Tender For Repair To Bituminous Road, Road Furniture, Road Marking Paint And Interlocking Tiles Etc. At Barrackpore Under Ge Barrackpore
Tender Value
80 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
12 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Bituminous Road, Road Furniture, Road Marking Paint And Interlocking Tiles Etc. At Barrackpore Under Ge Barrackpore
BOQ
| Sl. No. | Item Description |
| 1 | Prepaing of old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a prime coat of Cationic Bitumen Emulsion RS1 confirming to IS:8887 at a rate of application of 0.3 kg/sqm on bituminous suraface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existining surface complete all as specified and directed. |
| 2 | Applying evenly a prime coat of Cationic Bitumen Emulsion RS1 confirming to IS:8887 at a rate of application of 0.3 kg/sqm on bituminous suraface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existining surface complete all as specified and directed. |
| 3 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and depth exceeding 50 mm but not exceeding 100 mm complete all as specified. |
| 4 | Material and labour WBM 7.5 cm thick compacted thickness with Granite, trap or Basalt type coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient materials and camber required complete all as specified. |
| 5 | All as per item 4 above except materials |
| 6 | Preparing of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS 8887 at a rate of application of 1 kg/sqm complete all as specified. |
| 7 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS 8887 at a rate of application of 0.3 kg/sqm complete all as specified and directed. |
| 8 | Material and labour for premixed bituminous macadam (consolidated thickness 75 mm or less) by mecanical paver, using binder contents 4% by weight of total mix, over primed surfaces of road using paving bitumen (grade VG-30), and compacted with vibratory power roller to required camber and gradient complete all as specified and as directed. |
| 9 | Material and labour for bituminous premixed semi dense asphaltic concrete by mecanical paver, 30 mm consolidated thickness using crushed graded stone aggregate mixed with binder content @ 5.5% by weight of total mix using paving bitumen (grade VG-30), rolled and compacted to required camber and gradient with vibratory power roller complete all as specified. |
| 10 | Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like exc 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approvd colour conforming to BS 3262-1989 with special applicator machine all as per manufactuers instructions complete all as specified and directed. |
| 11 | Supply and fix as in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 12:4 (150x150x300mm) type B1 using 20 mm grade crushed stone aggregates complete all as specified and directed. |
| 12 | Supply and fix as in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 13 | Supply and fix as in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one Ni-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed |
| 14 | Supply and fix as in repairs convex mirror of 80cm dia with MS poles of 50mm dia tubular pole medium grade (length of poles is approx 2.00m) fixed with cleats and hooks including nuts, embedded in ground of any type of soil of excn size (45cm x 45cm x 60cm) in PCC 1:24 Type B1 using 20mm graded aggregate MS tubular pole should be painted with two coats of synthetic enamel paint over a coat of redoxide incl taking down of old u/s complete all as specified and directed by Engr-in-Charge. |
| 15 | Demolition of Cement concrete in ground floors and pavings n exc. 15cm thk (below or above ground level) complete all as specified and as dircted. |
| 16 | Material and labour for 75 mm thick PCC 1.4:8 type D-2 using 40 mm graded crushed stone aggregates as in paving or sub base all as specified. |
| 17 | Material and labour for providing sand cushion below interlocking paver block including seprading and levelling complete all as specified and directed. |
| 18 | Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as per manufacturer instructions and as per direction of Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender