Tender For Repair/Maint/Replacment Of Cgi Roofing, Gutter, Rwh, Plinth Protection, Varoius Technical Shed At 24 Ed Manauri..
Tender Value
10 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
13 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint/Replacment Of Cgi Roofing, Gutter, Rwh, Plinth Protection, Varoius Technical Shed At 24 Ed Manauri..
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 2 | M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed. |
| 4 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge |
| 5 | M & L for preparation of new surfaces and applying 2 coats of OBD over a coat of primer all as specified and directed. |
| 6 | M & L rendering 15 mm thick in cement plaster 1 : 4 on fair faces of brick wk or concrete surface finishing the surface even and smooth without using extra cement. |
| 7 | M & L for preparation of new surface of wall including cornices and apply two coat of cement based paint over a coat of primer etc complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L in applying one coats of synthetic enamel paints on old steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 9 | Dismantling timber scantlings 40 sq. cm and over in section, in any position all as specified and directed. |
| 10 | M & L for Second class hard-wood in scantlings complete all as specified and directed by the Engineer-in-Charge. |
| 11 | M/L 2nd class hard wood plain fillets square, rectangular or trangular in section , clean sawn se-cured with nails or brads area exc 3 and n.exc 13 sqcm. |
| 12 | M/L surfaces for two coat of synthetic enamel paint over one coat of zinc primer on wooden surface of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint on new wooden surfaces. |
| 13 | M&L in applying two coats of synthetic enamel paints over a coat of pink wood primer on wooden surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 14 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge. |
| 15 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate , as in copping etc complete all as specified and directed by Engr-in-charge. |
| 16 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Eng-in-Charge.. |
| 17 | M & L for 75mm Thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge. |
| 18 | Dismantling of AC (corrugated/semi corrugated) sheet/PGI/CGI in roof covering including ridges all as specified and directed by Eng-in-Charge. |
| 19 | S&F 6mm thick Asbestos cement corrugated/semi corrugated sheet in roofs, fixed with L/J type hook or cranked hook bolt and making good to disturb surface etc complete all as specified and directed by Eng-in-Charge. |
| 20 | S&F AC Serrated ridge two pieces adjustable 6mm thick for corrugated or semi corrugated AC sheets fixed all as specified and directed by Eng-in-Charge. |
| 21 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface, all as specified and directed. |
| 22 | Ditto all as above but except sheeting. |
| 23 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/roof top lantern/ridge/valley gutter in wall/roof, fixed with self tapping screws as specified |
| 24 | Ditto all as above but except sheeting. |
| 25 | S & F 6 mm thick poly carbonate sheet of any shape and size including in roof coverings incl ridges etc complete as specified & directed |
| 26 | Repair of valley gutter joint filling,holes filling with M seal all as specified and directed by engineer - in -charge. |
| 27 | S & F in repair PVC (SWR) pipes, single socketed in any length with rubber rings 110mm dia and fixed to wall complete all as specified and directed |
| 28 | S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 29 | S&F in repair PVC (SWR) junction single, (Single T) 110mm bore equal or unequal complete all as specified and directed |
| 30 | S & F in repair PVC (SWR) pipes, single socketed in any length with rubber rings 75mm dia and fixed to wall complete all as specified and directed |
| 31 | S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 32 | S&F in repairs PVC (SWR) junction single, (Single T) 75mm bore equal or unequal complete all as specified and directed |
| 33 | Dismantling wrought iron or mild steel work of any description all as specefied. |
| 34 | M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.(Fe- 410W Grade-E-250 quality A). compete all as specefied and directed by E-in-Charge. |
| 35 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with steel & rubber washers and one hexagonal or square nut, etc. compete all as specefied and directed by E-in-Charge. |
| 36 | M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 37 | Dismantling wall and ceiling boards fiber,pulp,insulation etc any thickness including Grid, cover fillets etc complete all as specified and directed. |
| 38 | Ditto all as above but except grid or cover fillet. |
| 39 | S & F in repair ceiling 4mm thick Non asbestos fibre cement building boards only and including two coat of white wash, complete all as specified and directed. |
| 40 | S & F gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed.(except grids) |
| 41 | S & F gypsum board 12mm thick in ceiling over and including anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm complete all as specified and as directed |
| 42 | M & L for preparation of ceiling surface and applying two coats of OBD over 1.0 mm thick putty as required and as directed |
| 43 | S & F in repairs cement building board/designer E-Board only with all finishes size 595 x 595mm fixed in ceiling required complete all as specified and directed. |
| 44 | S & F grid false ceiling in GI system powder coated prelude main runner section 38 x 24 x 0.40mm, cross 'T' 28 x 24 x 0.40mm, wall angle 24 x 24 x 0.40mm and including providing and fixing 10mm thick non asbestos fibre fire resistant cement building board/designer E-Board with all finishes size 595 x 595mm fixed in ceiling frame work with all necessary hanging washers, expansion holding fasteners etc for securing framework to ceiling wherever required complete all as specified and directed. |
| 45 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (including Cleaning repairing,marking date of cleaning on tanks etc complete all as specified. |
| 46 | Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 15 mm dia pipe complete all as speicified and directed. |
| 47 | Ditto all as per above item but of 20mm bore pipe |
| 48 | S & F in repairs 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 49 | Ditto all as per above item but 20mm size Please Enable Macros to View BoQ information |
| 50 | Ditto all as per above item but 20mm size Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender