Tender For special Repair Against Ber Pump And Motor Alongwith Its Allied Accessories At Jackwell Pump House And Main Pump House At Umroi Mil Stn Under Ge Umroi
Tender Value
33.80 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
17 days left
EMD
67600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ri Bhoi → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Against Ber Pump And Motor Alongwith Its Allied Accessories At Jackwell Pump House And Main Pump House At Umroi Mil Stn Under Ge Umroi
BOQ
| Sl. No. | Item Description |
| 1 | Taking up MS/CI water mains of size 80/100/150/200 mm bore (including all fittings), with spigot and socket ends, lead joints and flange joints including burning out joints wherever applicable complete all as specified and directed |
| 2 | Supplying, laying and jointing MS ERW Pipe Heavy grade with complete fittings of size 200 mm dia laid in trenches including jointing materials and fittings such as flanges, nut & bolt, gasket as required at site etc complete all as specified and directed. |
| 3 | Supplying, laying and jointing MS ERW Pipe Heavy grade with complete fittings of size 150 mm dia laid in trenches including jointing materials and fittings such as flanges, nut & bolt, gasket as required at site etc complete all as specified and directed. |
| 4 | Supplying, laying and jointing MS ERW Pipe Heavy grade with complete fittings of size 100 mm dia laid in trenches including jointing materials and fittings such as flanges, nut & bolt, gasket as required at site etc complete all as specified and directed. |
| 5 | Supplying, laying and jointing MS ERW Pipe Heavy grade with complete fittings of size 80 mm dia laid in trenches including jointing materials and fittings such as flanges, nut & bolt, gasket as required at site etc complete all as specified and directed. |
| 6 | M& L for MS Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces for upto 150mm Bore Pipe (all ends flanged) complete all as specified and directed. |
| 7 | M& L for MS Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces for 200mm to 300mm Bore Pipe (all ends flanged) complete all as specified and directed. |
| 8 | Supply and fixing in repair DI non return valve of 100mm dia suitable for 16 kg/cm2 working pressure dia ISI marked with jointing material, rubber gasket 6 mm thick nuts, MS nuts, bolts, washers complete all as specified and as directed. |
| 9 | Supply and fixing in repair ductile iron sluice valve flange type of size 150 mm dia PN 1.6 grade with stainless steel spindle & brass check nut (non raising spindle type conforming to IS - 14846) including fixing to pipe line with nuts, bolt and washers, rubber gasket (neoprene) complete all as specified and directed. |
| 10 | Supply and fixing in repair ductile iron sluice valve flange type of size 100 mm dia PN 1.6 grade with stainless steel spindle & brass check nut (non raising spindle type conforming to IS - 14846) including fixing to pipe line with nuts, bolt and washers, rubber gasket (neoprene) complete all as specified and directed. |
| 11 | Supply and fixing in repair of DI Foot Valve of 150 mm dia suitable for 16 kg/cm2 working pressure dia ISI marked with jointing material, rubber gasket 6 mm thick nuts, MS nuts, bolts, washers complete all as specified and as directed. |
| 12 | M&L for precast concrete block with solid block in 1:2:4 type B1 using 20 mm graded agregate as in bed blocks of size 300x300x300mm for holding pipe, etc. set in cement mortar 1:4 including necessary formwork complete all as specified and as directed. |
| 13 | M &L for copper strip 20 x 3.15mm with saddles and fixing screws etc.for roof conductors and down conductors above ground/ for extended earthing connections all as directed and specified as engr-in-charge. |
| 14 | M&L in repair for earthing complete with copper earth plate electrode of 60 cm x 60 cm x 3.15 mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to copper strip of size 20x3.15mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point all as specified and testing on completion including provision of earth lead protected by 40 mm bore light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including provision of 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with 6mm dia MS bars @ 75mm C/C both ways and provision of suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. and testing on completion complete all as specified and as directed . |
| 15 | M&L construction of brick masonry valve chamber of size 1200mm x 1200mm x 1200mm (internal dimension) with PCC 1:3:6 foundation 150mm thick, brick work 23cm thick built in cement mortar 1:6, PCC 1:3:6 coping 50 mm thick, plastering 15mm thick in cement mortar 1:4 to all internal and exposed surfaces including excavation and earth work in any type of soil, MS sheet cover 3mm thick fixed with angle iron frame 30x30x4 mm including hinges of size 125mm with locking arrangement embedded in PCC and painting to MS cover and frame with two coats of synthetic enamel paint over a coat of red oxide primer, etc. complete all as specified and directed. |
| 16 | Supply, install, testing and commissioning centrifugal electric driven pump set of 26.5lps rated discharge capacity working at 85m head with suitable capacity motor , 3 phase , 440 volt, 50Hz with 2975 Rated RPM in and including PCC foundation (1:3:6 type C2) of suitable size and height including dismantling the unserviceable 50 HP Pump along with all accessories and depositing back to MES Storeyard complete all as specified and directed. Note: Scope of work includes Pump,motor, Accessories ( Base frame, coupling,coupling Guard, connection of priming system, a well prepared name plate board hang to wall and foundation bolts & nuts) and 1 man Day Supervision for commissioning and to submit the test report complete all as specified and directed. |
| 17 | Supply, install,testing and commissioning of submersible pumping set of capacity 60 HP capacity electrically driven with supply voltage of 415 volts with discharge capacity 180 LPM at 85 m head of outlet of suitable size including spring loaded SS suction strainer, connected with column pipe and taking down unserviceable pump set and deposited to MES storeyard complete all as specified and directed. |
| 18 | Supply, laying and testing XLPE insulated, armoured heavy duty electric copper conductor cable,1100 Volts grade, cross-sectional area 35 sqmm x 3.0 Core for connection of Pump Motor to Starter complete all as specified and directed by Engr-in -charge. |
| 19 | Supply, laying and testing Flat Submersible cable copper conductor cable, 1100volts grade, cross-sectional area 25 sqmm x 3 Core for connection of Pump Motor to starter all as Specified and directed by Engr-in -charge. Please Enable Macros to View BoQ information |
| 20 | Supply, laying and testing Flat Submersible cable copper conductor cable, 1100volts grade, cross-sectional area 25 sqmm x 3 Core for connection of Pump Motor to starter all as Specified and directed by Engr-in -charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender