Tender For Providing And Installation Of Hand Pump India Mark-Iii (65 Mm Dia) India Mark-Ii (32 Mm Dia) At Sub Division Fatehpur In Tehsil Fatehpur Distt. Kangra Hp (Sh:-Drilling By Handpump With Dth/ Odex/ Percussion/ Calyx/ Portable Rings
Tender Value
3.58 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
5 days left
EMD
7172
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Hand Pump India Mark-Iii (65 Mm Dia) India Mark-Ii (32 Mm Dia) At Sub Division Fatehpur In Tehsil Fatehpur Distt. Kangra Hp (Sh:-Drilling By Handpump With Dth/ Odex/ Percussion/ Calyx/ Portable Rings
BOQ
| Sl. No. | Item Description |
| 1 | Providing and installation of India Mark III(65mm) and India mark II(32mm) extra deep (32mm) deep bore hand pumps as per IS 13056-1991 alongwith its upto date amendments and IS:9301 respectively comprising of following items, transporation of suitable Truck /Tractor mounted rig where road available or with Portable rig where road availabe or with Portable rig where road not available with DTH/ODEX/Percussion/Calyx/Rotary method alongwith necessary accessories etc. to the site of work and erection including leveling of site etc. complete in all respect as per the direction of Engineer in Charge. |
| 2 | Drilling bores of 152mm dia as per IS : 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata conglomerate boulders pebbles gravels silt clay etc including cost of attachments consumables stores bits water POL etc complete with system of simultaneous lowering of 125mm nominal bore 5mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia advani/oerlikon electrodes with one plain end the other end chamfered to 50 degree removing paint on the area to be welded inclusive of the cost of biodegradable and non toxic from flush etc complete in all respects as per directions of the Engineer in Charge MSERW fincut casing pipe ,casing pipe shoe and bit tube as per requirement of ODEX to be paid seprately. |
| 3 | Supplying and lowering of IS marked 125mm nominal bore 5mm thick fincut MSERW casing pipes as per IS 4270-2001 and requirement of ODEX attachment from approved manufactures complete in all respects as per the directions of the Engineer in Charge . |
| 4 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of Engineer in Charge . |
| 5 | Collection and preservation of soil samples in polythene bags complete in all respects as per directions of Engineer in Charge . |
| 6 | Development of bore well and yield testing with air compressor through V-Notch and disinfection etc complete in all respects as per IS 2800-1979 and as per directions of Engineer in Charge . |
| 7 | Supply of submersible pumping sets of KSB make conforming to latest relevant BIS .The pump should be fitted with free flow impellors alloy as per BIS -5659 -1978 with uptodate for clear water with shaft protection sleeve on pump shaft ensuring better efficiency conforming to BIS specification. The pump shall be directly coupled by intermediate casing and provided with stainless steel thrust bearing plant to withstand non vertical loads with minimum wear and tear .It is also should be fitted with a rubber device to make up expensing of water with heating of motor complete in all respect as per the direction and satisfactions of the Engineer in charge. |
| 8 | 2.00 HP Single phase |
| 9 | Discharge -1.50 LPS |
| 10 | Total Head = 90.00 to 110.00 mtr. |
| 11 | Supply and fixing of complete pannel board suitable for single phase Submersible motor including one capacitor ,2 poles ,Ampere Meter Voltmeter On/Off switch ,indicating lamps running and starting capacitor for suitable motor with M.S box type and wiring etc complete in all respect as per the direction and satisfactions of the Engineer in charge. |
| 12 | Supplying and fixing of PVC jointless double flat water proof cable 2.50 mm2 of finolex make as per BIS -694-1998 latest with uptodate ammendments suitable for the pump set offered from pannel board to motor including all electrical equipments /accessories such as thimbles flexible pipes nuts & bolts clips etc laid in pipe .The pipe size and make shall be subject to approval of HPSEB authority as per the direction and satisfactions of the Engineer in Charge . |
| 13 | Providing and jointing of PPR pipe SDR 7.40 /PN 16 ( three layers) assembly 40mm dia including providing fixing of sockets complete in all respects as per the direction and satisfaction of the Engineer in Charge . |
| 14 | Providing and fixing supporting clamps with nuts and volts to wear the weight of pump set and column assembly complete in all respect as per the satisfaction of the Engineer in Charge . |
| 15 | Providing and fixing M.S bore cap 125mm dia heavy class complete in all respect as per the direction and satisfaction of the Engineer in Charge. |
| 16 | Providing and fixing safety wire for clamping of cable from bore well to support the pumping machinery complete in all respect as per the direction and satisfaction of the Engineer in Charge . |
| 17 | Providing and fixing GI wire SWG -8 complete in all respect as per the direction and satisfactions of the Engineer in Charge. |
| 18 | Providing and fixing GI wire SWG -8 complete in all respect as per the direction and satisfactions of the Engineer in Charge. |
| 19 | Providing and fixing of adopter for handpumps. |
| 20 | Providing and fixing of GI pipe . |
| 21 | Providing and fixing of Sluice valve & Unions . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender