Tender For Providing Lighting And Power Outlets For Walking Track At Dhyan Chand Sports Ground In Manuu Campus, Gachibowli, Hyderabad
Tender Value
10.28 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
21000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranga Reddy → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Lighting And Power Outlets For Walking Track At Dhyan Chand Sports Ground In Manuu Campus, Gachibowli, Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | Supply of the following sizes of armoured XLPE insulated Aluminium conductor cable of 1.1 KV grade confirming to IS 7098 (Part I) 1988 & part II amended up to date with ISI mark complete as required. 4 X 16 sq. mm |
| 2 | Supply of the following sizes of armoured XLPE insulated Aluminium conductor cable of 1.1 KV grade confirming to IS 7098 (Part I) 1988 & part II amended up to date with ISI mark complete as required. 4 X 6 sq. mm |
| 3 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm) |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Up to 35 sq. mm |
| 5 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 6 | Supplying and fixing of weatherproof four (04) module MCB enclosure box including fixing of one four pole 40A D-Curve MCB with IP65 protected, Bottom entry type complete with internal wiring and connection, as required. |
| 7 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. (For mounting 04 module MCB Enclosure Box) |
| 8 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
| 9 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 10 | Shifting and Erection of existing round G.I. pole set complete in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. |
| 11 | Painting with one or more coat of aluminum paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 12 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching)72 watt |
| 13 | Supply and fixing of weather proof loop in loop out box of size 136 x 253 x 115 mm, made out of IP 66 PVC Thermo plastic shock proof box, with locking arrangement I/c supplying and fixing the following accessories drilling holes, connections, earthing the body, along with suitable MS clamp of size 25 mm x 3 mm, aluminium painted flat iron strip for fixing the box on the pole including testing and commissioning etc, complete as required. a) 16 Amps capacity, 6 Way connector with suitable insulators and DIN channel - 1 No. |
| 14 | Supplying & fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required.3 Core 1.5 Sq mm Flat Cable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender