Tender For Misc Civil And Water Supply Work At Sripur Staff Quarter, Ghatal..
Tender Value
2.17 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
7 days left
EMD
4350
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc Civil And Water Supply Work At Sripur Staff Quarter, Ghatal..
BOQ
| Sl. No. | Item Description |
| 1 | BHARAT SANCHAR NIGAM LIMITED (A Govt. of India Enterprise) O/o Executive Engineer (C ) BSNL Civil Division-Kolkata. NIT No:-12/NIT/BSNL/CD-KOL/26-27 FINANCIAL BID Name of work: “Misc Civil and Water Supply work at Sripur Staff Quarter, Ghatal..” Name Of Bidder Sl. No Description of Items Qty Unit Rate Amount SH: FLOORING |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. (a) All kinds of soil 6.0 One Cubic Metre 0.0 |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (a) All kinds of soil (i) Pipes, cables etc, not exceeding 80 mm dia. 38.0 One Metre 0.0 |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 0.5 One Cubic Metre 0.0 |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 2.0 One Cubic Metre 0.0 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : (a) Foundations, footings, bases of columns, etc. for mass concrete 10.0 One Square Metre 0.0 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more. 50.0 One Kilogram 0.0 |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (a) Cement mortar 1:6 (1 cement : 6 coarse sand) 3.0 One Cubic Metre 0.0 |
| 10 | 12 mm cement plaster of mix : (a) 1:4 (1 cement: 4 fine sand) 15.0 One Square Metre 0.0 |
| 11 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (a) 15 mm to 40 mm nominal bore 6.0 One Running Metre 0.0 |
| 12 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : (a) 20 mm nominal bore. 6.0 Each 0.0 |
| 13 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 14 | Cutting holes up to 30x30 cm in walls including making good the same: (a) With common burnt clay F.P.S. (non modular) bricks. 2.0 Each 0.0 |
| 15 | Providing and fixing uPVC pipe fittings conforming to ASTM D - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part- I). a) Tank connector- 25 mm nominal dia 2.0 Each 0.0 b) Tank connector- 40 mm nominal dia 2.0 Each 0.0 c) Reducing Socket- 40x25 mm nominal dia 1.0 Each 0.0 d) Ball Valve- 25 mm nominal dia 3.0 Each 0.0 e) Non Return Valve- 25 mm nominal dia 1.0 Each 0.0 |
| 16 | Providing and fixing uPVC pipes (SCH 40 uPVC as per ASTM D-1785 pipes) including all uPVC plain and brass threaded fittings. Including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in charge. Internal work- Exposed on wall a) 25 mm nominal bore 70.0 Metre 0.0 b) 32 mm nominal bore 2.0 Metre 0.0 c) 40 mm nominal bore 2.0 Metre 0.0 |
| 17 | Providing and fixing 2mm thick Antistatic PVC Sheet (Conductive Roll) conforming to IS: 3462 laid true to the level after cleaning the surface completely free from the dust particles and fixing the rolls using rubber based adhesive of approved quality like Dunlop S-758 , Fevicol SR-998 or equivalent i/c rolling with light wooden roller about 5Kg all complete as directed by Engineer-in-Charge . |
| 18 | Providing and fixing copper strip of size 25mm X 0.5mm thick under the Antistatic PVC Flooring Sheet with necessary Metal Fastner Rivets , Screws etc. complete as per direction of Engineer - in - Charge . |
| 19 | Making one set of scaffolding only for replacing glass panels, painting,uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. upto 5.00 metre height as per direction of the Engineer-incharge. TOTAL Rs. 0.0 |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender