Tender For Providing Electrical Installation Work For New 4G Bts Sites Under Ph -Ix.2 Mobile Project Of Odisha Circle(27Nos Indoor Sites).
Tender Value
33.76 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
67530
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Electrical Installation Work For New 4G Bts Sites Under Ph -Ix.2 Mobile Project Of Odisha Circle(27Nos Indoor Sites).
BOQ
| Sl. No. | Item Description |
| 1 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 2 | Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 3 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 4 | Providing and fixing of earth bus of 50 mm x 5 mm GI strip of 400 mm length on surface with suitable size insulators, drilling holes for connections etc. complete as required. |
| 5 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed cable as required. |
| 6 | Supply of the following size PVC insulated & PVC sheathed Aluminium conductor armoured cable 650/1100 V. grade confirming to IS : 7098 (Part-1) 1988 etc. as required. (Make- Polycab/Havells/Glowstar/Finolex) |
| 7 | 2 core x 16 sq.mm |
| 8 | Laying/drawing of power cable upto 1.1kV grade of size not exceeding 35 Sqmm of as per following manner as required. |
| 9 | Directly in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 10 | In the existing GI /HDPE pipe. |
| 11 | on wall /surface |
| 12 | In existing masonary duct/On air |
| 13 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a). 2 X 16 sq. mm (19mm) |
| 14 | Supplying and laying of 40mm dia HDPE pipe of PN 8 for protection of cable complete as required.( Make : Oriplast /SS ) |
| 15 | Supplying & erection of 65mm dia G.I. pipe (medium class) of 6mtrs leghth with plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) of suitable size foundation including excavation and refilling and S/F of 40mm x 3mm G.I. Flat clamp with nut bolt on top portion of the pole for fixing of overhead cable etc complete as required |
| 16 | Sypplying and Fixing of 30 Watt LED street light Fitting on the existing GI bracket/pole i/c connection testing etc complete as required.( Make - Havells ( Model -ENDURA SUNDOWNSL30W) or SS make) |
| 17 | Sypplying and Fixing of 32mm dia L-class GI Pipe bracket for fixing of LED street light Fitting i/c connection testing etc complete as required. |
| 18 | Supplying and Drawing of 2core 4 sq mm weather proof AL conductor service cable on air etc complete as required. |
| 19 | Supply of 63Amp TP&N switch disconnector fuse switch with 3nos HRC fuse and fixing the same on angle iron frame structure of suitable size, making connections, etc. as required. Providing of suitable size angle iron frame structure, drilling holes & fixing the same on wall is included in the scope of this item. ( Make - L&T ,( Model- IHKDTW4063) or SS ) |
| 20 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP-A |
| 21 | Wiring for circuit/ sub main wiring along with 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 22 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 23 | a) 5 A switch |
| 24 | b) 3pin 5/6 A socket outlet |
| 25 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 26 | a) 8 way, Double door |
| 27 | Supplying and fixing following rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 28 | a) 6-32Amps Single pole |
| 29 | b) 40Amp Double pole MCB |
| 30 | c) Blanking plate |
| 31 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 32 | a) 63 amps |
| 33 | Supply and fixing of 20 watt, 65000K LED Batten suitable for operation on 140 volts to 270 volts AC, 50Hz i/c fixing and connection etc. as required. (Havells /Phillips /Crompton) |
| 34 | S/F following items i/c connection etc as reqd. |
| 35 | Brass batten/angle holder |
| 36 | 9/10W BC LED bulb |
| 37 | Supply of exhaust fans by a new complete set of 380mm /15\\" heavy duty 1400 RPM Exhaust Fans having maximum free air delivering capacity not less than 3250 m3/ hour (1910 CFM) and maximum sound level not more than 60-65 db. with a capacitor start and run type, continuously rated, totally enclosed and ruggedly built motor having pre-lubricated double ball bearing with Class \\"A\\" and \\"E\\" insulation suitable for operation on 230 volts single phase 50 HZ AC supply with features for smooth & silent operation to deliver the maximum output at lower operating cost. The impeller of the Exhaust Fan is to be propeller type and both hub and impeller are to be dynamically balances and frames and arms mounted on rubber bushing so that, vibration are virtually eliminated. (Make- Almonard HD (ISI) / Crompton Greaves or similar superior) (Excluding installation) |
| 38 | 380mm /15\\" heavy duty 1400 RPM, maximum free air deliverying capacity not less than 3250 m3/ hour (1910 CFM) and maximum sound level not more than 60-65 db. |
| 39 | Installation of exhaust fan up to 450mm sweep in the existing opening with fastener/ GI nuts and bolts after removing the faulty/damaged if required, including making good the damage, connection, testing, commissioning etc. as required |
| 40 | Supplying and installation of gravity type Aluminum/ GI louver shutters suitable for 380mm sweep exhaust fans with fastener /GI nuts and bolts etc. complete as required. |
| 41 | Making opening on brick wall of suitable size for fixing of 380mm sweep Exhaust Fans including making good the damages, minor civil works etc. complete as required. |
| 42 | Charges for making co-ordination and liaison with supply company for obtaining Demand note / submitting test reports for energisation of LT line etc. complete as required.. Note : Application fees, Security, demand note charges, meter testing charges & Inspection fee or any other statutory charges pertaining to work shall be paid by BSNL . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender