Tender For Rep/Maint/Replacement Of Tiling, Flooring, Joinery, Plumbing Etc At Varoius Technical Shed At 24 Ed Af Stn Manauri
Tender Value
10 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
19 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rep/Maint/Replacement Of Tiling, Flooring, Joinery, Plumbing Etc At Varoius Technical Shed At 24 Ed Af Stn Manauri
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing in repair GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or celings compete all as specified and directed |
| 2 | Supply and fixing in repair GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or celings compete all as specified and directed. |
| 3 | S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed |
| 4 | S&F in repair 15mm PTMT pillar cock compete all as specified and directed. Make Prayag or equivalent |
| 5 | S&F in repair bib tap (Long body) fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 6 | S&F in repair 15mm CP bib cock with flange compete all as specified and directed. .Make Prayag or equivalent |
| 7 | S&F in repair 15mm PTMT bib cock long body with flange. Make compete all as specified and directed. cera or equivalent |
| 8 | S&F in repair 15mm PTMT bib cock short body with flange compete all as specified and directed. |
| 9 | S&F in repair stop valves /angle valves fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 10 | S&F in repair 15mm PTMT angle cock with flange compete all as specified and directed. . |
| 11 | S&F in repair 15mm CP 2 way angle cock with flange compete all as specified and directed. Make Cera or equivalent |
| 12 | S&F in repair 15mm CP 2 way bib cock with flange compete all as specified and directed.Make Cera or equivalent |
| 13 | S&F in repair concelated stop cock 15mm with flange compete all as specified and directed. . Make cera or equivalent |
| 14 | S&F in repair concelated stop cock 20mm with flange compete all as specified and directed. . Make cera or equivalent |
| 15 | S&F in repair 15mm health faucet ABS body with 1.25 Mtr SS braided connection pipe compete all as specified and directed. . Cera or equivalent |
| 16 | S&F in repair towel rail 600mm (24\\") compete all as specified and directed. . Cera or equivalent with Cat Part No F5007103 |
| 17 | S&F in repair soap dish compete all as specified and directed. . Cera or equivalent with Cat Part No F5007106 |
| 18 | S&F in repair 20mm ball brass valves, high pressure, with polythelne float and fly nut in 20mm bore complete all as specified and directed. |
| 19 | Dismantling water tanks of 500 Ltrs complete all as specified and directed |
| 20 | S & F Rotational moulded polethelene water storage tanks in 500 litres capasity (cylinderical vertical & triple layer with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete, ISI marked, all as specified and directed. |
| 21 | Dismantling existing 500 Ltrs water tanks, setting aside, cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and re-fixing in position and including writing date of cleaning by stencils using synthetic enamel paint on tank all as directed and specified by Engr-in-Charge |
| 22 | S & F in repairs waste coupling (full thread) 32mm.complete all as specified and directed. |
| 23 | S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm, white, with integral foot rests complete including provision of lime concrete bedding and connection to trap, & to flushing pipe, anti-syphonage pipe, etc, complete including making good to floor |
| 24 | S & F in repairs vitreous china wash down water closed pan (pedesstal pattern/EWC), white with fixing bolts, trap, including connection to drain (or outgoing pipe) & to flushing pipe, antisyphonage pipe, etc, seat and cover complete |
| 25 | S & F in repairs white 10 Ltrs PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipe complete |
| 26 | S & F in repairs Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including bracketscomplete all as specified and directed by Engr-in-Charge |
| 27 | S & F in repairs vitreous china half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe |
| 28 | S & F in repairs PVC waste pipe for sink/basin of size 32mm/40mm complete all as specified and directed by Engr-in-Charge |
| 29 | S & F in repairs PVC waste pipe for urinal complete all as specified and directed by Engr-in-Charge |
| 30 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers compete all as specified and directed |
| 31 | S&F in repairy PVC connection pipe 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge |
| 32 | S & F in repairs flush pipes of polythylene of low or high density or PVC, 32mm dia for low level cistern to pedestal pan, including all joints compete all as specified and directed |
| 33 | S&F in repair SS grating doom 100mm dia all as directed and specified |
| 34 | S & F in repairs 110 mm PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall and floors compete all as specified and directed |
| 35 | S & F PVC (SWR) 75mm pipes single socketed in any length with rubber ring joints fixed to walls and floors compete all as specified and directed |
| 36 | S/F 110mm PVC (SWR) bends any radius. |
| 37 | S & F 75mm thick PVC (SWR) bends any radius |
| 38 | S & F in repairs 110mm PVC (SWR) 'P' trap |
| 39 | S & F in repairs 110mm PVC (SWR) 'S' trap |
| 40 | S&F in repair wall mounted stainless steel automatic urinal flush sensor set dual power supply mode chrome plated sensor for urinal complete all as specified and directed. |
| 41 | Hacking out old broken glass from metal frame including punching or drilling out old glazing compete all as specified and directed |
| 42 | M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each pane compete all as specified and directed |
| 43 | S & F solar control film 25 micron reflective type sticked to glass planes as per instructions of manufacturers including removal of existing film complete all as specified and directed. |
| 44 | S&F in repair 18/19mm thick commercial plywood interior grade both sides fixed with screws to timber frame work edge chamfered including beading/battens as required including taking down as directed by Engr-in-Charge complete |
| 45 | S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete. |
| 46 | S&F in repair 2nd Class hard wood plain fillets square/ rectangular in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, wrought and fixed with nails complete |
| 47 | S&F in repair 250 mm long aluminium anoised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed. |
| 48 | S&F in repair 100 mm long aluminium steel hinges medium weight all as specified and as dierected by Engineer-In-Charge. |
| 49 | S&F in repair 100 mm size stainless steel handle all as specified and as dierected by Engineer-In-Charge. |
| 50 | S&F in repair 150 mm size stainless steel handle, fabricated type all as specified and as dierected by Engineer-In-Charge. |
| 51 | S&F in repair 100 mm size aluminium anodised handle all as specified and as dierected by Engineer-In-Charge. |
| 52 | S&F in repair 150 mm size aluminium anodised handle, fabricated type all as specified and as dierected by Engineer-In-Charge. |
| 53 | S&F in repair 100 mm long stainless steel barrel tower bolt all as specified and as dierected by Engineer-In-Charge. |
| 54 | S&F in repair 150 mm long stainless steel barrel tower bolts all as specified and as dierected by Engineer-In-Charge. |
| 55 | S&F in repair 100 mm long aluminium anodised barrel tower bolt all as specified and as dierected by Engineer-In-Charge. |
| 56 | S&F in repair 125 mm long aluminium anodised barrel tower bolts all as specified and as dierected by Engineer-In-Charge. |
| 57 | S&F in repair 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete. |
| 58 | S&F in repair 100 mm size 4-lever mild steel mortice lock vertical type with two keys etc compete all as specified and directed. |
| 59 | S&F in repair floor door stopper of Aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length of 150 mm size compete all as specified and directed. |
| 60 | Supply and fixing in repair aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete. |
| 61 | S&F in repair 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws compete all as specified and directed. |
| 62 | S&F in repair Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified. |
| 63 | S&F in repair stainless steel curtain rod 25 mm dia incl. brackets and curtain rod holders of suitable size at ends etc complete all as specified and directed |
| 64 | Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor.Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor.(ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ).(iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor (auth rep).(iv) The area/Location of Job will be all MD and OTM accn in AOR of AGE (I) |
| 65 | Demolition of brick work built in CM.complete all as specified and directed. |
| 66 | M&L for brick work with sub class 'B\\" bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4). complete all as specified. |
| 67 | M&L brick work with with sub class 'B\\" bricks straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified. |
| 68 | M&L brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified and directed. |
| 69 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 70 | M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and fair. complete all as specified and directed. |
| 71 | M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and fair. complete all as specified and directed. |
| 72 | M & L for preparation of new plastered surfaces of wall and applying two coats of OBD over priming surfaces compete all as specified and directed. |
| 73 | M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat primer compete all as specified and directed. |
| 74 | Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed by Eng-in-Charge. |
| 75 | M & L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 76 | M & L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in skerting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and directed. |
| 77 | M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Eng-in-Charge. |
| 78 | M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. |
| 79 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-charge. |
| 80 | M&L for providing 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate , finished even and smooth with using extra cement etc complete all as specified and directed by Engr-in-charge. |
| 81 | M & L for 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 82 | M&L providing Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including screed bed or bedding layer 20 mm thick in cm 1:6 as in floors complete all as specified and directed. |
| 83 | M & L for 75mm Thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge. |
| 84 | Taking down chowkhat with shutter without taking off shutter from chowkhat of any description not exceeding 1.5 Sqm each complete all as specified and directed |
| 85 | Taking down chowkhat with shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 86 | Taking down Shutters of any description exc 1 sqm but n. exc. 4.00 sqm each complete all as specified and directed |
| 87 | Dismantling MS work of any description not otherwise provided for all as specified and directed. |
| 88 | S & F MS framed work such as grills, gratings, frames,holdfast etc with ends of bars shouldered and or riveted or forgot into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work complete all as specified and directed. |
| 89 | M&L Welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and directed by the Engineer-in-Charge. |
| 90 | S & F MS Fe 410 (grade A) framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeti g or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 91 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed . |
| 92 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge |
| 93 | S & F for pressed steel door frames of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 94 | S & F for pressed steel door frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 95 | M & L for PCC type C-1 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow pressed steel frame etc complete all as specified and directed. |
| 96 | S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified |
| 97 | S & F 30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat all as specified and directed . |
| 98 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 99 | S&F 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed |
| 100 | S&F extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed. |
| 101 | S&F Aluminum Barrel tower bolt 125mm complete all as specified and directed |
| 102 | S&F aluminium anodised 250mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed. |
| 103 | M & L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 104 | M & L for preparation of new or previously untreated surface of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 105 | Taking down Aluminium shutters and dismantling stiles & rails including glass panes/particle board carefully.Refabricating and refixing in frame position using all old material including replacement of required neoprene packing,cleats,screws with necessary Aluminium angle cleat screws etc. complete all as specified and directed by Engineer in charge. |
| 106 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick Aluminium alloy sheet foundation box, main body with stainless steel cover, groverning pivot made of brass, other parts made of mild steel heavy duty made and fixed complete all as specified . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender