Tender For annual repair & maintenance of Buildings Under Bm-I Division During 2026-27. Sh: Repair And Maintenance Of Pumps And Electric Accessories Under The Jurisdiction Of Jaffery Square Service Centre, Bm-I Division.
Tender Value
6.07 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
5 days left
EMD
12154
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Buildings Under Bm-I Division During 2026-27. Sh: Repair And Maintenance Of Pumps And Electric Accessories Under The Jurisdiction Of Jaffery Square Service Centre, Bm-I Division.
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding of AC motor monoblock pump set of the required capacity with superior copper wire of appropriate sizes including testing etc. complete as required with following specification, 3 phase 2800 to 2900 RPM 400/400 volts. 3 HP to 5 HP pump set |
| 2 | Repairing and rewinding of 7.5 to 10HP submersible pump set 3 phase 440 volt 2800 rpm with required size copper winding wire including replacement of following defective parts , Rotter sleeve stainless -2 nos , bearing bush (gun metal )-2 nos, Thrust counter -1 nos ,Wearing-1 nos.,Cable grommet -1 no.,Impellar repairing and balancing-1 no., Mercury seal-1 o.,Repairing /overhauling and painting of pump set ,Check nut -1 no.etc complete in all respect as per entire satisfaction of Engineer-in-charge. |
| 3 | Lifting and taking out upto 15HP clear water submersible pumpset from existing under ground tank/ tube well etc with the help of chain pulley and tripod stand including disconnection of suction and delivery pipe line and electric connection ets as required as per direction and to the entire satisfaction of Engineer-in-charge. |
| 4 | Installation/Lowering of clear water submersible pump set upto 15 HP pump set capacity in the existing under ground water tankk/ tube well with the help of chain pulley tripod stand including connection of delivery pipe line, electric cable of outgoing and incoming cable testing etc. complete in all respect as per direction and entire satisfaction of Engineer-in-charge. |
| 5 | Providing and fixing ampere metre 96mm square type upto 0.30 ampere of make AE (Automatic Electric) siemen or Havels etc. complete as per the direction of Engineer-in-charge. |
| 6 | Providing and fixing volt meter 96mm square type upto 0 to 500 volts of make AE (Automatic Electric) Siemen or Havels etc. complete as per the direction of the Engineer-in-charge.. |
| 7 | Providing and fixing 32 ampere Triple Pole Neutral (TPN) suitable for motor and other inductive loads ‘C’ series MCB conforming to IS:8826:MCB Amp. Triple pole with nuts of standard and BC 998-1995. 10 KA old and fixing the new MCB as per the direction of Engineer-in-charge. |
| 8 | Providing and fixing cast iron impeller suitable for the following mono block pump set 3.00 HP to 5.00 motor pump set |
| 9 | Supplying and fixing ball bearing SKF/NBC in existing motor pump set including greasing, cleaning and set in position (main and end bearing) 3.00 HP TO 5.00 HP Motor pump set |
| 10 | Providing and fixing single phasing preventer of approved make L&T Siemen etc. suitable up to 7.5 HP mono block pump set |
| 11 | Providing and fixing spare part for direct on line (SDFA) star delta fully automatic starter L&T and cuttler, hammer, model, make and equivalent make(i) Spare kit without Coil (Silver point) |
| 12 | (ii) Over load relay |
| 13 | (iii) No Volt Coil 380.50 Hz |
| 14 | Providing and fixing gun metal sleeve (Graphited Cotton) of required size in pump set including gland dori Gun metal sleeve 3HP to 5HP pump set |
| 15 | Dismantling and installation of pump set at site after repairing the same including cartage of motor to the work shop and back at site |
| 16 | Providing and fixing rubber gas kit one set of approved quality in pump set suction and delivery etc. complete |
| 17 | Providing 40 Amp. TPN suitable for motor and other induction load-o-series conforming to IS:8328-1996 EI 898-1995 breaking capacity MC no. 40 TPN/BCB 40 Ampere of havells make including dismantling old and fixing the new wiring and testing etc. Complete as per direction of Engineer-in-charge. |
| 18 | Providing and fixing two cover CMS sheet guard of kirloskar make pump as per entire satisfaction of Engineer-incharge. 3.00 HP to 7.5 HP motor pump set |
| 19 | Providing and fixing electric fan of following pump set 3.00HP to 5.00 HP motor pump set |
| 20 | Providing and fixing water defector rubber seal ring 3.00HP to 7.5 HP motor pump set |
| 21 | Welding turning and alignment of roller shaft as per direction of Engineer-in-charge. |
| 22 | Providing and fixing M.S Flange of 50mm dia pipe with nut bolts rubber packing cartage labour charge etc. complete as per direction of engineer-in-charge |
| 23 | Providing and fixing PVC insulated copper wire etc complete. |
| 24 | Providing and fixing stud and nuts including making threading in the body of pump 12×45mm as per direction of Engineer-in-charge. |
| 25 | Providing and fixing moulded case circuit breaker (Three Pole Series) DM 100 min 80-100 Hz of thermal release range 10 KA breaking capacity at 415V-50 Hz (Cat No. SL 979870000). |
| 26 | Providing and fixing monoblock Pump set with the following specifications :-5 HP Monoblock Pump having Flow Motor Power 3.7 kW, Power : 415 V, 50 Hz, AC Supply, Three Phase,Head Range : 6 to 38 Meter ,Discharge Rate : 11 to 23 LPS), Protection IP 44,Insulation B Class,Pipe Size (Suction x Delivery) : 65 x 50 mm of make of pump preferably be of Kirlosker, Crompton or equivalemnt make as per direction of Engineer-in-charge. |
| 27 | Purchase and taken away the dismanled material from the site.Dismnatled 5HP monoblock unserviceable motor pump |
| 28 | Providing and fixing Horizontal Openwell Submersible Pump set with the following specifications :- Horizontal Openwell Submersible Pump, Phase Three Phase, Voltage 415 V, Power 7.5 HP, Frequency 50 Hz, Discharge Range 9.5-20.2 LPS, Head Range 33-55 m, Winding copper, Suc x Del (mm) 65x50 mm, Angle Horizontal, Product Sub Type Horizontal Openwell Submersible Pump, Power Rating 5.5 kW, Speed (RPM) 2920 of make of pump preferably be of Kirlosker, Crompton or equivalemnt make as per direction of Engineer-in-charge. |
| 29 | Purchase and taken away the dismanled material from the site . Dismnatled 7.5HP monoblock unserviceable motor pump |
| 30 | Visiting charges of electrician for making required installation of pump or other trouble checking in pump and starter etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender