Tender For Repair/ Replacement To Plumbing, Tiling And Sanitary Fittings Including Periodical Works At Anuj Nayyar Vihar And Polo Road Messes (Garuda, Asc, Iml, Aad), Sw Comd Hut, S Comd Hut, Toi In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-
Tender Value
49 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement To Plumbing, Tiling And Sanitary Fittings Including Periodical Works At Anuj Nayyar Vihar And Polo Road Messes (Garuda, Asc, Iml, Aad), Sw Comd Hut, S Comd Hut, Toi In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair SS Grating doom 100 mm dia with or without waste hole complete all as specified. |
| 2 | S&F in repair SS Grating doom 75 mm dia with or without waste hole complete all as specified. |
| 3 | S&F in repair of 110 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls, floors, trenches etc complete all specified and directed. |
| 4 | S&F 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 5 | Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including ranking out joints, hacking for key, scrubing down with water etc complete all as specified. |
| 6 | M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even complete all as specified and directed. |
| 7 | Rendering 5 mm thick in cement mortar 1:3 in ceiling finished even and smooth complete all as specified and as directed. |
| 8 | M&L for preparation of new plastered surfaces of walls/celing and applying 1 mm thick wall care putty complete all as specified and directed. |
| 9 | M&L Preparation of new plastered surfaces of wall/ceiling and applying two coats of Oil bound distember complete all as specified and directed. |
| 10 | M&L preparation of New/old plastered surfaces of walls and applying two coat of cement base paint over primer coat inculding 1-2mm wall care putty complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed. |
| 12 | M&L for Vitrified Ceramic light shed Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 13 | Description all as per item No. 12.00 above but on vertical surfaces such as skirting / dados with and including 10 mm thick CM 1:4 as in backing coat complete all as specified. |
| 14 | M&L for coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 15 | M&L for glazed coloured ceremic tiles sizes 450x300x 7mm thk tiles on vertical surfaces, such as skirting/dado, incl 10 mm rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed. |
| 16 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed by Engineer-in-Charge |
| 17 | Description all as per item No. 16 above but for 20mm Dia. |
| 18 | S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 15 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 complete all as specified and as directed by Engineer-in-Charge |
| 19 | Description all as per item No. 18 above but for 20mm Dia. |
| 20 | S&F in repair looking mirror size 600x450mm mounted on 6mm thick PVC sheet and aluminium frame all around incl fix with necessary fixing arrangement complete. |
| 21 | S&F in repair CP towel rail 600mm long complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed. |
| 22 | S&F in repair 600 mm long PVC connection with stainless steel armed 15 mm bore with nuts complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed. |
| 23 | S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed by Engineer-in-Charge |
| 24 | S&F in repair for 15 mm dia fancy type CP Stop valves, Cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge . |
| 25 | S&F in repair 15 mm bore fancy type angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F in repair for 15 mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F in repair SS soap dish complete all as specified & directed. |
| 28 | S&F in repairs Vitreous China squatting pan 'Orissa' pattern,size 580x440 mm white with integral foot rests (excluding flushng cistern and flush pipe) and all as directed by Engneer-n Charge. |
| 29 | S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet, ball valve, float and handle including brackets, With flush pipe complete all as specified and directed. |
| 30 | S&F in repair 15mm bore brass CP basin mixer for mixing hot and cold water fixed as per manufacture's mannual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed. |
| 31 | S&F in repair wall mixer 3 in 1 chromium plated, (L- bend with long bend) with over head shower provision screwed for iron pipes 15mm bore complete all as specified and directed. |
| 32 | S&F in repair Corner Glass Shelf (with Bracket) complete all as specified and directed. |
| 33 | S&F in repair Glass Shelf 600mm Long (with Bracket) complete all as specified and directed. |
| 34 | S&F for Towel Ring Square/Round complete all as specified and directed. |
| 35 | S&F for Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed. |
| 36 | S&F in replacement Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratories with plugs, washer and wastes pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as specified and as directed by Engineer-in-Charge. |
| 37 | S&F in replacement plate rack stainless steel made out of sheet not less than 1 mm thick, size 30 inch 36 inches 10 inche with bracket all necessary fittings all as specified and directed by Engr-in-Charge. |
| 38 | Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed. |
| 39 | M&L for 18 to 20mm thick granite (of any type) work ( table rubbed and polished ) in steps, jambs,pillars, cooking platform with rounding to edges of stone slabs one edge and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and incl 10mm thcik screed bedding layer/ backing coat in CM 1:4, complete all as specified and as directed. |
| 40 | S&F in repairs 15mm bore brass chromium sink mixer of mixing 'Hot' and 'Cold' water, with swinging point screwed down for iron pipe complete all as specified. |
| 41 | S&F in repairs of Modular wardrobe, cupboards, cabinets, drawers, shelfs, vanity, dressing table including shutters (depth of 45 Cm up to 70 Cm) etc, all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8-10 mm thick HDHMR board (Action tesa or equivalent) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations. All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates, design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters, C/J gola profile for handel less or SS handel, telescopic channels 18'' / 20'' long, rollers for smooths sliding of drawers, etc as required complete all as specified and directed by Engr-in-charge. (Note: Only front face shall be measured and paid irrespective of area of HDHMR boards provided and fitting as required shall be deemed to be included in unit rate quoted) |
| 42 | S&F in repair 5mm thcik PVC wall paneling/Fluted or Louvers panels (any size & pattrern) fitted on wall & panels interlock with each other complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repairs aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws |
| 44 | S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed. |
| 45 | Supply and fix in repairs 40mm dia cupboard knobs fixed with nuts, screw and washers of mild steel bright finished, powder coated, fancy type complete all as specified and directed. |
| 46 | S&F in repair Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed |
| 47 | S&F 32/40 mm spring type PVC waste pipe fixed to WHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should not be less than 0.70RM) |
| 48 | S&F in repairs vitreous china Wash hand basin, white, flat back size 550 x 400mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32mm size bore of pipe complete all as specified and directed. |
| 49 | S&F in repair vitreous china counter top wash basin, white, of size 410x410x160 mm / 570x420x195 mm / 615x415x150 mm including coupling, bottle trap/waste pipe complete all as specified and directed. |
| 50 | S&F in repair vanity box of HDHMR of size 580x450x680 mm with table top basin and including all connected accessories like waste pipe, coulping complete all as specifies and directed. |
| 51 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern) excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device. |
| 52 | S&F Vitreous china wash down water closet pan wall hung WC FLS - IVY- 5951 with PP seat cover, hinges, accessories set, size 360 545x365 set jaquar or other equivelent , including flushing cistern and fixed with brass screw complete all as specified and as directed. |
| 53 | S&F in repairs vitreous china floor mounted WC (Cascade) one piece type (white) including connecetion in drain etc incl water closet seat cover CP health faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed and fixed in repairs. |
| 54 | S&F in repairs health faucet chromium plated with 1.50m CP long flexible pipe and chromium plate nuts completed all as specified and directed. Make: Cera/ Hindware or equivalent approved. |
| 55 | S&F in repairs cast copper alloy CP toilet paper holder fixed with plug and brass screw completed all as specified. |
| 56 | S&F in repair brass spindle half turn suitable for 15 mm bib cock / stop cock/ concealed stop cock/ angle cock complete all as specified and directed. |
| 57 | S&F in repair brass spindle half turn suitable for jaquar / hindware fancy type fitting wall Mixer/ Basin Mixer / Sink Mixer etc complete all as specified and directed. |
| 58 | S&F in repair internal fittings of flushing cistern suitable for one piece cascade type or wall Hung type water closet system complete all as specified and directed. |
| 59 | Dismantling ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed. |
| 60 | M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G.I (up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed. |
| 61 | M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed. |
| 62 | M&L for complete removal of existing wall surface and apply wall paper on wall surface stick with glue and adhesive over 1mm thick putty and oil primer complete all as specified. |
| 63 | M&L for Internal texture paint of approved pattern and colour of asian paint or equivalent incl complete removal of existing treament and aplying putty for preparation of base for texture, appling one coat of primer and appling finish coat for texture of approved pattern and colour by Engr-in-charge complete |
| 64 | Chipping off existing loose, damaged Concrete from RCC members of all affected RCC Columns, Beams, Slabs and Chajjas on External and internal facades, etc beyond main reinforcement. (if required in the opinion of the Consultant), carefully with chisel and hammer Providing and applying ‘Rusticide SS’ Rust passivator or equivalent as specified in the Brand Names to existing reinforcement. bars Including wire brushing of reinforcement, cleaning washing of concrete etc complete as directed.Providing and applying two coats of rust preventor slurry made out of “Polyalk Fixoprime” or equivalent as specified in the Brand Names and cement in proportion 1:1.5 to existing reinforcement bars as directed complete. Providing and applying bonding coat of slurry made out of “Polyalk EP” or equivalent as specified in the Brand Names and cement in proportion 1:1 to concrete and r/f substrates complete as directed Providing and applying “Polyalk EP” or equivalent as specified in the Brand Names. Polymer modified cement mortar in Required proportions (1:5:15) to RCC members Including Hand packing, curing and making the surface rough for plastering. |
| 65 | S&F curtain rod/ rail with stainless steel rod fancy type 25 mm dia including bracket and fancy type lattoo, wall to wall etc complete all as specified and directed. |
| 66 | S&F in repairs 100 mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 67 | S&F in repairs over head shower rose CP Brass with shower arm for 15mm bore pipe of size 150x150mmcomplete all as specified and directed. |
| 68 | S&F in repair looking mirror of selected quality sheet glass 5.5 mm thick designer with chromium plated brass screw and cup washer complete all as specified and directed. |
| 69 | Cleaning and removing all scale and dirt, etc from water tanks of PVC of high rise bldg 500-1000 Ltr capacity from mouth of circulating pipes with suitable chemical or solvent as per manufacturer's instruction duly taking care not to damage etc including disconnecting, reconnecting & refixing water tanks in position complete. |
| 70 | S&F in repair Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 71 | S&F in repair Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 72 | S&F in repair PVC tank cover for 500/1000 Ltrs complete including locking arrangement complete all as specified and as directed by Engineer-in-Charge. |
| 73 | Preparation of surface of walls/ceiling with Washing, rubbing down and stopping of distempered and painted surface with sand paper / Putty in accordance to standard Engineering practices to make the surface free from dust, loose paint etc, Complete all as specified and as directed by Engr-in-Charge. |
| 74 | M&L for applying of 1 mm thick wall care putty over prepared surfaces of walls / ceiling including sanding of putty surface properly with ragemarg to make the surface free from dust or loose particles. Complete all as specified and as directed by Engr-in-Charge. |
| 75 | Providing and applying two coats of smooth acrylic emulsion ( interior surface of walls / ceiling) with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ 1 ltrs (undiluted)/10 sq mtrs diluted with water in 2:1 ratio applied over and including priming coat with Roller finish and allow 6-8 hrs to dry the surface for second coats of paint complete all as specified and as directed. |
| 76 | Preparation of old painted surfaces of wood work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 77 | Description all as per item No. 76.00 above but on steel surfaces complete all as specified and directed. |
| 78 | M&L for preperation of old decorated surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New/Old and walls/ceiling surfaces with filling wall care putty in potholes as required complete all as specified and all as directed. |
| 79 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender