Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58469376

Tender For Painting To Runway, Turning Pad, Dispersal, Chequered Painting To Walls, Steel Posts, Arp, Signal Square, Repairs/ Replacement Of Dtgms Sheet, Gtc Posts, Old Atc Pillars/ Barriers, Wind Socks Pole And Misc Works At Shibpur Under Ge(S) Digl

Issued by Statutory Bodies & Commissions/Committees · North and Middle Andaman, Andaman And Nicobar Islands
Tender Value
25 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Painting To Runway, Turning Pad, Dispersal, Chequered Painting To Walls, Steel Posts, Arp, Signal Square, Repairs/ Replacement Of Dtgms Sheet, Gtc Posts, Old Atc Pillars/ Barriers, Wind Socks Pole And Misc Works At Shibpur Under Ge(S) Diglipur.

BOQ

Name of Work:- PAINTING TO RUNWAY, TURNING PAD, DISPERSAL, CHEQUERED PAINTING TO WALLS, STEEL POSTS, ARP, SIGNAL SQUARE, REPAIRS/ REPLACEMENT OF DTGMs SHEET, GTC POSTS, OLD ATC PILLARS/ BARRIERS, WIND SOCKS POLE AND MISC WORKS AT SHIBPUR UNDER GE(S) DIGLIPUR.
Sl. No. Item Description
1M&L for preparation of existing bituminous / concrete surfaces of all dirt, scales, oil grease and foreign materials etc. and Painting Lines, Dashes, Arrows, Letters, etc. on Roads / Pavements / Runway / Dispersal / Taxi Tracks and the like exceeding 10cm width or girth with two Coats of Water based Acrylic Runway marking paint of colour White complete all as specified and as directed.Note: (a) The rate quoted shall be deemed to be considering following provisions and nothing shall be paid extra on this account.[b] Periodicity of painting, will be as decided by the Engineer-in-Charge in consultation with users. For this purpose, the tenderer shall maintain a register indicating the details of location, date, area, signature of Engineer-in-Charge, user's representative and Contractor. [d] The work is required to be executed in highly restricted area along Main Runway. Therefore, the work shall be executed during non-flying hours either during Day or Night without causing any disturbance for flying. Proper safety arrangement, equipment shall be provided by the contractor for workmen.
2M&L for preparation of existing black top surfaces/concrete surfaces of Taxiway marking and Turning Pads of runway by removing of all dirt, scales, oil grease and foreign materials etc and painting to lines, dashes, arrows , letters, boxes etc exceeding 10 cm width or girth (Retro Reflective type) of colour yellow with white or black borders, cold applied type, applied by skilled paintgers/applicators of wet film thickness of 400 microns in single coat and dry film thickness of 200 micron and coverage @ the rate of 0.4 ltr to 0.5 ltr per square metre and application of drop on glass beads type IV (Reflective Index 1.5) @ 350 gm per square metre complete all as specified and as directed.
3S&F in repairs DGTM boards made of black acrlic sheet 4 to 5mm with 6 Nos of 100 mm dia air pressure clearance holes per board including fixing the board to frame work made up of heavy duty PVC pipes. The frame shall consists of 03 Nos of 63mm dia PVC pipe heavy duty PVC pipes (class-5) conforming to IS : 4985 of 10 KGf/sqcm as in vertical post of approximate height 1.28m each duly covered as top with PVC cap and inner connected at top, middle and bottom width 25 mm dia heavy duty PVC pipes (Class-5) conforming to IS-4985 of 10 KGf/Sqcm with suitable reducer tee joints and jointed with PVC solvent cement, fixing the acrlic board with suitable PVC bushes and stainless steel screws, washers and nut & bolts to PVC pipes, inserting the frame in suitable GI/MS pipe embedded in PCC 1:2:4 , type B1 (using 20mm graded stone aggregates) of size 450 x 450 x 600 mm, including necessary earth work in any type of soil and removal of soil upto 50 metre, applying two coats of synthetic enamel paint over a coat of zinc chrome primer to MS pipe complete all as specified and as directed.
4M&L for preparation of old painted/decorated surfaces for GTC east Hut, GTC East/West, DIWE pole, GTC post pillars, Windsocks pole, HRDF Hut, IAAMS,Met surface observatory, Culvert, Retaining wall, ARP, Base of all PAPI units and sentry post, Met surface observatory surfaces by applying one coat of Acrylic paint (red/white/yellow) of any description over 10cm girth or width complete all as specified and as directed.
5M&L for preparation of old painted decorated paver blocks/ Concrete chequered tiles including cleaning out dirt at flag hoisting point surfaces by applying one coat of Acrylic floor paint pattern type (red/white/yellow) of any description over 10cm girth or width complete all as specified and as directed.
6S&F for high intensity prismatic/flurocent self adhesive radium self encapsulated tape, deep orange colour, as in letters (Black, Roman, Italic or Indian) including necessary stops, commas, short lines, dashes, brackets etc size of letter over 10 cm width or girth complete all as specified and as directed.
7M&L for washing, rubbing down and stopping of old painted surfaces up to 15.00 metres height and applying two coat of Weather Proof Exterior Emulsion Paint [100% Acrylic] on Walls in Chequered Pattern with approved shade and size of Chequers including providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and as directed.
8M&L for Writing letters or figures (Block. Roman, Italic or Indian) n.exc. 30 cm high complete all as specified and as directed.
9M&L for Writing letters, digits or figures (Block. Roman, Italic or Indian) exc. 30 cm and not exceeding 1.5 m height having minium thickness of 10 cm in black or yellow or white with two coats of water based acrylic road marking paint on dispersal and runway complete all as specified and as directed. Note:- Writing work should be carried out by painter with edge proper marking. Dights and alphabets will be counted and measured accrodingly.
10Cleaning / removing the rubber particles from runway surface (Touch down points of Aircraft) by brushing mannually / mechnically washing down with water pressur (without disturbing the original surface) and to prepare surface for SRT (Skid Resistance Test) complete all as specified and as directed.
11Performing Skid Resistance Test (SRT) on the rubber removed surface at the Touch down area of Aircraft @ 2.5 m c/c on both side ( Eastern / Western side ) of the center line of runway in a span of 15.00 m total width and for a given runway length of 200 m with the help of Portable BRITISH PENDULUM TESTER complete all as specified and as directed.Note:- Caliberation test certificate should be submitted for the test equipment and test report should be submitted in hard copy in standard format. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469376
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 25 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Painting To Runway, Turning Pad, Dispersal, Chequered Painting To Walls, Steel Posts, Arp, Signal Square, Repairs/ Replacement Of Dtgms Sheet, Gtc Posts, Old Atc Pillars/ Barriers, Wind Socks Pole And Misc Works At Shibpur Under Ge(S) Diglipur.
Basic Detail
Tender No 8247/E8
Bidding Type Tender
Location
City North and Middle Andaman
State Andaman And Nicobar Islands
Key Dates
Publish Date 10 Nov 2026
Submission Date 02 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 25 Lakhs
Tender Fee 500
EMD 50000
Exemption Available
Document List
11d8c8dd-4b94-4815-b88d-ef3989c97e2b.html
8247TENDER.pdf
BOQ_895345.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

11d8c8dd-4b94-4815-b88d-ef3989c97e2b.html

pdf

8247TENDER.pdf

xls

BOQ_895345.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender