Tender For Repair Maintenance Of Wiring, Submain Wiring, Dbs And Other E/M Misc Work Under Ge (Mcte) Mhow
Tender Value
20 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
15 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Maintenance Of Wiring, Submain Wiring, Dbs And Other E/M Misc Work Under Ge (Mcte) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Point wiring in repairs including with PVC insulated FRLSH PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area for phase/ neutral in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed/ wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green FRLSH, PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including galvanised boxes or modular flush box with bakelite sheet for mounting switches, sockets, fan regulators etc for the following. |
| 2 | (a) One light/ fan/ bell point controlled by one switch cable size 1.5 Sqmm complete all as specified and directed. |
| 3 | (b) One 5 Amps socket out let point controlled by one switch on same board with other switches, complete all as specified and directed. |
| 4 | (c) One 5 Amps socket out let 3 pin on the same board with other switch with cable size 1.5 Sqmm complete all as specified and directed. |
| 5 | All as per Srl item No. 1.00 here in before but using pvc insulated unsheathed 2.5 Sqmm cross sectional area cable for phase/ neutral & for earth 2.5 Sqmm green PVC insulated cable for 15 Amps socket point on independent board controlled by one switch complete all as specified and directed. |
| 6 | M&L for Point wiring with PVC insulated FRLSH, PVC unsheathed cable, single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into with and including Existing/ surface/ PVC casing-capping not less than 20mm wide, ISI marked, with 1.5 Sqmm unsheathed, stranded copper cable for continuous earth wire and including pressed steel terminal boxes of reqd size made out of 1.2mm thick sheet and covered with 2.8mm thick plastic laminated bakalite (hylam) or modular PVC box and cover plate of suitable size ISI marked sheet suitable for switches/ sockets/ regulators complete all as specified and directed for the following. Note:- Type of wiring as per direction by Engr-in-Charge |
| 7 | (a) One light/ fan/ bell point controlled by one switch complete all as specified and directed. |
| 8 | (b) One point for socket outlet 5 amp on independent board, complete all as specified and directed. |
| 9 | (c) One point for socket outlet 5 Amp same board, complete all as specified and directed. |
| 10 | All as per Srl item No. 6.00 above, but with FRLSH cable 2.5 Sqmm stranded copper conductor FRLSH with 2.5 Sqmm copper conductor earth wire for switch/ socket outlet 5 pin, 15 Amps multipurpose on independend board complete all as specified and directed. |
| 11 | S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed. |
| 12 | S&F modular switch 1 way 6 A, 1 module complete all as specified and directed. |
| 13 | S&F modular switch 2 way 6 A, 1 module complete all as specified and directed. |
| 14 | S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. |
| 15 | S&F switch modular type 16 A, 1 module complete all as specified and directed. |
| 16 | S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed. |
| 17 | S&F lamp holder insulated body with back plate for batten fittings complete all as directed. |
| 18 | S&F for Modular Bell push 6 Amps single module complete all as specified and directed. |
| 19 | S&F in replacement, electric bell, ding dong, AC, 220 V, single pole, complete all as specified and directed. |
| 20 | S&F in repair LED inverter type bulb of 9 watt, Of base B-22 CDL, suitable for fixing in lamp holder including taking down old unsv complete all as specified and directed. |
| 21 | Supply & fix in repair sheet metal enclousure with a 3 pin (2 pin and earth) plug & socket complete with one MCB SP 20 Amps of breaking capacity 10KA, 'C' series, 240 volts including taking down old unsv complete all as specified and directed. |
| 22 | S&F in repairs for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium/ polycarbonate housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. |
| 23 | S&F in repairs LED tube light fittings 1 x 9/ 10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed. |
| 24 | S&F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts and taking down old unsv light complete all as specified and directed. |
| 25 | S&F for energy saving recess/ surface mounted luminaire 35/ 36W, high efficiency PMMA diffuser gives soft glare free light, suitable for 600 x 600 ceiling cut out, recess mounted 36W LED luminaire in MS housing (2' x 2') incl Provn of three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement including taking down old unsv light fitting complete all as specified and directed. |
| 26 | S&F for energy efficient, Ultra Modern design LED luminiaire 36W (1 x 4) with CRCA housing white power finish, which provides soft-light glare free symmetrical illumination suitable for Armstrong/ Grid ceiling/ surface application, incl provn of three core cable of copper conductor of size 1.0 sqmm, making necessary electric connection from celing rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all necessary fixing arrangment including taking down old unsv light complete all as specified and directed. |
| 27 | Supply & fix surface mounted round LED panel of 12 W Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection including taking down old unsv complete all as specified and directed. |
| 28 | Supply & fix surface/ recessed mounted round/ Square size 1' x 1' LED panel of 24 W Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection including taking down old unsv complete all as specified and directed. |
| 29 | S&F in repairs of Decorative wall mounted luminaire made out polycarbonate witg unbreakable globe suitable for LED bulb and provision of LED bulb 07 watt complete including taking down old unsv complete all as specified and directed. |
| 30 | S&F for exhaust fan steel body AC single phase 230V of size 300mm sweep with blades, frame and louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint including taking down old unsv exhaust fan and deposit the same in the AGE E/M-III store complete all as specified and directed. |
| 31 | S&F for energy efficient exhaust fan havey duty of 225mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint including taking down old unsv exhaust fan and deposit the same in the AGE E/M-III store complete all as specified and directed. |
| 32 | S&F for energy efficient exhaust fan havey duty of 450mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint including taking down old unsv exhaust fan and deposit the same in the AGE E/M-III store complete all as specified and directed. |
| 33 | S&F replacement of ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, run with electronic regulator or remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 28W (+10%) and rate speed 350 RPM (+10%) Min air delivery 220 CFM with service value shall not be less than 7.85 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including taking down old unsv fans and deposit the same in the MES store complete all as specified and directed. |
| 34 | Supply & fix electric wall fan of 400mm sweep, 230 Volts single phase, white in colour, complete with all accessories like nuts, bolts, clamps etc and connection from ceiling rose including taking down old unsv wall fan and deposit the same in the AGE E/M-III store complete all as specified and directed. |
| 35 | Supply and fix in repair MS down rod 'medium grade' 15mm dia, in appropriate length of segments of required size of each down rod as per site requirement, including all fixing arrangments like hooks, clamps, nuts, bolts etc for hanging the ceiling fan at site, complete with making split holes, cut or threads at both end of pipe as required for hanging of Ceiling fan incl. painting of down rod with two coats of synthetic enamel white colour paint over one coat of primer complete all as specified and directed. |
| 36 | Supply & fixing plastic body exhaust fan AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unsv exaust fan deposit to E/M Store complete all as specified and directed. |
| 37 | Supply & fixing plastic body exhaust fan AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unsv exaust fan deposit to E/M Store complete all as specified and directed. |
| 38 | S&F in repair TPN DB with provision for MCB TPN as incomer and SP MCBs as outgoing made of steel sheet phosphatised powder coated with bus bar, neutral link earth bar and DIN Rail having IP 42-IK 09 with metal door capacity 4-ways 415 V, connection with aluminium/ copper lugs including civil/ plastering work for make up good the disturbed surface matching with existing surface complete all as specified and directed. |
| 39 | S&F MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 100 to 125 Amps rating, 16 KA breaking capacity including taking down old unsv complete all as specified and directed. |
| 40 | Supply and fixing in repairs double door SPN DBs 8 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed. |
| 41 | S&F in repairs double door SPN DBs 4 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed. |
| 42 | Supply and fixing in repairs double door SPN DBs 12 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed. |
| 43 | S&F in repairs MCB SPN 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 44 | S&F in repairs MCB SPN 40 to 63 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 45 | S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 46 | S&F in replacement 240V 10KA 'B' curve, mainiature circuit breaker (MCB) of current carrying capacity TPN 40 to 100 Amp in the DB complete with connection testing and commissioning and connected with aluminium/ copper by using lugs, including taking down old unsv complete all as specified and directed. |
| 47 | S&F in repair PVC insulated flexible cable three core Copper conductor of size 2.5 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and directed. |
| 48 | M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall including taking down and old unsv complete all as specified and directed. |
| 49 | M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall including taking down and old unsv complete all as specified and directed. |
| 50 | Supply and fixing GI pipe light grade 40mm dia in short lengths, to walls/ poles/ pillers including cutting,chasing and fixing one end on walls/ pillers/ in ground for garden light fittings/ gate light complete all as specified and directed. |
| 51 | Supply & laying and testing commisioning cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core laid in pipes, trenches/ ducts on poles including taking down old unsv XLPE cable, complete all as specified directed. |
| 52 | Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified and directed. |
| 53 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 54 | Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. |
| 55 | M&L for filling approved fine crusted sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and directed.(Note : Punned thickness of sand shall be measured) |
| 56 | M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection complete all as specified and directed. |
| 57 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 Sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.5, connected to earthing test point complete including testing on completion all as specified. incl taking down old unsv earthing complete all as specified directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender