Tender For special Repair / Replacement Of Led Security Light, Gate Light, Garden Light And Connected Wks At Certain Locations Under Ge (Mis) Mhow
Tender Value
43.69 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
11 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair / Replacement Of Led Security Light, Gate Light, Garden Light And Connected Wks At Certain Locations Under Ge (Mis) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting & dismentling of damaged/unsv cable any type /make and Supply & laying (in replacement) cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor using lugs/ferrul both end of cable and testing complete all as directed for following size :-(a) 06 Sqmm 4 core |
| 2 | (b) 10 Sqmm 4 core |
| 3 | (c) 16 Sqmm 4 core |
| 4 | (d) 25 Sqmm 3.5 core |
| 5 | Excavation of trenches not exceeding 1.50 m in width and 1.50 m in depth for laying of electric cables, including excavation, getting out and disposal/stacking of excavated earth as directed, complete in all types of soil, as specified and directed by the Engr-in-Charge.Note: (i) Excavation shall be carried out manually by labour only. Use of JCB or any other mechanical excavation equipment shall not be permitted at the site. (ii) The contractor shall take all necessary precautions to avoid damage to existing underground cables, PCC plinths and other existing structures/services during execution of the work. (iii) Any damage caused to existing cables, PCC plinths or other structures/services due to the contractor's negligence or during execution of the work shall be repaired/restored by the contractor at his own cost, without any extra payment. The work shall be completed to the satisfaction of the Engr-in-Charge. |
| 6 | Removing surplus excavated soil to a distance n.exc 50 m and depositing where directed at a level n. exc 1.50m above starting point complete all as specified and directed. |
| 7 | Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed. |
| 8 | Supply and laying flyash brick (Modular size) laid dry and flat across the length of cable for protection of cable complete all as specified and directed. |
| 9 | M&L for sand cushioning to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified and directed.Note : Punned thickness shall be measured. |
| 10 | M&L for boring under road horizontely of size 40 mm bore using GI pipe for passing of cable in road/path in hard/soft/ loose soil complete all as specified and directed. |
| 11 | S&F in replacement 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size all as specified and directed. |
| 12 | S&F in replacement Pole box junction three phase of size 255x 205 x 112 mm, made of plastic body in white color,use for outdoor installation IP66 and inbuilt locking arrangement, fix to pole with suitable MS clamp comprising of cable terminals point fix on epoxy insulated support with one controlling MCB 6 Amp 10 kA 240 volt complete all as specified and directed. |
| 13 | S&F in replacement bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete |
| 14 | S&F in replacement MS bracket for mounting flood light fitting made out of MS angle iron of size 40x40x6 mm of length not less than 1.0 mtr, fixed to pole/ earth and grout using PCC & clamp, nut & bolts including painting of bracket with one coat of synthetic enamel paint over a coat of red oxide primer complete all as directed |
| 15 | M&L (in replacement) for sub main wiring with 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire , FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core , 1100 Volts grade along with FRLS PVC insulated unsheathed flexible copper conductor (Multistrands) in green colour as continuous earth wire conforming to IS 694 with latest amendments and ISI marked, drawing in suitable size of steel conduit and making incoming / outgoing electric connections by using required size copper lugs / thimbles, making good to disturbed surface to match with existing including removal of existing old complete in all respect as specified and directed. Note:- Two runs of 6 Sqmm cable, one runs of 6 Sqmm cable and one run of steel conduit will be measured as one unit. |
| 16 | S&F in replacement switch socket combination multipurpose 2 in 1, 6 pin, 6 and 16 Amp, and flush type universal for power point wiring complete all as specified and directed. |
| 17 | S&F in replacement Metal flash box 4 module for fixing of switch socket combination of thickness 1.2mm painted with black color in and out side before fixing on wall complete all as specified and directed. |
| 18 | S&F busbar chamber box of 3.15 mm sheet with tinned plated 04 Nos copper bars of following bus bar and following box size, factory made, suitable for pole/wall mounted including all connections with aluminum strips/lugs, glands to be provided at cable entries, powder coated paint complete for the following rating:-(a) Bus bar of rating 100 Amp |
| 19 | (b) Bus bar of rating 200 Amp |
| 20 | S&F in replacement LED street light fitting of the following capacities, suitable for 230 V AC supply, outdoor type, comprising high-pressure die-cast aluminium housing with heat-resistant finish, complete with LED driver, lamp mounting bracket, impact-resistant and corrosion-resistant components, efficient thermal management system and multiple-optic light distribution arrangement, with minimum IP65/IP66 degree of protection, including all necessary accessories, connections, installation, testing and commissioning, complete in all respects as specified and directed by the Engr-in-Charge:-Make: Philips /Bajaj/ Havells/Crompton/ make as per Particular Specification (list of Make) as approved by GE.(a) 60 watt |
| 21 | (b) 70 watt |
| 22 | (c) 90 watt |
| 23 | S&F in replacement LED floodlight fitting of the following capacities, suitable for 230 V AC supply, outdoor type, complete with LED driver and LED light source, incorporating an efficient thermal management system, multiple-optic light distribution arrangement, impact-resistant and corrosion-resistant construction, and having IP66 degree of protection, including all necessary mounting arrangements, accessories, electrical connections, installation, testing and commissioning, complete in all respects as specified and directed by the Engr-in-Charge:-Make: Philips /Bajaj/ Havells/Crompton/ make as per Particular Specification (list of Make) as approved by GE.(a) 100 Watt |
| 24 | (b) 120 Watt |
| 25 | (c) 170 Watt |
| 26 | (d) 210 Watt |
| 27 | S&F in replacement LED-type post-top lantern fitting of the following capacities, suitable for 230 V AC supply, outdoor type, decorative post-top design providing 360-degree indirect light distribution, with IP65 degree of protection, impact-resistant and corrosion-resistant construction, complete with suitable LED driver, LED light source, mounting arrangement and all necessary accessories, including electrical connections, installation, testing and commissioning, complete in all respects as specified and directed by the Engr-in-Charge:-Make: Philips /Bajaj/ Havells/Crompton/ make as per Particular Specification (list of Make) as approved by GE.(a) 20 Watt |
| 28 | (b) 40 Watt |
| 29 | S&F in replacement Flexible LED cove light, IP 68 with reliable performance and excellently water proof, anti dust LED Strip uses high brightness, transparent, Heat resistant with PVC covering duly visible in dark from far off distance fitted with suitable connectors for inter connection along with driver complete all, plug and socket arrangement suitable to be fitted on edges of buildings, pathways and outer periphery of boundary walls, Main Gates, Hardstandings etc complete with clamping at suitable distance to take the shape of required physical structure of Warm white complete all as specified and directed.Make: Philips /Bajaj/ Havells/Crompton/ make as per Particular Specification (list of Make) as approved by GE. |
| 30 | S&F in replacement MCB DB double door type, comprising of one MCB TPN 32 Amp 'C' series 415 volt including fixing of DB on pole/ wall with suitable arrangement for the garden light including making wall surface smooth as existing using plastering and white wash complete all as specified and directed. |
| 31 | S&F in replacement new generation, 3.0 meter height decorative poles with LED luminaries for outdoor landscape/ pathway/ Street lighting for diffused lighting with high power LEDs as light source & IP65 protection, Lumen 3600 lm, wattage-30W, CCT-4000K, IK07 with driver, energy saving, environment friendly, long life aesthetically designed, fully cast aluminium body finished with polyurethen paint including accessories, foundation work and connection with PVC insulated & sheathed stranded copper conductor cable three core of size 2.5 Sqmm complete all as specified & directed by Engr-in-Charge. Make of light fitting: RusticGlow-Model No BGP568 of Philips /Bajaj/ Havells/Crompton/ make as per Particular Specification (list of Make) as approved by GE. |
| 32 | S&F in replacement of new generation, 650 mm height LED Bollard for outdoor landscape/ pathway/ Street lighting for diffused lighting with high power LEDs as light source & IP65 protection, Lumen 800 lm, wattage-10W, CCT-3000K, IK07 with driver energy saving, environment friendly, long life aesthetically designed fully cast aluminium body finished with polyurethen paint including accessories, foundation work and connection with PVC insulated & sheathed stranded copper conductor cable three core of size 2.5 Sqmm complete all as specified & directed by Engr-in-Charge.Make of light fitting: BCP100 of Philips /Bajaj/ Havells/Crompton/ make as per Particular Specification (list of Make) as approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender