Tender For Construction of Stage At Govt. Senior Secondary School Rohru-2 Dashanli Tehsil Rohru Distt Shimla H.P Sh:- Construction of Stage ,Green Room ,Toilets
Tender Value
19.21 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
0 days left
EMD
41000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Stage At Govt. Senior Secondary School Rohru-2 Dashanli Tehsil Rohru Distt Shimla H.P Sh:- Construction of Stage ,Green Room ,Toilets
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc, in earth work, lift up to 1.50mtrs stacking the excavated soil not more then 3 mtr clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required in to plinths side of foundations etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavatedearth as directed with in a lead of 20 mtrs. |
| 2 | Providing and laying Cement Concrete 1:6:12 (1Cement:6Sand:12Graded Stone aggregate 40 MM Nominal Size)and curring complete excluding complete excluding cost of form work in foundation and plinth. |
| 3 | Providing from work with steel plates 3.15 mm thick welded with angel iron in frame 30X30X5mm so as to give a fair finish including centering shuttering strutting propping and centring below suporting floor to ceiling not exceeding 4mtrs.and removal of the same for instu-reinforced conc.and plain concrete in a) Foundations footings basis of columns etc. and mass concrete including all leads and lifts, as per HPPWD, specification of 1990 volume-I as directed by the Engineer-In-Charge. |
| 4 | Providing from work with steel plates 3.15 mm thick welded with angel iron in frame 30X30X5mm so as to give a fair finish including centering shuttering strutting propping and centring below suporting floor to ceiling not exceeding 4mtrs.and removal of the same for instu-reinforced conc.and plain concrete in :-Flat surfaces such as soffits of suspended,roofs,landings and the like.Floor etc up to 200mm in thickness. |
| 5 | Providing from work with steel plates 3.15 mm thick welded with angel iron in frame 30X30X5mm so as to give a fair finish including centering shuttering strutting propping and centring below suporting floor to ceiling not exceeding 4mtrs.and removal of the same for instu-reinforced conc.and plain concrete in :-Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 meter in depth in all heights from floor.Sides,Soffits,Beam,haunchings,cantilevers,bressumers etc |
| 6 | Providing from work with steel plates 3.15 mm thick welded with angel iron in frame 30X30X5mm so as to give a fair finish including centering shuttering strutting propping and centring below suporting floor to ceiling not exceeding 4mtrs.and removal of the same for instu-reinforced conc.and plain concrete in :-edges of slabs and breaks in floors and walls:-under 20cm wide |
| 7 | Providing and laying Cement Concrete 1:1.5:3 (1Cement:1.5Sand:3Graded Stone aggregate 20 MM Nominal Size)and curring complete excluding cost of form work and reinforcement in reinforced concrete in Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level. |
| 8 | Providing mild steel tor steel etr. for rcc work including bending binding and placing in position complete etc. |
| 9 | Brick work using common burnt clay building bricks in cement mortar 1:6 (1cement:6sand) in foundation and plinth II nd class bricks. |
| 10 | Half Brick masonry usinbg common burent clay building bricks in cement m,ortar 1:4 ( 1 cment :4 sand ). 2ND Class bricks |
| 11 | Stone soling properly hand-packed filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour) |
| 12 | Cement concrete flooring 1:2:4 cement: 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat. |
| 13 | Providing and laying spartio ceramic tiles 5.5mm thick in flooring (300 x300mm. size)treads-of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. |
| 14 | Providing wood work in frames of doors windows clearstorey window etc. |
| 15 | Providing and fixing panellewd glazed panelled or glazed shutter for door and window cleastorey window etc.2nd class d/wood |
| 16 | Providing and fixing wire gauge shutters using galvanized M.S gauge of I.S gauge designation 85G with wire of dia 0.55mm for door windows and clerestory windows including bright finished/black enameled iron hinges with necessary screws (i) 40mm thick, second class deodar wood within all leads and lifts. |
| 17 | Providing and fixing M.S. grills of require pattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. |
| 18 | Providing and laying granite stone in flooring 20mm(average)thickness base ofcementmortar1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. |
| 19 | 15mm cement plaster in single coat on fair side ofbrick/concrete/stone walls forinterior plastering uptofloortwo level includingarises,internal roundedangles,chamfers and/or roundedangles not exceeding 80mm ingirth and finished even andsmooth. |
| 20 | 6mm thick plaster to ceiling in cement mortar 1:3(1cement :3 sand) |
| 21 | White glazed glossy tiles 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3 (1cement: 3sand) and jointed with cement slurry as per specification including all leads and lifts, as per HP PWD, specification of 1990 Volume-I, as directed by the Engineer-in-Charge |
| 22 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 23 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. |
| 24 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease, dirt and other foreign matter sand papering and knotting (a) Ready mixed paint brushing wood primer pink including all leads and lifts, as per HP:PWD, specification of 1990 Volume-I, as directed by the Engineer-in-Charge |
| 25 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping including carriage within all leads, lifts of materials and other incidentals:- with enamel paint other than white. |
| 26 | Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) |
| 27 | Fixing of anodized aluminium sliding door bolty anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete 300x16mm or 250x16mm |
| 28 | Fixing of tower bolt (barrel type anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete 300x10mm or 250x10mm |
| 29 | Fixing of handlesanodized transparent or dyed to required colour and shade with bolts and screws etc. complete 125,100or75mm |
| 30 | Providing corrugated G.I sheet roofing with galvanized iron J or L hooks boltd and nuts 8mm diameters with bitumen and G.I limpet washers filled with white lead completed excluding the cost of purlins, rafters and trusses(i) 0.63mm thick sheet including all leads and lifts, as per HPPWD, spec ification of 1990 Volume-i, as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender