and Equipment including laying and termination of LT power and control cables, installation of all accessories as required including construction of foundation and supply of all foundation materials and labour. |
| 589 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification |
| 590 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Transformer bay Module with CSD as per technical specifcation |
| 591 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module without CSD as per technical specification. |
| 592 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification. |
| 593 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus Reactor bay Module with CSD as per technical specification |
| 594 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement. |
| 595 | 400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines. |
| 596 | 400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS) |
| 597 | 10 Ton EOT Crane for 400kV GIS Building |
| 598 | Scissor Lift |
| 599 | Installation and demo of Testing And Maintenance Equipment of GIS |
| 600 | SF6 Gas Processing, Drying, Storage & Filling Unit |
| 601 | SF6 gas quality testing unit |
| 602 | SF6 Gas Leak Detector |
| 603 | SF6 gas Mask |
| 604 | Erection, testing and commissioning of 315MVA, 400/132/33kV, ONAN/ ONAF/ODAF or ONAN/ONAF1/ONAF2 ICT and all accessories, terminal connectors as per technical specification including laying and termination of LT power, control cables and other signalling cables as required. |
| 605 | 315 MVA, 400/132/33 kV, Three phase Transformer with OLTC & Oil |
| 606 | Oil & winding temperature monitoring system (FO based) |
| 607 | Online DGA (Multi gas) |
| 608 | Online insulating drying system |
| 609 | Maintenance free breather |
| 610 | RTCC Panel with AVR (TMS) |
| 611 | Rail track for transformer |
| 612 | Pulling block for transformer |
| 613 | Erection, Testing & Commissioning of 80 MVAR Bus Reactor including laying and termination of LT power and control cables and other signalling cables as required. |
| 614 | 80 MVAR, 420KV, 3 Phase, Star with Neutral brought out, ONAN coreless Bus Reactor along with Marshalling Kiosk with accessories etc as per technical specification with 10% spare oil |
| 615 | Pulling block for reactor |
| 616 | Erection, Testing & Commissioning of Battery & Battery Chargers, DCDB & ACDB as per specification including laying and termination of LT power and control cables as required. |
| 617 | 220V VRLA Battery 1600AH |
| 618 | 220V, Dual Float Cum Boost Chargers for 220V Battery 350A |
| 619 | 220V, DCDB |
| 620 | 48V VRLA type Battery Bank 600AH |
| 621 | 48V, Dual Float cum Boost Chargers for 48V Battery 130A |
| 622 | 48V, DCDB |
| 623 | Main ACDB |
| 624 | Sub ACDB |
| 625 | MLDB with 415V/415V, 100kVA isolation transformer |
| 626 | ELDB with 415V/415V, 50kVA isolation transformer |
| 627 | HVAC DB |
| 628 | MCBDB |
| 629 | Aux ACDBs, Sub DCDBs etc, as per requirement |
| 630 | Erection, Testing & Commissioning of Power Line Carrier Communication Equipments including laying and termination of LT power and control cables |
| 631 | HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT) |
| 632 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 200 km) for 400kV |
| 633 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km ) for 132kV |
| 634 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 200 km(400kV) |
| 635 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 50 km(132kV) |
| 636 | LMU and LMDU |
| 637 | EPAX system and telephone system with redundant power supply card and CPU along with E1 interface card. |
| 638 | CAT 6 armoured cable. |
| 639 | 2 wire telephone set |
| 640 | Audio Cable |
| 641 | Erection, Testing and Commissioning of OPGW equipments as per specification including laying and termination of LT power and control cables and other accessories as required.Transmission Equipment & SDH Equipment -STM16(ADM- up to five Direction) |
| 642 | Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding Sl. No. 28 & 29 below.) |
| 643 | Erection, Testing and Commissioning of OPGW equipments as per specification including laying and termination of LT power and control cables and other accessories as required.Optical Interface/SFP for: |
| 644 | SFP to support STM-4 upto 150km. |
| 645 | SFP to support STM-16 upto 150km. |
| 646 | Erection, Testing and Commissioning of OPGW equipments as per specification including laying and termination of LT power and control cables and other accessories as required.Tributary Cards |
| 647 | E1 interface card (Minimum 63 interfaces per card) |
| 648 | Ethernet interfaces with minimum of 10/100/1000Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card) |
| 649 | 8 Port VOIP for remote locations |
| 650 | Analog Telephone( 2-wire telephone for VOIP Gateway location) |
| 651 | IEEE C37.94 (4 interfaces) to E1 converter/interface for intergration with SDH equipment |
| 652 | Erection, Testing and Commissioning of OPGW equipments as per specification including laying and termination of LT power and control cables and other accessories as required.Equipment Cabinets with power distribution Circuit breakers, Fan Cable Tray Cable glands entry from Top and bottom |
| 653 | For SDH equipment(including DDF patching facilities and other accessories |
| 654 | Main Distribution Frame(100 pairs) |
| 655 | Erection, Testing and Commissioning of OPGW equipments as per specification including laying and termination of LT power and control cables and other accessories as required.Craft Terminal |
| 656 | Hardware (LAPTOP) |
| 657 | Software |
| 658 | Pre connectorized optical patch cords(Minium 8 patch cords per station) |
| 659 | Firewall with deep inspection for IEC 104, IEC 61850 ,IEC 62443 certified with 5 years warranty |
| 660 | Time synchronisation clock (MTCTE certified with multiband receiver) with all other accessories, cables etc. |
| 661 | Concreting of Gantry foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel. Also provide 300 mm boulder soiling below the foundation |
| 662 | 400kV Columns with peak |
| 663 | Concreting of Gantry foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel. Also provide 300 mm boulder soiling below the foundation |
| 664 | 132kV Columns with/without peak |
| 665 | Installation & Testing of complete Earthing system as per technical specification. |
| 666 | 40 mm Dia MS Rod for Main/Auxiliary Earthmat |
| 667 | Earthing Conductor: 40 Mm Dia MS Rod For Riser From The Burial Earth Mat To Equipment,Structure, Fence Etc) |
| 668 | Earthing Conductor: 75X 12 Mm GS (HDG) Flat For equipment and structure earthing |
| 669 | Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc) |
| 670 | Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover. |
| 671 | Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover. |
| 672 | Soil Resistivity Test And Soil Treatment As And When Required |
| 673 | Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat) |
| 674 | Separate Earthing For 400 kV GIS Building with earth electrodes & Copper earthing conductors etc. complete with all respects |
| 675 | Separate Earthing for all other switchyard buildings, fencing etc. with earth electrodes, GS earthing conductors etc. complete with all respects |
| 676 | Erection of Lattice structures for incoming and outgoing gantries etc. |
| 677 | 400kV Columns with peak |
| 678 | 400kV Beams |
| 679 | 132kV Columns with/without peak |
| 680 | 132kV Beams |
| 681 | Installation and Testing & Commissioning of Fire Alarm & Detection including laying and termination of LT power and control cables |
| 682 | Fire Alarm & Detection system for 400kV GIS Buildings, Control Room , Panel Room, DB room, Battery Room including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc. |
| 683 | Fire fire fighting system (sprinkler system) for control room as per requirement |
| 684 | Erection, testing, commissioning HVAC & VENTILATION |
| 685 | 2 TON CAPACITY SPLIT AIR CONDITIONING UNITS for CRP/PLCC/DB Room with N+1 requirements |
| 686 | Ventilation system for 400kV GIS Building (Ventilation System with Centrifugal Fan and related Accessories should comprise of Pre and Fine air filter,Air Purifier, centrifugal fan, ducting network, air supply grilles, gravity dampers, electrical and instrumentation etc.) |
| 687 | Erection and Testing & Commissioning of Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including laying and termination of LT power and control cables |
| 688 | Hydrant system along with pumping arrangement & associated Civil works for fire protection system |
| 689 | HVWS system (automatic emulsifier and manual hydrant point both) for 315 MVA ICT-2 No’s and 80MVAr Bus Reactor -2 nos. |
| 690 | NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 315MVA ICT-2 No’s, 80MVAR Bus reactor-2 nos. |
| 691 | 250 KVA, silent type DG Set with AMF including Panel & all accessories and including earthing arrangement alongwith outdoor distibution board as per scheme requirement. |
| 692 | Erection and Testing & Commissioning of Lighting System including laying and termination of illumination cables, GI shield wires etc. |
| 693 | Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, open store shed, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc. |
| 694 | Erection and Testing & Commissioning of Public Addressing System & CCTV complete with all accessories as per specification. |
| 695 | Public Addressing System & CCTV complete with all accessories as per specification. |
| 696 | Erection and Testing & Commissioning of Lightining including laying and termination of illumination cables, GI shield wires etc. |
| 697 | Lightning protection system LCLM (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation alongwith construction of foundation and supply of all foundation materials and labour and earthing arrangement |
| 698 | Site Preparation Works |
| 699 | Soil Investigation |
| 700 | Site Clearance including necessary excavation and dismantling of existing structure |
| 701 | Standards, Design and Drawing |
| 702 | Site Preparation and Earthfilling with Compaction |
| 703 | Earthcutting and necessary levelling |
| 704 | RCC Retaining wall with counterfort wall |
| 705 | Boulder Pitching with 100 mm PCC on top |
| 706 | Brick Boundary wall |
| 707 | Security Fencing |
| 708 | Buildings (including All services i.e. electrical, internal water supply, sanitary works, sewage system, furnishing, cable trench (present and future) complete) |
| 709 | 400 KV GIS cum Control Room/CRP/DB Building (PEB) alongwith GIS bay foundations complete [75m x (16+8)m] |
| 710 | Constrcution of Transformer and Reactor foundation including road cum rail track and all other accessories required for complete job |
| 711 | Counstruction of 315 MVA Power Transformer foundation with Burnt Oil Pit |
| 712 | Counstruction of 80MVAR Bus Reactor foundation with Burnt Oil Pit |
| 713 | Fire Protection Wall in RCC frame with 230 mm brick wall including supply of all foundation materials and labour on pile foundation |
| 714 | Fire Protection Wall for 315 MVA Transformer |
| 715 | Fire Protection Wall for 80 MVAr Reactor |
| 716 | HVWS with Water reserviour and Pumphouse |
| 717 | Supply and installation of Deep tubewell, with appropriate depth required to reach aquifer with PVC casing pipe (200 mm diameter minimum), 3 HP submersible mortor pump, 40 mm diameter CPVC column pipe and Construction of Water reservior and Pump house for fire fighting. |
| 718 | Water Supply work |
| 719 | Construction of RCC (M-25 grade) reservoir 600 mm above FGL (Capacity 15000 Ltr) alongwith supply and Installation of distribution network with CPVC pipe of 40 mm diameter and 25 mm diameter for connecting to Overhead tank of all buildings. |
| 720 | Cable Trench along with road crossing culvert for cables wherever necesarry along with switchyard work |
| 721 | A type |
| 722 | B Type |
| 723 | C Type |
| 724 | D Type |
| 725 | HDPE pipe of 150 mm dia |
| 726 | RCC Box Culvert |
| 727 | Approach Road (RCC) |
| 728 | Internal Road (RCC) |
| 729 | Antiweed treatment |
| 730 | PCC in Switchyard |
| 731 | Stone Spreading(Gravelling) in switchyard |
| 732 | Storm Water Drain |
| 733 | Sump Pit with electric pump set |
| 734 | Main Gate |
| 735 | Switchyard Gate |
| 736 | Rain water Harvesting with construction of RCC reservoir |
| 737 | Rain water Harvesting with construction of RCC reservoir |
| 738 | Supply of Isolators, with both manual and motor driven operating mechanisms along with Support Insulators, clamps & connectors as required and as per spefication |
| 739 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 740 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 741 | Supply of Isolator mounting structures, foundation bolts, nuts bolts etc. as required. and as per spefication |
| 742 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 743 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 744 | Supply of insulator string assembly with antifog insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required and as per spefication |
| 745 | 132kV, 2x70kN double suspension string suitable for Twin Panther conductors |
| 746 | 132kV, 2x90kN double tension string suitable for Twin Panther conductors |
| 747 | 132kV, 90kN tension string suitable for Single Panther conductor. |
| 748 | 132kV, 70kN suspension string suitable for Single Panther conductor. |
| 749 | Supply of Conductors, Clamp Connectors as required and as per spefication |
| 750 | ACSR Panther Conductor as per site requirement |
| 751 | Clamps & Connectors as per requirement |
| 752 | Supply of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required and as per specification |
| 753 | 145KV, BPI |
| 754 | Supply of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required. and as per specification |
| 755 | 145KV, BPI |
| 756 | Supply of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required and as per specification |
| 757 | 120kV, 10kA, LA |
| 758 | Supply of Surge Arrester support structures, foundation bolts, nuts bolts etc as required and as per specification. |
| 759 | 120kV, 10kA, LA |
| 760 | Supply of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required and as per specification. |
| 761 | 132kV, 4400pF, 3 Wdg CVT. |
| 762 | 132KV, 800A Wave Trap. |
| 763 | Supply of CVT pipe/Lattice support structure, foundation bolts, nuts bolts etc as required and as per specification. |
| 764 | 132kV, 4400pF, 3 Wdg CVT. |
| 765 | Supply of outdoor AIS Circuit Breaker along with clamps & connectors, support structures, foundation bolts and all other accessories as required and as per specification. |
| 766 | 145kV, 3150A, 40kA for 3 sec. |
| 767 | Supply of Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required and as per specification |
| 768 | 132kV BMK |
| 769 | Supply of CT & PT alongwith junction box, clamps & connectors and other accessories as required and as per specification |
| 770 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 771 | Supply of CT/PT support structures, foundation bolts, nuts bolts etc as required and as per specification. |
| 772 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 773 | Supply of Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required for 132kV AIS |
| 774 | 132kV Line CRP (with line differential) |
| 775 | Supply of Substation System Automation System (As per specification) |
| 776 | 16 port Ethernet Switch |
| 777 | SAMAST compliant ABT meters |
| 778 | Integration of two new CRP's with the existing SAS |
| 779 | Supply of Power Line Carrier Communication Equipments as per specification |
| 780 | HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT) |
| 781 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km ) for 132kV |
| 782 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(132kV) |
| 783 | LMU and LMDU |
| 784 | CAT 6 armoured cable. |
| 785 | 2 wire telephone set |
| 786 | Audio Cable |
| 787 | Supply of XLPE Armoured, LT Power Cable (1.1kV grade) as per specification |
| 788 | 2C, 6sqmm Cu |
| 789 | 4C, 16sqmm Cu |
| 790 | Cable supports and other cable accessories |
| 791 | Supply of PVC Armoured Cu LT Control Cable (1.1 kV grade) as per specification |
| 792 | 5C, 2.5sqmm |
| 793 | 12C, 2.5sqmm |
| 794 | 19C, 2.5sqmm |
| 795 | Cable supports and other cable accessories |
| 796 | Supply of Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc. |
| 797 | 75 x 12 mm GS(HDG) Flat for Main/Auxiliary Earthmat/Riser |
| 798 | Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc) |
| 799 | Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover. |
| 800 | Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover. |
| 801 | Soil Resistivity Test And Soil Treatment As And When Required |
| 802 | Separate Earthing for all other switchyard buildings, fencing etc. with earth electrodes, GS earthing conductors etc. complete with all respects |
| 803 | Supply of Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc as required complete with foundation bolts, fastners etc. |
| 804 | 132kV Columns with/without peak |
| 805 | 132kV Beams |
| 806 | Lighting System Supply of Outdoor Lighting |
| 807 | Outdoor LED lighting for new extended switchyard area |
| 808 | Supply of Lightining System |
| 809 | Lightning protection system LCLM (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation. |
| 810 | F&I of Isolators, with both manual and motor driven operating mechanisms along with Support Insulators, clamps & connectors as required and as per spefication |
| 811 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 812 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 813 | F&I of Isolator mounting structures, foundation bolts, nuts bolts etc. as required. and as per spefication |
| 814 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 815 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 816 | F&I of insulator string assembly with antifog insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required and as per spefication |
| 817 | 132kV, 2x70kN double suspension string suitable for Twin Panther conductors |
| 818 | 132kV, 2x90kN double tension string suitable for Twin Panther conductors |
| 819 | 132kV, 90kN tension string suitable for Single Panther conductor. |
| 820 | 132kV, 70kN suspension string suitable for Single Panther conductor. |
| 821 | F&I of Conductors, Clamp Connectors as required and as per spefication |
| 822 | ACSR Panther Conductor as per site requirement |
| 823 | Clamps & Connectors as per requirement |
| 824 | F&I of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required and as per specification |
| 825 | 145KV, BPI |
| 826 | F&I of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required. and as per specification |
| 827 | 145KV, BPI |
| 828 | F&I of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required and as per specification |
| 829 | 120kV, 10kA, LA |
| 830 | F&I of Surge Arrester support structures, foundation bolts, nuts bolts etc as required and as per specification. |
| 831 | 120kV, 10kA, LA |
| 832 | F&I of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required and as per specification. |
| 833 | 132kV, 4400pF, 3 Wdg CVT. |
| 834 | 132KV, 800A Wave Trap. |
| 835 | F&I of CVT pipe/Lattice support structure, foundation bolts, nuts bolts etc as required and as per specification. |
| 836 | 132kV, 4400pF, 3 Wdg CVT. |
| 837 | F&I of outdoor AIS Circuit Breaker along with clamps & connectors, support structures, foundation bolts and all other accessories as required and as per specification. |
| 838 | 145kV, 3150A, 40kA for 3 sec. |
| 839 | F&I of Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required and as per specification |
| 840 | 132kV BMK |
| 841 | F&I of CT & PT alongwith junction box, clamps & connectors and other accessories as required and as per specification |
| 842 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 843 | F&I of CT/PT support structures, foundation bolts, nuts bolts etc as required and as per specification. |
| 844 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 845 | F&I of Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required for 132kV AIS |
| 846 | 132kV Line CRP (with line differential) |
| 847 | F&I of Substation System Automation System (As per specification) |
| 848 | 16 port Ethernet Switch |
| 849 | SAMAST compliant ABT meters |
| 850 | Integration of two new CRP's with the existing SAS |
| 851 | F&I of Power Line Carrier Communication Equipments as per specification |
| 852 | HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT) |
| 853 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km ) for 132kV |
| 854 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(132kV) |
| 855 | LMU and LMDU |
| 856 | CAT 6 armoured cable. |
| 857 | 2 wire telephone set |
| 858 | Audio Cable |
| 859 | F&I of XLPE Armoured, LT Power Cable (1.1kV grade) as per specification |
| 860 | 2C, 6sqmm Cu |
| 861 | 4C, 16sqmm Cu |
| 862 | Cable supports and other cable accessories |
| 863 | F&I of PVC Armoured Cu LT Control Cable (1.1 kV grade) as per specification |
| 864 | 5C, 2.5sqmm |
| 865 | 12C, 2.5sqmm |
| 866 | 19C, 2.5sqmm |
| 867 | Cable supports and other cable accessories |
| 868 | F&I of Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc. |
| 869 | 75 x 12 mm GS(HDG) Flat for Main/Auxiliary Earthmat/Riser |
| 870 | Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc) |
| 871 | Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover. |
| 872 | Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover. |
| 873 | Soil Resistivity Test And Soil Treatment As And When Required |
| 874 | Separate Earthing for all other switchyard buildings, fencing etc. with earth electrodes, GS earthing conductors etc. complete with all respects |
| 875 | F&I of Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc as required complete with foundation bolts, fastners etc. |
| 876 | 132kV Columns with/without peak |
| 877 | 132kV Beams |
| 878 | Lighting System F&I of Outdoor Lighting |
| 879 | Outdoor LED lighting for new extended switchyard area |
| 880 | F&I of Lightining System |
| 881 | Lightning protection system LCLM (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation. |
| 882 | Erection of Isolator mounting structure including contsruction of foundation and supply of all foundation materials and labour etc. |
| 883 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 884 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 885 | Erection Testing and Commissioning of Isolators with all accessories, laying and termination of LT power & control cables, fitting fixing of clamps and jumpers etc. as required. |
| 886 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch |
| 887 | 145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch |
| 888 | Hoisting and erection of hardware fittings complete set with nuts bolts, clamps and other accessories as required and stringing of Bus/conductor/jumpers as required. |
| 889 | 132kV, 2x70kN double suspension string suitable for Twin Panther conductors |
| 890 | 132kV, 2x90kN double tension string suitable for Twin Panther conductors |
| 891 | 132kV, 90kN tension string suitable for Single Panther conductor. |
| 892 | 132kV, 70kN suspension string suitable for Single Panther conductor. |
| 893 | Erection, Testing & Commissioning of Conductors, Clamp Connectors as required and as per spefication |
| 894 | ACSR Panther Conductor as per site requirement |
| 895 | Clamps & Connectors as per requirement |
| 896 | Erection of BPI mounting structures including contsruction of foundation and supply of all foundation materials and labour |
| 897 | 145KV, BPI |
| 898 | Erection, Testing & Commissioning of 1 phase Solid core bus post insulator including clamp connectors and other accessories as required. |
| 899 | 145KV, BPI |
| 900 | Erection of LA mounting structure including contsruction of foundation and supply of all foundation materials and labour |
| 901 | 120kV, 10kA, LA |
| 902 | Erection, Testing & Commissioning of Surge Arrester alongwith erection of mounting structure, Including fitting and fixing of all accessories, clamps and connectors etc complete. |
| 903 | 120kV, 10kA, LA |
| 904 | Erection Testing & Commissioning of CVT and Wave Trap alongwith erection (for CVT), of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc. |
| 905 | 132kV, 4400pF, 3 Wdg CVT. |
| 906 | 132KV, 800A Wave Trap. |
| 907 | Erection of CVT mounting structure including contsruction of foundation and supply of all foundation materials and labour |
| 908 | 132kV, 4400pF, 3 Wdg CVT. |
| 909 | Erection Testing & Commissioning of Circuit Breaker (Outdoor AIS) alongwith erection of mounting structures, laying and termination of LT power and control cables including fitting and fixing of all accessories, clamps and connectors and including contsruction of foundation and supply of all foundation materials and labour complete. |
| 910 | 145kV, 3150A, 40kA for 3 sec. |
| 911 | Erection Testing & Commissioning of Bay Marshalling Kiosk alongwith structure including laying and termination of LT power and control cables, construction of foundation alongwith supply of all foundation materials and labour as required. |
| 912 | 132kV BMK |
| 913 | Erection Testing & Commissioning of Instrument Transformer (CT & PT) alongwith erection of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc complete. |
| 914 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 915 | Erection of Instrument Transformer (CT & PT) mounting structure including contsruction of foundation and supply of all foundation materials and labour |
| 916 | 132kV, 600-300/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 Ph, CT for line bay |
| 917 | Erection Testing & Commissioning and installation of Control, Relay & Protection Panels (Simplex Type) including laying and termination of LT power and control cables |
| 918 | 132kV Line CRP (with line differential) |
| 919 | Erection, Testing, Commissioning Substation System Automation System (As per specification ) |
| 920 | 16 port Ethernet Switch |
| 921 | SAMAST compliant ABT meters |
| 922 | Integration of two new CRP's with the existing SAS |
| 923 | Erection, Testing & Commissioning of Power Line Carrier Communication Equipments including laying and termination of LT power and control cables |
| 924 | HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT) |
| 925 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km ) for 132kV |
| 926 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(132kV) |
| 927 | LMU and LMDU |
| 928 | CAT 6 armoured cable. |
| 929 | 2 wire telephone set |
| 930 | Audio Cable |
| 931 | Concreting of Gantry foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel. Also provide 300 mm boulder soiling below the foundation |
| 932 | 132kV Columns with/without peak |
| 933 | Installation & Testing of complete Earthing system as per technical specification. |
| 934 | 75 x 12 mm GS(HDG) Flat for Main/Auxiliary Earthmat/Riser |
| 935 | Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc) |
| 936 | Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover. |
| 937 | Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover. |
| 938 | Soil Resistivity Test And Soil Treatment As And When Required |
| 939 | Separate Earthing for all other switchyard buildings, fencing etc. with earth electrodes, GS earthing conductors etc. complete with all respects |
| 940 | Erection of Lattice structures for incoming and outgoing gantries etc. |
| 941 | 132kV Columns with/without peak |
| 942 | 132kV Beams |
| 943 | Erection and Testing & Commissioning of Lighting System including laying and termination of illumination cables, GI shield wires etc. |
| 944 | Outdoor LED lighting for new extended switchyard area |
| 945 | Erection and Testing & Commissioning of Lightining including laying and termination of illumination cables, GI shield wires etc. |
| 946 | Lightning protection system LCLM (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation. |
| 947 | Site Preparation Works |
| 948 | Site Clearance including necessary excavation and dismantling of existing structure |
| 949 | Standards, Design and Drawing |
| 950 | Site Preparation and Earthfilling with Compaction |
| 951 | Earthcutting and necessary levelling |
| 952 | RCC Retaining wall with counterfort wall |
| 953 | Boundary wall |
| 954 | Buildings (including All services i.e. electrical, internal water supply, sanitary works, sewage system, furnishing complete) |
| 955 | G+4 Quarter |
| 956 | Water Supply work |
| 957 | Supply and installation of Deep tubewell, with appropriate depth required to reach aquifer with PVC casing pipe (250 mm diameter minimum), 3 HP submersible mortor pump, 40 mm diameter CPVC column pipe, one unit RCC (M-25 grade) Slow Sand Filter (Capacity 10,000 Ltr/hr) along with RCC (M-25 grade) reservoir 600 mm above FGL (Capacity 35,000 Ltr) Supply and Installation of distribution network with CPVC pipe of 40 mm diameter and 25 mm diameter for connecting to Overhead tank of all buildings. |
| 958 | Cable Trench along with road crossing culvert for cables wherever necesarry along with switchyard work |
| 959 | C Type |
| 960 | D Type |
| 961 | RCC Box Culvert |
| 962 | Internal Road (RCC) |
| 963 | Steps from colony to CRB |
| 964 | Antiweed treatment |
| 965 | PCC in Switchyard |
| 966 | Stone Spreading(Gravelling) in switchyard |
| 967 | Storm Water Drain |
| 968 | Supply of lattice-type galvanized (high-tensile steel and mild-steel) steel suspension towers, angle towers and special towers etc. complete with stubs, cleats, tower superstructures, step bolts, hangers and all associated accessories. The supply shall also include all types of galvanized iron (GI) nuts, bolts, washers, spring washers etc. required for tower assembly. All materials supplied shall conform to the relevant technical specifications and applicable standards stipulated in the tender documents. |
| 969 | High Tensile Steel |
| 970 | Mild Steel |
| 971 | Supply of Tower Accessories |
| 972 | Procurement of Danger plates. |
| 973 | Procurement of Phase plates.(Set of Three) |
| 974 | Procurement of Number plates. |
| 975 | Procurement of anti climbing device |
| 976 | Procurement of Circuit Plate |
| 977 | Procurement of Bird Guard (Set of Six) |
| 978 | Procurement of Bird Diverters as per CEA |
| 979 | Supply of ACSR Conductor |
| 980 | ACSR Moose conductor |
| 981 | Supply of Power Conductor Accessories |
| 982 | Stock bridge type Vibration Damper |
| 983 | Mid Span Compression Joint for Conductor |
| 984 | Repair Sleeve for Conductor |
| 985 | Bundle Spacer suitable for Quad ACSR Moose |
| 986 | Rigid Spacer for jumper suitable for Quad ACSR Moose |
| 987 | Supply of Tower earthing Accessories |
| 988 | 50 NB dia, 3 mtr long GI pipe electrode (driven) with test link |
| 989 | 50x6 mm GS flat as required |
| 990 | Counter Poise Earthing (Per Tower) |
| 991 | Other earthing accessories like GS steel wires, lugs etc |
| 992 | Supply of Fibre Optic Cables |
| 993 | 96 Fibre (DWSM) OPGW fibre optic cable |
| 994 | 96 Fibre Optic Approach Cable (DWSM96F) |
| 995 | Supply of OPGW HARDWARE/FITTINGS AND TERMINATIONS |
| 996 | OPGW Suspension Assembly |
| 997 | OPGW double tension pass through assembly |
| 998 | OPGW Double Tension Assembly for splicing location |
| 999 | OPGW Tension Single Dead-end Set |
| 1000 | OPGW Vibration Damper c/w pre-formed armour rods |
| 1001 | Down Lead Clamp |
| 1002 | Metallic joint box suitable for 96F OPGW alongwith splice kit for line and sub interface |
| 1003 | Loop bracket |
| 1004 | Supply of FODP |
| 1005 | FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails |
| 1006 | Installation hardware set for above 96 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room. |
| 1007 | Supply of Anti Fog Disc Insulator Stack |
| 1008 | Disc Insulator suitable for Quad ACSR Moose (400kV TL)-120 kN |
| 1009 | Disc Insulator suitable for Quad ACSR Moose (400kV TL)-160 kN |
| 1010 | Supply of HARDWARE FITTINGS |
| 1011 | Hardware fittings for Quad ACSR Moose Conductor- Double Suspension String (Pilot) 120x2 kN |
| 1012 | Hardware fittings suitable for Quad ACSR Moose Conductor- Quad Tension String 160x4 kN |
| 1013 | F&I of lattice-type galvanized (high-tensile steel and mild-steel) steel suspension towers, angle towers and special towers etc. complete with stubs, cleats, tower superstructures, step bolts, hangers and all associated accessories. The supply shall also include all types of galvanized iron (GI) nuts, bolts, washers, spring washers etc. required for tower assembly. All materials supplied shall conform to the relevant technical specifications and applicable standards stipulated in the tender documents. |
| 1014 | High Tensile Steel |
| 1015 | Mild Steel |
| 1016 | F&I of Tower Accessories |
| 1017 | Procurement of Danger plates. |
| 1018 | Procurement of Phase plates.(Set of Three) |
| 1019 | Procurement of Number plates. |
| 1020 | Procurement of anti climbing device |
| 1021 | Procurement of Circuit Plate |
| 1022 | Procurement of Bird Guard (Set of Six) |
| 1023 | Procurement of Bird Diverters as per CEA |
| 1024 | F&I of ACSR Conductor |
| 1025 | ACSR Moose conductor |
| 1026 | F&I of Power Conductor Accessories |
| 1027 | Stock bridge type Vibration Damper |
| 1028 | Mid Span Compression Joint for Conductor |
| 1029 | Repair Sleeve for Conductor |
| 1030 | Bundle Spacer suitable for Quad ACSR Moose |
| 1031 | Rigid Spacer for jumper suitable for Quad ACSR Moose |
| 1032 | F&I of Tower earthing Accessories |
| 1033 | 50 NB dia, 3 mtr long GI pipe electrode (driven) with test link |
| 1034 | 50x6 mm GS flat as required |
| 1035 | Counter Poise Earthing (Per Tower) |
| 1036 | Other earthing accessories like GS steel wires, lugs etc |
| 1037 | F&I of Fibre Optic Cables |
| 1038 | 96 Fibre (DWSM) OPGW fibre optic cable |
| 1039 | 96 Fibre Optic Approach Cable (DWSM96F) |
| 1040 | F&I of OPGW HARDWARE/FITTINGS AND TERMINATIONS |
| 1041 | OPGW Suspension Assembly |
| 1042 | OPGW double tension pass through assembly |
| 1043 | OPGW Double Tension Assembly for splicing location |
| 1044 | OPGW Tension Single Dead-end Set |
| 1045 | OPGW Vibration Damper c/w pre-formed armour rods |
| 1046 | Down Lead Clamp |
| 1047 | Metallic joint box suitable for 96F OPGW alongwith splice kit for line and sub interface |
| 1048 | Loop bracket |
| 1049 | F&I of FODP |
| 1050 | FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails |
| 1051 | Installation hardware set for above 96 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room. |
| 1052 | F&I of Anti Fog Disc Insulator Stack |
| 1053 | Disc Insulator suitable for Quad ACSR Moose (400kV TL)-120 kN |
| 1054 | Disc Insulator suitable for Quad ACSR Moose (400kV TL)-160 kN |
| 1055 | F&I of HARDWARE FITTINGS |
| 1056 | Hardware fittings for Quad ACSR Moose Conductor- Double Suspension String (Pilot) 120x2 kN |
| 1057 | Hardware fittings suitable for Quad ACSR Moose Conductor- Quad Tension String 160x4 kN |
| 1058 | Survey as per Specification |
| 1059 | Detail Survey |
| 1060 | Check Survey |
| 1061 | Concreting of foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel. |
| 1062 | DD+3 (2Nos.) |
| 1063 | DD+6 with Auxiliary cross arm (2Nos.) |
| 1064 | Setting of Stubs |
| 1065 | Setting of Stubs using adjustable probe (1Set=1No. of Tower) |
| 1066 | Erection of following type tested lattice type galvanised steel suspension/Angle tower with stubs and cleats, different type of GI HT Nuts & Bolts, washers for the towers, hangers and all accessories, tower superstructure complete including step bolts, Welding of all nuts & bolts up to the bottom cross arm level including all charges of transportation, materials etc. |
| 1067 | DD+3 (2Nos.) |
| 1068 | DD+6 with Auxiliary cross arm (2Nos.) |
| 1069 | Installation/Fitting of Tower Accessories |
| 1070 | Fitting of Danger plates. |
| 1071 | Fitting of Phase plates.(Set of Three) |
| 1072 | Fitting of Number plates. |
| 1073 | Fitting of anti climbing device |
| 1074 | Fitting of Circuit Plate |
| 1075 | Fitting of Bird Guard (Set of Six) |
| 1076 | Fitting of Bird Diverters as per CEA |
| 1077 | Stringingof ACSR Conductor |
| 1078 | Stringing of power conductors including transportation from Stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km (Double circuit Tower for Quad Circuit Line) of line. |
| 1079 | Grounding of towers (Pipe earthing / counterpoise earthing) with 3 metre long 50 mm dia G I pipe along with 50x6 mm GS flat, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification including Soil Resistivity Testing |
| 1080 | DD+6 with Auxiliary cross arm |
| 1081 | Protection of Tower |
| 1082 | Protection of Tower |
| 1083 | Supply of following type tested lattice-type galvanized (high-tensile steel and mild-steel) steel suspension towers, angle towers and special towers etc. complete with stubs, cleats, tower superstructures, step bolts, hangers and all associated accessories. The supply shall also include all types of galvanized iron (GI) nuts, bolts, washers, spring washers etc. required for tower assembly. All materials supplied shall conform to the relevant technical specifications and applicable standards stipulated in the tender documents. |
| 1084 | High Tensile Steel (DB+6) |
| 1085 | Mild Steel (DB+6) |
| 1086 | High Tensile Steel (DD+0) |
| 1087 | Mild Steel (DD+0) |
| 1088 | High Tensile Steel (DD+3) |
| 1089 | Mild Steel (DD+3) |
| 1090 | High Tensile Steel (DD+12) |
| 1091 | Mild Steel (DD+12) |
| 1092 | High Tensile Steel (220kV DD+12) |
| 1093 | Mild Steel (220kV DD+12) |
| 1094 | High Tensile Steel (220kV DD+18) |
| 1095 | Mild Steel (220kV DD+12) |
| 1096 | High Tensile Steel (132kV Crossing Gantry) |
| 1097 | Mild Steel (132kV Crossing Gantry) |
| 1098 | Supply of Tower Accessories |
| 1099 | Procurement of Danger plates. |
| 1100 | Procurement of Phase plates.(Set of Three) |
| 1101 | Procurement of Number plates. |
| 1102 | Procurement of anti climbing device |
| 1103 | Procurement of Circuit Plate |
| 1104 | Procurement of Bird Guard (Set of Six) |
| 1105 | Procurement of Bird Diverters as per CEA |
| 1106 | Supply of AAAC Conductor |
| 1107 | AAAC Panthar conductor |
| 1108 | Supply of Power Conductor Accessories |
| 1109 | Stock bridge type Vibration Damper |
| 1110 | Mid Span Compression Joint for Conductor |
| 1111 | Repair Sleeve for Conductor |
| 1112 | Supply of Tower earthing Accessories |
| 1113 | 50 NB dia, 3 mtr long GI pipe electrode (driven) with test link |
| 1114 | 50x6 mm GS flat as required |
| 1115 | Counter Poise Earthing (per Tower) |
| 1116 | Other earthing accessories like GS steel wires, lugs etc |
| 1117 | Supply of Fibre Optic Cables |
| 1118 | 48 Fibre (DWSM) OPGW fibre optic cable |
| 1119 | 48 Fibre Optic Approach Cable (DWSM96F) |
| 1120 | Supply of OPGW HARDWARE/FITTINGS AND TERMINATIONS |
| 1121 | OPGW Suspension Assembly |
| 1122 | OPGW double tension pass through assembly |
| 1123 | OPGW Double Tension Assembly for splicing location |
| 1124 | OPGW Tension Single Dead-end Set |
| 1125 | OPGW Vibration Damper c/w pre-formed armour rods |
| 1126 | Down Lead Clamp |
| 1127 | Metallic joint box suitable for 48F OPGW alongwith splice kit for line and sub interface |
| 1128 | Loop bracket |
| 1129 | Supply of FODP |
| 1130 | FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails |
| 1131 | Installation hardware set for above 96 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room. |
| 1132 | Supply of Anti Fog Disc Insulator Stack |
| 1133 | Disc insulator suitable for Single AAAC Panther (132 KV TL)-70 KN |
| 1134 | Disc insulator suitable for Single AAAC Panther (132 KV TL)-90 KN |
| 1135 | Supply of HARDWARE FITTINGS |
| 1136 | Hardware fittings for Single AAAC Panther Conductor-Single Suspension String 70 kN (Pilot) |
| 1137 | Hardware fittings suitable for Single AAAC Panther Conductor-Double Tension String 2x90 kN |
| 1138 | Hardware fittings suitable for Single AAAC Panther Conductor-Single Tension String 90 kN |
| 1139 | F&I of following type tested lattice-type galvanized (high-tensile steel and mild-steel) steel suspension towers, angle towers and special towers etc. complete with stubs, cleats, tower superstructures, step bolts, hangers and all associated accessories. The supply shall also include all types of galvanized iron (GI) nuts, bolts, washers, spring washers etc. required for tower assembly. All materials supplied shall conform to the relevant technical specifications and applicable standards stipulated in the tender documents. |
| 1140 | High Tensile Steel (DB+6) |
| 1141 | Mild Steel (DB+6) |
| 1142 | High Tensile Steel (DD+0) |
| 1143 | Mild Steel (DD+0) |
| 1144 | High Tensile Steel (DD+3) |
| 1145 | Mild Steel (DD+3) |
| 1146 | High Tensile Steel (DD+12) |
| 1147 | Mild Steel (DD+12) |
| 1148 | High Tensile Steel (220kV DD+12) |
| 1149 | Mild Steel (220kV DD+12) |
| 1150 | High Tensile Steel (220kV DD+18) |
| 1151 | Mild Steel (220kV DD+12) |
| 1152 | High Tensile Steel (132kV Crossing Gantry) |
| 1153 | Mild Steel (132kV Crossing Gantry) |
| 1154 | F&I of Tower Accessories |
| 1155 | Procurement of Danger plates. |
| 1156 | Procurement of Phase plates.(Set of Three) |
| 1157 | Procurement of Number plates. |
| 1158 | Procurement of anti climbing device |
| 1159 | Procurement of Circuit Plate |
| 1160 | Procurement of Bird Guard (Set of Six) |
| 1161 | Procurement of Bird Diverters as per CEA |
| 1162 | F&I of AAAC Conductor |
| 1163 | AAAC Panthar conductor |
| 1164 | F&I of Power Conductor Accessories |
| 1165 | Stock bridge type Vibration Damper |
| 1166 | Mid Span Compression Joint for Conductor |
| 1167 | Repair Sleeve for Conductor |
| 1168 | F&I of Tower earthing Accessories |
| 1169 | 50 NB dia, 3 mtr long GI pipe electrode (driven) with test link |
| 1170 | 50x6 mm GS flat as required |
| 1171 | Counter Poise Earthing (per Tower) |
| 1172 | Other earthing accessories like GS steel wires, lugs etc |
| 1173 | F&I of Fibre Optic Cables |
| 1174 | 48 Fibre (DWSM) OPGW fibre optic cable |
| 1175 | 48 Fibre Optic Approach Cable (DWSM96F) |
| 1176 | F&I of OPGW HARDWARE/FITTINGS AND TERMINATIONS |
| 1177 | OPGW Suspension Assembly |
| 1178 | OPGW double tension pass through assembly |
| 1179 | OPGW Double Tension Assembly for splicing location |
| 1180 | OPGW Tension Single Dead-end Set |
| 1181 | OPGW Vibration Damper c/w pre-formed armour rods |
| 1182 | Down Lead Clamp |
| 1183 | Metallic joint box suitable for 48F OPGW alongwith splice kit for line and sub interface |
| 1184 | Loop bracket |
| 1185 | F&I of FODP |
| 1186 | FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails |
| 1187 | Installation hardware set for above 96 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room. |
| 1188 | F&I of Anti Fog Disc Insulator Stack |
| 1189 | Disc insulator suitable for Single AAAC Panther (132 KV TL)-70 KN |
| 1190 | Disc insulator suitable for Single AAAC Panther (132 KV TL)-90 KN |
| 1191 | F&I of HARDWARE FITTINGS |
| 1192 | Hardware fittings for Single AAAC Panther Conductor-Single Suspension String 70 kN (Pilot) |
| 1193 | Hardware fittings suitable for Single AAAC Panther Conductor-Double Tension String 2x90 kN |
| 1194 | Hardware fittings suitable for Single AAAC Panther Conductor-Single Tension String 90 kN |
| 1195 | Survey as per Specification |
| 1196 | Detail Survey |
| 1197 | Check Survey |
| 1198 | Concreting of foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel. |
| 1199 | DD+12 |
| 1200 | 220kV DD+12 |
| 1201 | 220kV DD+18 |
| 1202 | 132kV Crossing Gantry |
| 1203 | Setting of Stubs |
| 1204 | Setting of Stubs using adjustable probe (1Set=1No. of Tower/Gantry) |
| 1205 | Erection of following type tested lattice type galvanised steel suspension/Angle tower/Special Tower with stubs and cleats, different type of GI HT Nuts & Bolts, washers for the towers, hangers and all accessories, tower superstructure complete including step bolts, Welding of all nuts & bolts up to the bottom cross arm level including all charges of transportation, materials etc. |
| 1206 | DD+12 |
| 1207 | 220kV DD+12 |
| 1208 | 220kV DD+18 |
| 1209 | 132kV Crossing Gantry |
| 1210 | Installation/Fitting of Tower Accessories |
| 1211 | Fitting of Danger plates. |
| 1212 | Fitting of Phase plates.(Set of Three) |
| 1213 | Fitting of Number plates. |
| 1214 | Fitting of anti climbing device |
| 1215 | Fitting of Circuit Plate |
| 1216 | Fitting of Bird Guard (Set of Six) |
| 1217 | Fitting of Bird Diverters as per CEA |
| 1218 | Stringingof ACSR Conductor |
| 1219 | Stringing of power conductors including transportation from Stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km (6 conductors for Double Circuit Line) of line. |
| 1220 | Grounding of towers (Pipe earthing / counterpoise earthing) with 3 metre long 50 mm dia G I pipe along with 50x6 mm GS flat, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification including Soil Resistivity Testing |
| 1221 | Grounding of towers (Pipe earthing / counterpoise earthing) with 3 metre long 50 mm dia G I pipe along with 50x6 mm GS flat, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification including Soil Resistivity Testing |
| 1222 | Protection of Tower Please Enable Macros to View BoQ information |
| 1223 | Protection of Tower Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 16 daysNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender