Tender For Carrying Out Waterproofing Treatment At Various Building/Shops At Aiesl Engineering Premises, Oap, Mumbai-400029
Tender Value
6.83 Crore
Estimated cost
Bid Submission
01 Dec 2026
11 days left
EMD
13.66 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Carrying Out Waterproofing Treatment At Various Building/Shops At Aiesl Engineering Premises, Oap, Mumbai-400029
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Work |
| 2 | Removing the existing APP membrane layer/ cement mortar/cement concrete etc and making the site clear as directed. |
| 3 | PU Waterproofing |
| 4 | Providing and applying 100% solid rapid setting single component PU waterproof coating, applied @1.8 kg/sq.mtr to form a DFT of 1.2-1.5 mm thickness. The system includes base preparation by mechanical cleaning, brushing and removal of flaky materials, grouting the porous area with cementitious grout, proper coving between slab and wall junctions and priming the surface with PU/Epoxy primer applied @ 150 gms/sq.mtr. The coating shall be continued to the entire horizontal area and should be terminated at 300mm above the FFL complete in all respect as per manufacturers specification. The waterproofing system should be applied as per manufacturers direction and methodology. |
| 5 | Expansion Joint Treatment |
| 6 | Preparing the surface on both edges of the expansion joint by making it clean, dry, and sound up to a width of 200mm; treating minor surface imperfections by repairing with polymer-modified mortar. Supply and installation of a backer rod of suitable diameter, firmly compressed into the expansion joint gap to the required depth. Applying a 1mm thick layer of well-mixed tape adhesive with 20mm width on both sides along the joint on the prepared substrate, followed by Seal Tape (1mm thick & 200mm wide). Covering and sealing the edges of the seal tape with Tape adhesive with 10-15mm width and a thickness of ~1mm, followed by the immediate removal of masking tape to ensure a neat finish. The treatment shall be completed by fixing a 1.5mm thick x 300mm wide aluminium cover sheet over the joint as a protective covering, secured with appropriate mechanical fasteners on one side to allow for movement. All materials to be of approved make. |
| 7 | Repair of Cracks |
| 8 | V Groove Treatment: Chasing and opening the joints/ cracks to form a V-shaped groove of appropriate size, thereafter, drilling along V groove at required spacing, fixing PVC nozzles and injecting non-shrink cementitious grout under pressure using a grout pump to fill pores. After grouting, cutting off the projecting nozzles and sealing with polymer-modified mortar. cleaning the surface and removing the loose particles with air blower, applying a bond coat of SBR Latex URP or equivalent and filling the V-groove using SBR Latex polymer modified mortar in a ratio 1:3 (1 cement: 3 sand) URP @ 10% weight of cement). All materials to be of approved make. |
| 9 | IPS Flooring |
| 10 | Providing and laying cement concrete floor (Indian Patent Stone) 40 mm to 65 mm thick to maintain required slope, P.C.C. (1:2:4) mix using 12.5 mm graded stone aggregate, adding Recron Fibres @ 900 gms pack/ per cubic meter of concrete and Pidiproof LW+ or equivalent @ 200 ml/cement bag laid in alternate bays trowelled smooth on top in neat cement and making lines on the top surface diagonally or square at spacing, curing for minimum 7 days, as directed. |
| 11 | Self-Levelling Micro Concrete |
| 12 | Providing and laying/pouring in position/location Pidigrout 10M or equivalent (Self-levelling Micro oncrete) or as approved, mixing with specified quantity of water as recommended by the manufacturer including cutting the existing concrete floor to shape with cutting machine only, dismantling the existing concrete floor, cleaning the surface with water, applying bond coat of URP and cement in proportion 1:1 including necessary approved cantering and formwork, finishing top as directed including labour tools plants etc complete.The material must meet the following minimum technical standards:1. Compressive Strength (IS 4031-Part 6): 66 N/mm² at 28 days2. Flexural Strength (ASTM C 580): Min. 10 N/mm² at 28 days3. Tensile Strength (ASTM C 307): Min. 5 N/mm² at 28 days4. Flow Characteristics: Minimum 260 mm flow on table @ 30°C5. Fresh Wet Density: 2250 – 2400 Kg/m³ |
| 13 | Disposal of Malba |
| 14 | Disposal of building rubbish / malba / similar unserviceable. dismantled or waste materials from the premises by mechanical means, including loading, transporting, unloading to approved municipal dumping ground. Collecting and shifting of malba/rubbish from the roof of various heights to a designated place within the premises including all levels and leads. |
| 15 | Providing and applying bond coat |
| 16 | Providing and applying bond coat on the prepared surface with two component epoxy based bonding coat concrete bonding adhesive having coverage of 2.2 sqm/kg of approved make. |
| 17 | Protection to Waterproofing |
| 18 | Providing and laying 120 GSM Geotextile polypropylene with a min of 100mm wide overlap. |
| 19 | 20mm cement Mortar Plaster of Mix 1:4 (1cement: 4coarse sand) on roof slab and on walls |
| 20 | Epoxy based Moisture Insensitive Injection |
| 21 | Injection/ Grouting shrinkage free low viscosity epoxy resin grout in structure crack, wherever required by pressure and using mechanized injector gun through prefixed nozzles in structure element till its refusal, seal the nozzles with epoxy putty after the refusal. |
| 22 | Chipping of unsound /week concrete materials from up to 50mm average thickness with manual chisel and or by standard power-driven percussion type machine as direction of EIC. |
| 23 | Providing and placing in position TMT reinforcement bars of Fe500D or above grade including cutting and placing in position as per the actual site requirement. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender