Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #58469400

Tender For Special Repair Replacement Of Lightning Protection System At Various Buildings At installation Kardip, Kamorta And Provision Of Synchronization Panel For 2X160 Kva Ncn Dg Sets At installation Kardip, Kamorta. 8850/E8

Issued by Statutory Bodies & Commissions/Committees · Nicobars, Andaman And Nicobar Islands
Tender Value
24 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
15 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair Replacement Of Lightning Protection System At Various Buildings At installation Kardip, Kamorta And Provision Of Synchronization Panel For 2X160 Kva Ncn Dg Sets At installation Kardip, Kamorta. 8850/E8

BOQ

Name of Work:- SPECIAL REPAIR REPLACEMENT OF LIGHTNING PROTECTION SYSTEM AT VARIOUS BUILDINGS AT INS KARDIP, KAMORTA AND PROVISION OF SYNCHRONIZATION PANEL FOR 2X160 KVA NCN DG SETS AT INS KARDIP, KAMORTA. 8850/E8
Sl. No. Item Description
1Supply & fixing in repair single pointed Air termination rod, single pointed, aluminium rod 12mm dia and 300mm long complete all as specified & directed
2Supply and fix in repair aluminium strip 25mmx3mm complete with saddles epoxy base and fixing screws for fitting the strip for roof conductors and down conductors above ground complete all as specified and directed.
3M & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required but 25x4mm galvanised iron strip including taking up the old unserviceable strip, complete all as directed by Engr-in-charge.
4Supply & Fix in repair 40 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc including clamps, nut, bolt and washers etc after taking out unserviceable pipe complete all as specified and directed.
5Supply & fixing in repair Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified & directed
6Dismantiling and taking out old unserviceable earthing and Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 25 X 4 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 3 of MES SSR part-I(2009)Note: Unit rate quoted shall be deemed to be included the following (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 40 mm nominal bore medium grade GI protection pipe 7.5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
7Design, manufacturing /fabrication, supply, installation testing and commissioning of synchronization / AMF panel suitable for synchronising 2 DG sets of capacity all 160 KVA to share electric load as per load demand ) Cubical panel board of suitable size(proper space shall be provided for working in each compartment), 3 Phase 4 wire system indoor type 2.0mm , separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable 3.5 Core in and out, incoming and outgoing feeders duly marked on riveted plates etc, indoor type, double door, cubical type, pedestal mounted, of suitable size, CPRI approved having, IP 65, independent compartment for bus bar, incoming feeder and each out going feeders, totally dust and vermin proof with front and rear openings & lockable, factory made, fabricated out of 2 mm thick CRCA Sheet confirming to IS 8623 duly treated through 7 tank pre-treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structural RAL 7032 shade colour & MS angle iron section of 50X50X6 mm frame, built in industrial type locking arrangement on front and back and suitable for 3 Phase 415 volts 50 Hz, AC supply 415/440, 3 phase, 4 wire AC 50Hz having copper bus bar capacity required to carry current 110% load with three phase and half neutral colour coded, prewired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved copper strip for connecting switchgears, all as standard practice of manufacturer specifications comprising of following all as specified and as directed
8a) Power cables incoming/outgoing/Bus bars / Control cables as recommended by OEM are included.(b) SMC/DMC insulators (c) Air circuit breakers MDO type capacity 800 Amps(d) Synchronisation relays in all incomings, differential protection relays, master trip circuit relay, trip circuit supervision relays, voltage protection relays and other engine & alternator control and prection equipment’s on all incomings.(e) CTs & PTs, metering equipment, CT shoot terminals other misc. accessories(f) Modification needed in DG circuit, control panel, alternator, existing panel are included as required.Note: PCC in 1:2:4 typeB1 using 20mm graded stone aggregate for foundation and platform ofsuitable size is deemed to be included with quated rate.
91X160 KVA DG Set Incomer including following accessories of each feeder :-02 Nos1. MCCB 250 A, 4P, 36KA MP based protection release with O/C, S/C. LSIG protection- 01 No2. Extended rotary handle- 01No3. Spreader terminal-set of 3- 02 No4. Power contactor, 3p, 250A AC1 duty- 01 No5. Neutral contactor, 3P, 45A AC1 duty- 01 No6. 2NO+2NC Aux. contact block- 02 No7. MCB 6 A, SP, ICU=10 KA, C- curve- 01 No8. MCB 6 A, DP, ICU=10 KA, C- curve-01 No9. MCB 16 A, DP, ICU=10 KA, C- curve- 01 No10. Selector switch 6A, 2 pole 2 way middle OFF- 01 No
1011. LED Red, 230 VAC, cluster LED type- 01 No12. LED Yellow, 230 VAC, cluster LED type- 01 No13.LED Blue, 230 VAC, cluster LED type- 01 No14. LED Red, 230 VAC, cluster LED type- 01 No15.LED Green, 230 VAC, cluster LED type- 01 No16. Led Amber, 24 VDC, cluster LED type- 01 No17. Push button actuator Green, flush head type with 1NO contact block - 02 No18. Push button actuator Red, flush head type with 1N contact block- 02 No19. Emergency push button- 01 No20. Multifunction meter V A F PF, KW, Energy, KVA, KVAR, KVARH, KVAH, Run & ON hours, RPM, % unbalance, THDBEZEL: 96 X 96, LED display- 01 No21. CT 250/5A, 5VA, class: 1.0, tape wound- 03 No
1122. Aux contactor 4NO, 24v DC- 02 No23. Aux contactor 2NO+2NC, 24V DC- 08 No24. Aux contactor 2NO+2NC, 220V AC- 02 No25. Add ON block 2NO+2NC- 04 No26. Add ON block 4NO- 02 No27. Synchronizing relay 24v DC power, with inbuilt OV, UN, SC, and OC DG protection. (Easygen-2000 series)- 01 No28. Voltmeter (DC)- 01 No29. Ammeter (DC) - 01 No30. Battery charger 24V DC power 20A - 01 No31. Voltage monitoring relay with 2C/O relay - 01 No32. Hooter-24V DC - 01 No
12OUTGOING 400A 4 Pole MCCB including following accessories - 1 Nos1 400 Amps MCCB 4 Pole2 Voltmeter (DC)- 01 No3. Ammeter (DC) - 01 No4. LED Red, 230 VAC, cluster LED type- 01 No5. LED Yellow, 230 VAC, cluster LED type- 01 No6.LED Blue, 230 VAC, cluster LED type- 01 No7. LED Red, 230 VAC, cluster LED type- 01 No8.LED Green, 230 VAC, cluster LED type- 01 No9. Led Amber, 24 VDC, cluster LED type- 01 No
13PLC BASED Synchronising & AUTO LOAD SHARING1. ComAp Synchronizing controller ComAp InteliVision Color Display InteliField Bus GatewayComAp make InteliGen4 200 DG controller ComaAp 3.02. PLC for Interlocking Delta 1.03. SMPS 24V, 4 Amp GIC 1.03. 8 Channel Relay Card 230V AC UL 3.04. VMR GIC 1.05. Aux Contactors 2 No 2 NC 230V AC L&T 5.06. Add on Block 2 No 2 NC 24V DC L&T 2.07. 16A DP MCB L&T 3.08. 12/24V, 10 Amp DC Battery Charger PCS 3.09. UPS 650 KVA Microtech 1.010. Cooling Fan 6\\" Rexnord 4.011. Space Heater with Thermostat Reputed 4.012. DG Start/Stop Push Button Esbee 6.013. Auto/Manual Operated Salzer 3.014. Terminal Block - Lot
14GENERAL ITEMS:Steel Fabricated Body made out of 2/1.6 mm Thick CRCA Sheet Steel duly Powder Coated ITE 1.02. Alu. Bus bar 600A with Support duly Heat shrinkable PVC sleeved, Hindalco Lot3. Hardware & Accessories Reputed Lot4. PVC wiring RR Cabel Lot5. Programming ITE
15Schedule of Credit (Minus) Rs.13670.00 NOTE: Bidder shall insert credit amount of Rs.13670.00 as rate in Green field under Col-13. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469400
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 24 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair Replacement Of Lightning Protection System At Various Buildings At installation Kardip, Kamorta And Provision Of Synchronization Panel For 2X160 Kva Ncn Dg Sets At installation Kardip, Kamorta. 8850/E8
Basic Detail
Tender No 8850/E8
Bidding Type Tender
Location
City Nicobars
State Andaman And Nicobar Islands
Key Dates
Publish Date 10 Nov 2026
Submission Date 01 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 24 Lakhs
Tender Fee 500
EMD 48000
Exemption Available
Document List
6a3820eb-2d86-4aef-9487-d4b7c6b34c3e.html
8850TenderDocu.pdf
BOQ_895316.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

6a3820eb-2d86-4aef-9487-d4b7c6b34c3e.html

pdf

8850TenderDocu.pdf

xls

BOQ_895316.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender