Tender For Construction of Veterinary Hospital At ,Pujarli-4 (Sh:Civil Work Including Ws&Si, Rain Harvesting Tank,Septic Tank Etc.)
Tender Value
65.95 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
2 days left
EMD
1.32 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Veterinary Hospital At ,Pujarli-4 (Sh:Civil Work Including Ws&Si, Rain Harvesting Tank,Septic Tank Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un- useful material and transportation of the un -useful material for disposing at dumping site (to be arranged by the contractor) to the satisfaction of Engineer- in -Charge through all modes of transportation including head load, animal load or mechanical means along with its levelling fine dressing and with all kinds of labour ,machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones shingles aggregates and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used / removed per the direction of engineer in charge. any loss to the public and private property during the course of excavation and disposal of servicable and unservicable material shall be the absolute rtesponsibilty of the contractor and shall have to be duly compensated by him in all respects R/Wall and B/wall. |
| 2 | P/l cement concrete 1:6:12 ( 1cement: 6sand: 12 graded stone agg 40 mm nominal size and curing complete excluding the cost of form work in plinth and foundation |
| 3 | Filling in plinth with sand under floors including watering, ramming consolidatingand dreesing complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 4 | Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtr.(Four metre) and removal of the same for insitu-reinforced concrete and plain concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (a). Foundations, footings & bases of columns etc., and mass concrete. |
| 5 | (d). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor. |
| 6 | (c). Column, pillars, posts and struts. (i). Square, rectangular or polygonal in plan. |
| 7 | (b).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness. |
| 8 | ( e) Edges of slabs and breaks in floors and walls: under 20 cm (Twenty centimetre) wide. |
| 9 | (f). Stair cases with slopping or stepped soffits excluding landing |
| 10 | Providing and laying M-20 grade of cement concrete mechanically mixed and vibrated with minimum cement content 300Kg./Cum. with crushed stone aggregate 20mm nominal size and curing complete excluding cost of rorm work and reinforcement for reinforced concrete work in within all leads and lifts as per directions of Engineer in charges. Foundation footing, basis of columns and the like and mass concrete.. within all leads and lifts as per directions of Engineer in charges |
| 11 | Suspended floor, roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor two level within all leads and lifts as per directions of Engineer in charges i) upto all floor level |
| 12 | Stair cases (Except spiral stair cases) excluding landing but including preparing of the surface and finising of nosing (i) upto all floor level within all leads and lifts as per directions of Engineer in charge |
| 13 | Columns, pillars, posts and struts (i) upto all floor level.. |
| 14 | Providing Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto all floor level.. With in all leads and lifts as per directions of Engineer in charge |
| 15 | Second class Brick work using common burnt clay building bricks with rat trap bound in super structure in cement mortar 1:6 (1 cement : 6 sand) in all leads and lifts as per directions of Engineer in charges i) upto all floor level |
| 16 | Half brick masonry in common burnt clay building bricks in super structure in cement mortar 1:4 (1 cement : 4 sand) 2nd class brick (i) upto all floor level with in all leads and lifts as per directions of Engineer in charge |
| 17 | Providing wood work in frames of doors windows celerestory window and other frames wrought, framed and fixed in position etc 2nd class deodar wood |
| 18 | P/f 12 mm thick 150 mm wide pelment with 25 mm dia wooden curtain, rods and brackets in cluding fixing 25x3 mm M.S flat at 10 cm long and plugs etc complete. Ist class indian teak wood |
| 19 | P/F pannelled and glazed or panneled glaze shutters for door windows and celerestory window, i/c black enamelled iron butt hinges with necessary screws 40 mm thick |
| 20 | Providing and fixing steel wire guage shutter using galvainsed MS wire gauge of IS gauge desination 85kg with wire of dia 0.55mm for doors, windows and clearestory windows including bright finished black enameled iron hinges with neccesary screws 40mm thick 2nd class deodar wood with in all leads and lifts as per approved specification / design. |
| 21 | Provding and fixing M.S grills of required pattern in wooden frames of windows etc with M.S flats, square or round bars with round headed bolts and nuts or by screws plain grill. |
| 22 | P/F 19mm thick water proof termite resistant commercial board box including shelves & shutter the back side of cup board / cabinet shall be of 8mm thick ply and all the cut portions of shelves shall be finished with 6mm thick hard wood edging. The cut portion of shutters from outside shall be finished with 1mm thick lamination of approved shade i/c hinges & all accessories etc. complete as per detailed architectural drawing pertaining to job no. 195/2 to 199/1 with in all leads and lifts as per directions of Engineer in charge |
| 23 | Providing and fixing 19mm thick Commercial Board water proof shutters with hard wood edging and PGI sheet lining in inside of shutter of approved size i/c bright finished iron butt hinges etc; complete as per architectural designs/ drawings for this work with in all leads and lifts as per directions of Engineer in charge |
| 24 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 25 | Providing and fixing bright finished brasstower bolts (Berrel type) with screws etc complete200×10mm |
| 26 | Providing and fixing bright finished brass handles with necessary screws etc. complete within all leads and lifts as per directions of Engineer in charges 100mm |
| 27 | Providing and fixing bright finished brass casement stays(straight peg type) with necessary screw etc complete (250 mm, not less then 0.28 kg) |
| 28 | P/F bright finished brass 100mm. Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality) |
| 29 | Stone soling properly hand-packed filling interstices with spalls and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 150 mm spread thickness (finished work including materials and labour) |
| 30 | P/l cement concrete 1:4:8 ( 1cement: 4sand: 8 graded stone agg 40 mm nominal size and curing complete excluding the cost of form work in plinth and foundation |
| 31 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. |
| 32 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 33 | P/f Kota stone slab flooring base of cement mortar 1:4 ( 1 cemen: 4sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, i/c rubbing and polishing complete (25 mm thick) |
| 34 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 35 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 36 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 37 | Providing and fixing 0.60mm th. Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheetwith top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete all accesories as required as per the direction of Engineer- IN- Charge |
| 38 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating + back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted G.I. limpet and bitumen washers complete with all accesories as required as per the direction of Engineer- IN- Charge . |
| 39 | P/f 15cm wide 45 cm. overall semicircular plain G.I sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. i/c making necessary connections with rain water pipe complete as per design ( 0.80 mm thick) |
| 40 | P/f on wall face PVC (D-Plast) rain water pipes working pressure not less than 4.5 kg/sqm i/c filling the joints with approved adhesive complete. 150 mm dia |
| 41 | Providing and fixing on walls face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete. 150 mm dia PVC plain bend |
| 42 | 150 mm dia PVC shoe |
| 43 | P/F M.S.Holder bat clamps of approved design to C.I or S.C.I pipe i/c cement concrete block 10×10×10 cms of 1:2:4 (1cement : 2sand : 4graded stone aggregate 40mm nominal size) and cost of cutting holes and making good the walls accessories for 150mm dia meter with in all leads and lifts as per satisfaction of engineer in charge. |
| 44 | Providing and fixing M.S. BP Sheet 2.00 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 45 | Steel work welded in built up sections, trusses and framed work including cutting, hosisting fxing in position and applying a priming coat of red lead paint within all leads and lifts as per directions of Engineer in charges in beams joists channel, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters, purlins connected to common rafters and the like |
| 46 | Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely including carriage of materials within all leads and lifts :-. |
| 47 | Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter scoured with wire brushes fine steel wool scrapers and sand paper complete. Ready mixed priming paint brushing ref lead within all lead |
| 48 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 49 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 50 | Painting two coats (excluding priming coat) on new wood and wood bassed surfaces with ready mixed paint to give an even shade including cleaning the surface of all dirt, dust and other foregin matters sand papering and stoping with ready mixed paint other than white. |
| 51 | 6mm thick cement plaster to ceiling with cement mortar 1:4 (1cement : 4sand) within all leads and lifts as per satisfaction of Engineer in charges . |
| 52 | P/f Unistone 12 mm thick cladding on RCC surfaceside as on face of arch masonary wall etc on 12 mm cement plaster 1:3 ( 1cement: 3sand) and jointed with cement slurry i/c scaffolding etc complete. |
| 53 | 15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement : 6sand) within all leads and lifts as per satisfaction of Engineer in charges . |
| 54 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement : 6sand) within all leads and lifts as per satisfaction of Engineer in charges . |
| 55 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 56 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth within all leads and lifts as per satisfaction of Engineer in charges . |
| 57 | Providing plinth protection 50mm thick with cement concrete 1:3:6 (1cement : 3sand : 6graded stone aggregate 20mm nominal size) |
| 58 | Provding under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparetion of ground. |
| 59 | Constructing coursed rubble hammer dressed U-Shape open surface drain with side wall 15x22cm with cement mortar 1:6 (1cement : 6sand) and inside plastering with cement mortar 1:3 (1cement : 3sand) including earth work and laying 10cm cement concrete 1:5:10 (1cement : 5sand : 10graded stone aggregate 40mm nominal size) and 7.5cm cement concrete 1:2:4 (1 cement :2 sand :4 graded stone aggregate of 20mm nominal size and finished with a floating coat of neat cement complate as per standard design. |
| 60 | Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately 25mm nominal size within all leads and lifts as per satisfaction of Engineer in charges |
| 61 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes ( medium grades) tube fitting and clamps including making good the wall ceiling floor within all leads and lifts as per satisfaction of Engineer in charges. |
| 62 | Making connection of galvanised ms tube distribution branch with galvanised MS tube 20mm to 40mm nominal size by providing and fixing tee i/c cutting & threading etc. within all leads and lifts as per satisfaction of Engineer in charges |
| 63 | Providing and fixing PVC water tank of ISI:-12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level. ( make SINTEX having capacity of 1000 liters ) |
| 64 | P/f water meter stop cock in GMS tube /c necessary fitting such as mild steel galvanised jam nut. Sockets etc. complete cutting and making long screws ( water meter and stop cock to measured and paid for separately) 25 mm nominal bore |
| 65 | Constructio of chamber 300×300×500 inside size for stop cock with C.I. surface box 100×100×75 mm ( INSIDE) with hinged cover fixed in cement conc. Slab 1:2:4 mix.( 1 cement:2 sand: 4 graded stone aggregate 20 mm nomonal size) 75 mm thickness. Foundation concrete 1:5:10 (1 cement:5 sand:10 graded stone aggregate 40 mm nomonal size) and inside plastering with c.m. 1:3 finished with floating coat of neat cement and i/c curing complete. with 200 mm thick wall of brick masonary in cement mortar 1:3(1 cement: 3 sand) |
| 66 | Providing and fixing Plytheline-Aluminium-Polyehuylene (PE-AL-PE) composite pressure pipe U-V stabilized with carbon black conforming to IS-15450-2004 water supply including clamp at onemeter spacing cutting fixing and making good the wall etc. including carriage of material in all leads and lifts. 15 mm nominal bore:-1216 |
| 67 | Providing and fixing composite end seal compression fittings as per IS-15450-2004 including carriage of materials in all leads and lifts Equal Tees 1216 |
| 68 | educing Tees 1620 × all branches |
| 69 | Female branch Tee 1216×1216×15 mm thread |
| 70 | Female elbows 1216×15 mm thread |
| 71 | Male thread cinnector 1216×15 mm thread |
| 72 | Female thread connector 1216×15 mm thtread |
| 73 | couplers 1216 |
| 74 | Reducer 1620×1216 |
| 75 | Providing and fixing 40x3 mm flat iron holdfast 40 cm. long i/c fixing to frame with 10mm dia bolts& nts and wooden plugs and embeding in cement concrete block 30x10x15 cm 1:3:6 ( 1cement: 3sand: 6graded stone aggregate 20 mm nominal size) |
| 76 | Providing and fixing PVC ISI marked floor trap of self cleaning design including fixing with approved adhesive coat of cutting and making good the wall anf floors including carriage of materials within all leads and lifts 110 mm × 90 mm |
| 77 | 110 mm × 75 mm |
| 78 | Providing and fixing High Pressure PVC spigot and socked, waste and ventilated pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 1) 110 mm dia |
| 79 | 75 mm dia |
| 80 | Providing and fixing PVC single equal branch withoval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 110 mm dia |
| 81 | 75 mm dia |
| 82 | Providing and fixing PVC door band with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 1 ) 110 mm dia |
| 83 | 75 mm dia |
| 84 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 1) 75 mm dia |
| 85 | 110 mm dia |
| 86 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 75 mm dia |
| 87 | 110 mm dia |
| 88 | Providing and fixing PVC double equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 75 mm dia |
| 89 | 110 mm dia |
| 90 | Providing and fixing PVC plain double equal branch ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 75 mm dia |
| 91 | 110 mm dia |
| 92 | Providing and fixing PVC cowl including carriage of materials within all leads and lifts:- 75 mm nominal diameter |
| 93 | 110 mm nominal diameter |
| 94 | Providing and fixing vitreous china wash down water closet ( European type W.C. pan/Indian type W.C. pan) with integral P or S trap if required, including jointing the trap with soil pipe in cement pipe in C.M. 1:1 ( 1 cement: 1 sand)(seat and cover to be measured and paid for seperately) Orissa pattern:-No 20004 size 580× 400 mm of CERA/HINDWARE. |
| 95 | Providing and fixing PTMT coloured/white high density polyethylene/poly propylene 10.00 liters capacity ( full flush ) European standard control low level flushing cistern, with a pair of C.I. Brackets, With fittings such as lead valve with polythene flot, with push botten, coupling for connection with complete with inlet,outlet and overflow pipes 40 mm dia C.P. flush bend etc. complete No. 2603 of CERA/HINDWARE |
| 96 | P/f stainless steel sink i/c all leads and lifts, as per HPPWD specs of 1990 V-1 as directed by the engineer in charge |
| 97 | Providing and Fixing Vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and macking good the same but excluding fittings FLATBACK category No 1025 No 1025 size 550x400 mm |
| 98 | Providing and fixing vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid for seperately ) of size 633x395x420 mm with automatic flushing systern with fitting complete RS or EI brackets painted white No. 5001 of CERA size 42x39x63 |
| 99 | Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings. |
| 100 | Providing and fixing flush pipe seperators for urinal with fittings such unions, clamp etc including holes in walls and making good the same complete 15 mm nominal bore |
| 101 | Providing and fixing Division plate for urinals 600x300 mm vitreous China with fitting complete category No. 61001 of CERA |
| 102 | Providing and fixing PVC 110 mm size 'P' or 'S' trap for water closet ( squatting pan ) including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 110 mm dia. |
| 103 | Providiing anf fixing C.P. Brass chain 50 cm long and rubber plug of following sizes for sink or wash basin 32 mm dia. |
| 104 | Providing and fixing M.I. Union for wash basin or sink including carriage of materials within all leads and lifts. 32 mm dia |
| 105 | Providing and fixing C.P. Brass S Trap for wash basin and sink 32 mm dia |
| 106 | Providing and fixing C.P. Bottle Trap for wash basin or sink including carriage of materials within all leads and lifts. 32 mm dia |
| 107 | Providing and fixing C.P. Brass waste for wash basin or sink including carriage of materials within all leads and lifts.32 mm dia |
| 108 | Providing and fixing 32 mm dia. PVC waste pipe for wash basin or sink including check nut including carriage of materials within all leads and lifts. |
| 109 | Providing and fixing 100 mm dia. C.P. grating including carriage of materials within all leads and lifts. |
| 110 | Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts. |
| 111 | Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts 600x20 mm |
| 112 | Providing and fixing 600 mm x 120 mm glass shelf with C.P. brass bracket and guard rail complete. |
| 113 | Providing and fixing C.P. brass toilet paper holder. |
| 114 | Providing and fixing C.P. brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws. |
| 115 | Providing and fixing C.P. brass bib tap with capstan head including carriage of materials within all leads and lifts:-15 mm dia |
| 116 | Providing and fixing C.P. brass pillar tap with capstan head including carriage of materials within all leads and lifts. 15 mm dia |
| 117 | Providing and fixing PVC connection pipe with brass union including carriage of materials within all leads and lifts:- 45 cm length 15 cm nominal bore |
| 118 | Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts:- 15 mm nominal bore:- |
| 119 | Providing and fixing water pump to lift rain water including carriage of materials within all leads and lifts:- |
| 120 | Constructio of manhole with R.C.C. top slab in 1:2:4 mix.( 1 cement:2 sand: 4 graded stone aggregate 20 mm nomonal size) . Foundation concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40 mm nomonal size) and inside plastering with 15 mm thickness with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing including carriage of materials within all leads and lifts inside size 800 mm x 800 mm and 500 mm deep including C.I. cover with frame ( Light duty single seal pattern-1 ) 455x 610 internal dimensions total weight of cover frame to be not less than 38 kg.( Weight of cover 23 kg and weight of frame 15 kg.) with 200 mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 ( 1 cement: 3 sand) |
| 121 | Providing and fixing cast iron cover 300x300 mm with frame for gully trap the weight of cover to be not less than 4.53 kg |
| 122 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches of drain (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottom upto 1.5 including getting out the excavated soil and disposal of surplus excavated soil as directed with in lead of 50m . |
| 123 | Centring and shuttering including strutting propping etc and removal of from for:- (i) Suspended floors, roofs , landings , balconies and access platform . |
| 124 | (ii) Vertical surface such as weell any thickness |
| 125 | (iii) Edges of slabs and break in floors and walls :-i)Under 20cm wide |
| 126 | Providing and laying cement concrete work 1:4:8 ( 1 cement :4 sand : 8 graded stone aggregate 20mm nominal size ) in all leads and lifts:- (i) Foundation and plinth |
| 127 | Providing and laying cement concrete work 1:1 1/2 :3 ( 1 cement : 1 1/2 sand :3 graded stone aggregate 20mm nominal size) in all leads and lifts:-(a) Suspended floors, roofs landing and shelves and their support, balconies , beams, girders, bressumers and cantilever. |
| 128 | (b)Vertical surface such as weell any thickness |
| 129 | Steel reinforcement for R.C.C work including straightening cutting, bending , placing in position and bindig all complete all complete above plinth leve (i) thermo-mechanically treated bars of grade i.Fe-500D or more including carriage of materials in all leads and lifts by machanical or manual means . |
| 130 | Brick work with common burnt clay half brick masonry F.P.S (Not modular) brick or class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in ; Cement mortar 1:4 (1cement : 4 coarse sand). |
| 131 | Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts – 40 mm thick (1) 40 mm thick. |
| 132 | 20 mm thick cement plaster of mix : (i) 1:4 (1 cement : 4 coarse sand ). |
| 133 | Suppling and fixing C.I manhole cover with frame 500mm internal dia weight and cover and frame should not be less then 58 km |
| 134 | Suppling and fixing C.I manhole cover with frame 450*610 mmweight of cover and frame should not be less then 38kg |
| 135 | supplying and filling broken/crushed aggregate chipping of hard stone 40 mm size |
| 136 | supplying and filling sand for disperstion trench as per didection of engineer in charge |
| 137 | Proving and fixing high pressure PVC spigot and socket waste and ventilating pipe 110 mm dia |
| 138 | Excavation in foundation trenches etc. in all kinds of earth work including Shade work , pick work , Jumper Work blasting work including where blasting is prohibited and chiselling /Wedging out of rock etc. upto all lifts stackiung the excavated soil not more than 3metres clear from the edge of the excavation and than returning the stacked soil in 15 cm , layer when required into plinths sides of foundation etc. consolidating each diposited layer by ramming and watering and then disposing of all surplus excavted earth within all leads and lifts directed by Engineer-In -Charge. |
| 139 | Excavation in drains and chnnel etc. in Earth work etc. in earth work including dressing of side and bed and dispossing of excavated earth upto a lead of 20 mtrs and lift upto 1.50mtrs. Dispossing earth to be levelled and neatly dressed pick work jumper work. |
| 140 | Providing from work with steel plates 3.15mm thi ck welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering hsuttering, strutting and Floor etc. upto 200mm in thicknesspropping etc. with wooden battens and ballies , height of proppping and centring below supporting floor to ceiling in all heights in all floors and removal of the same for in-situ reinforced concrete and plain concrete and plain concrete work in:- (i) Flat Surface such as soffits of suspended floors roofs landings and the like :- |
| 141 | (II) Edges of slabs and break in floors and walls :-Under 20 cm wide |
| 142 | Providing and laying cement concrete 1:4:8 ( 1 Cment : 3 Snad : 8 Graded stone aggregate 40mm nominal size ) and curing complete excluding cost of from work |
| 143 | Providing and laying cement concrete work 1:1 1/2 3 (1 cement : 1 1/2 Graded stone aggregateb 20mm nominal size mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of from work and reinforcement for reinforced concrete work (i) Suspended floor , roofs . Landing and shelves and their support balconies ,beams girders bressumers and cantilever. |
| 144 | Providing mild steel/Tor Steel reinforcement including cost of binding wire for R.C.C work including bending , binding and placing In position complete tor steel. |
| 145 | Second class brick work using common burnt clay building brick in foundation and plinth in cement mortar 1:4 ( 1 Cement : 4 Sand) :- |
| 146 | Cement concrete flooring 1:2:4 ( 1 Cement : : 2 Sand : 4 Graded stone aggregate 20mm nominal size ) laid in one layer finished with a floating coat of neat cement including carraige of material with in all leads and lifts :-50mm Thick |
| 147 | 20mm cement plaster in single coat on fair side of brick /Concrete / stone walls for interior plastring upto all floor level inlcuding arries . Internal rounded angles not exceeding 30cm in girth and finished even and smooth inlcuding In C.M 1:4 |
| 148 | Supplying and fixing C.I. Cover with frame 300x300 mm for gully trap ( standard pattern) the weight of cover to be not less than 4.53 kg |
| 149 | Supplying and fixing C.I cover with frame 450x610mm the weight of cover and frame not less than 38kg |
| 150 | Supplying and filling Brocken/crushed stone aggregate chippin ng of hard stone of 40 mm size |
| 151 | Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender