Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #58469345

Tender For Repair / Replacement To Old Unserviceable External Water Supply Distribution Pipe Lines And Allied Works At Various Locations Of Chh Sambhajinagar Mil Station Under Ge(S) Ahilyanagar

Issued by Statutory Bodies & Commissions/Committees · Aurangabad, Maharashtra
Tender Value
32 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
9 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair / Replacement To Old Unserviceable External Water Supply Distribution Pipe Lines And Allied Works At Various Locations Of Chh Sambhajinagar Mil Station Under Ge(S) Ahilyanagar

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 18-Nov-2026 BOQ corrigendum BOQ 30-Nov-2026

BOQ

Name of Work:- REPAIR / REPLACEMENT TO OLD UNSERVICEABLE EXTERNAL WATER SUPPLY DISTRIBUTION PIPE LINES AND ALLIED WORKS AT VARIOUS LOCATIONS OF CHH SAMBHAJINAGAR MIL STATION UNDER GE(S) AHILYANAGAR
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains or laying of pipe/cables or for shafts, wells cesspits, man holes etc not exceeding 1.5 m in width or 10 sqm on plan and not exceeding 1.50m in depth, in any kind of soil, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains or laying of pipe/cables or for shafts, wells cesspits, man holes etc not exceeding 1.5 m in width or 10 sqm on plan and not exceeding 1.50m in depth, in ordinary rock, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.
3Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains or laying of pipe/cables or for shafts, wells cesspits, man holes etc not exceeding 1.5 m in width or 10 sqm on plan and exceeding 1.50m but not exceeding 3.0m in depth, in any kind of soil, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all as specified and directed.
4Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.
5M&L for cutting the existing bituminous road / PCC hard standing upto 75cm in depth, 60cm in width, getting out excavated materials and making good the damaged portion after laying of pipes by returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick and PCC 1:2:4 type B1 using 20mm graded stone aggregate upto 30cm depth from top of the road complete all as specified and as directed.
6M&L for GI tubing, medium grade, 20 mm bore laid in trenches / floors or fixed to wall in any length with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc complete including dismantling/ taking out old pipes complete all as specified and as directed.
7M&L for GI tubing, medium grade, 50 mm bore laid in trenches / floors or fixed to wall in any length with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc complete including dismantling/ taking out old pipes complete all as specified and as directed.
8S&F in repairs gun metal, globe or gate valves, 20 mm bore, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.
9S&F in repairs gun metal, globe or gate valves, 50 mm bore, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.
10Supply, laying, jointing and testing in replacement ductile iron pipes of 100 mm bore with spigot and socket ends, centrifugally cast, class-K 9, conforming to IS 8329 in any length, laid in trenches/ pipe support etc, pressure testing after laying complete as per IS- 12288 including styrene butadiene rubber gasket joints complete all as specified and as directed by Engr-in-Charge.
11Notes for Item No 1 to 33 :-1) The Quantity considered in the schedule is tentative. The contractor shall carry out the work as per directions of the Engr-in-Charge. 2) The contractor shall execute the work without disturbing the existing pipe line. Old U/S pipe line shall be removed by the contractor after successful execution of the work.3) Many sewage lines/ chambers and LT/HT/ communication cables are passing through the area, hence due care shall be taken by the contractor during excavation and laying of pipe. Where new pipe line laying crosses the existing sewage line, the contractor shall ensure that the crossing is made using a full length pipe. No joints / fittings shall be permitted within a distance of 2.5 meter in either side of sewage line centre point and PCC 1:3:6 concrete packing shall be provided completely surrounding the sewage line at the crossing as directed to avoid a chance of contamination. Exacavation shall be carried out by manual means in such locations as per directions of Engr - in- charge. Please note that any damage caused to existing infrastructure shall be made good
12by the contractor at his own cost and necesaary fiitings and cable joints shall be provided immediately to ensure uninterrupted supply. The damage should be rectified immediately within 06 hrs and any further delay shall attract a penalty of Rs 2000.00 per day.4) For road cutting work the required prior permission shall be obtained and the repair work shall be carried out immediately same day to ensure the utility of road. Barrier/ flag men shall be deployed during the period. 5) Contractor shall ensure proper road barricading and safety measures while executing the road cutting work.6) The temporary structural steel supporting work to pipeline wherever required shall be carried out by the contractor as directed. 7) The contractor shall provide flange end type DI pipe for rising mains whereever required at site.8) Replacement of pipeline shall be carried out as per complaints received from user and as directed by Engr - in- charge only. 9) The whole length of pipelines in a single stretch shall not be replaced during repairs. 10) The cost of above provisions under Note 1 to 9 is deemed included in the scope of work.
13Supply, laying, jointing and testing in replacement ductile iron pipes of 150 mm bore with spigot and socket ends, centrifugally cast, class-K 9, conforming to IS 8329 in any length, laid in trenches/ pipe support etc, pressure testing after laying complete as per IS- 12288 including styrene butadiene rubber gasket joints complete all as specified and as directed by Engr-in-Charge.
14Supply, laying, jointing and testing in replacement ductile iron pipes of 200 mm bore with spigot and socket ends, centrifugally cast, class-K 9, conforming to IS 8329 in any length, laid in trenches/ pipe support etc, pressure testing after laying complete as per IS- 12288 including styrene butadiene rubber gasket joints complete all as specified and as directed by Engr-in-Charge.
15Supply, laying, jointing and testing in replacement ductile iron pipes of 250 mm bore with spigot and socket ends, centrifugally cast, class-K 9, conforming to IS 8329 in any length, laid in trenches/ pipe support etc, pressure testing after laying complete as per IS- 12288 including styrene butadiene rubber gasket joints complete all as specified and as directed by Engr-in-Charge.
16M&L for drilling, tapping, cast iron / ductile iron water main ( any dia) in position for branch connection with straight plain brass ferrule of suitable size for 15 mm bore branch connetion complete all as specified and as directed
17M&L for drilling, tapping, cast iron / ductile iron water main (any dia) in position for branch connection with straight plain brass ferrule of suitable size for 20 mm bore branch connetion complete all as specified and as directed
18S&F in replacement for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces, single branch, \\"Y\\" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable for upto 150 mm bore pipe complete all as specified and as directed.
19S&F in replacement for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces, single branch, \\"Y\\" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable for 200 to 300 mm bore pipe complete all as specified and as directed.
20M & L for mild steel rolled sections as in fabrication work as per site requirement as in for motor foundation/ supports / clamps/ plates including necessary welding / cutting / bending , nuts, bolts, washers , drilling and fixing on floor suitable for existing pump motors and including one coat of primer, one under coat and one finishing coat of aluminium paint, mild steel rolled sections conforming to Fe-410-W (Grade E-250, Quality-A) all as specified and as directed by Engineer in Charge.
21Supply and fix in replacement sluice valve of size 100 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. incl taking out old unserviceable sluice valve from valve chamber / trenches complete all as specified and as directed.
22Supply and fix in replacement sluice valve of size 150 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. incl taking out old unserviceable sluice valve from valve chamber / trenches complete all as specified and as directed.
23Supply and fix in replacement sluice valve of size 200 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. incl taking out old unserviceable sluice valve from valve chamber / trenches complete all as specified and as directed.
24Supply and fix in replacement sluice valve of size 250 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. incl taking out old unserviceable sluice valve from valve chamber / trenches complete all as specified and as directed.
25M&L for mechanical joint having 2 Nos CI / DI Sockets, 1 No CI / DI Collar and 2 Nos styrene butadiene rubber gaskets, etc for 80 mm bore pipe alongwith nuts, bolts, washers , gaskets etc. including cutting CI / DI pipe and reducing to required length for insertion in position of mechanical joint connected with line complete all as specified and directed by Engr-in-Charge.
26M&L for mechanical joint having 2 Nos CI / DI Sockets, 1 No CI / DI Collar and 2 Nos styrene butadiene rubber gaskets, etc for 100 mm bore pipe alongwith nuts, bolts, washers , gaskets etc. including cutting CI / DI pipe and reducing to required length for insertion in position of mechanical joint connected with line complete all as specified and directed by Engr-in-Charge.
27M&L for mechanical joint having 2 Nos CI / DI Sockets, 1 No CI / DI Collar and 2 Nos styrene butadiene rubber gaskets, etc for 150 mm bore pipe alongwith nuts, bolts, washers , gaskets etc. including cutting CI / DI pipe and reducing to required length for insertion in position of mechanical joint connected with line complete all as specified and directed by Engr-in-Charge.
28M&L for mechanical joint having 2 Nos CI / DI Sockets, 1 No CI / DI Collar and 2 Nos styrene butadiene rubber gaskets, etc for 200 mm bore pipe alongwith nuts, bolts, washers , gaskets etc. including cutting CI / DI pipe and reducing to required length for insertion in position of mechanical joint connected with line complete all as specified and directed by Engr-in-Charge.
29M&L for mechanical joint having 2 Nos CI / DI Sockets, 1 No CI / DI Collar and 2 Nos styrene butadiene rubber gaskets, etc for 250 mm bore pipe alongwith nuts, bolts, washers , gaskets etc. including cutting CI / DI pipe and reducing to required length for insertion in position of mechanical joint connected with line complete all as specified and directed by Engr-in-Charge.
30M&L for Cutting existing 100 mm dia pipe for inserting Tee of size 100x100x50mm including lead joint and excavation work, etc complete all as specified and as directed.
31M&L for Cutting existing 200 mm dia pipe for inserting Tee of size 200x200x100mm including lead joint and excavation work, etc complete all as specified and as directed.
32M&L for Cutting existing 250/200 mm dia pipe for inserting Tee of size 250/200x250/200x150/100mm including lead joint and excavation work, etc complete all as specified and as directed.
33Supply, laying and commissioning, fabricated 250 mm dia M.S pipes (commercial quality) made out of 8 mm thick MS plates, including gas cutting to required size, rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine including freight charges, loading/unloading as per IS 3589 and IS -5504, as required and as specified by Engr-in-charge.
34M&L for construction of valve pit/chamber of Internal dimensions 900 mm x 900 mm x 900 mm, using PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) for foundation, 23 cm thick fly ash brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:4), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3 coats of white wash on rendered surfaces and on coping, 5 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed.
35M&L for construction of valve pit/chamber of Internal dimensions 1200 mm x 1200 mm x 1200 mm, using PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) for foundation, 23 cm thick fly ash brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:4), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3 coats of white wash on rendered surfaces and on coping, 5 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469345
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 32 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair / Replacement To Old Unserviceable External Water Supply Distribution Pipe Lines And Allied Works At Various Locations Of Chh Sambhajinagar Mil Station Under Ge(S) Ahilyanagar
Basic Detail
Tender No 8410/E8
Bidding Type Tender
Location
City Aurangabad
State Maharashtra
Key Dates
Publish Date 18 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 32 Lakhs
Tender Fee 500
EMD 64000
Exemption Available
Document List
11ef3c9e-fba9-4a90-a9b3-93239e195ba3.html
8410Tenderdocuments.pdf
BOQ_895290.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 9 days
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

11ef3c9e-fba9-4a90-a9b3-93239e195ba3.html

pdf

8410Tenderdocuments.pdf

xls

BOQ_895290.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender