Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #58469332

Tender For Special Repairs To One Goods Lift And One Passenger Lift At Teesta Building (N-23) At installation Netaji Subhas Kolkata Under Ge(I)(Cg&N) Kolkata

Issued by Statutory Bodies & Commissions/Committees · Kolkata, West Bengal
Tender Value
29 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repairs To One Goods Lift And One Passenger Lift At Teesta Building (N-23) At installation Netaji Subhas Kolkata Under Ge(I)(Cg&N) Kolkata

BOQ

Name of Work:- SPECIAL REPAIRS TO ONE GOODS LIFT AND ONE PASSENGER LIFT AT TEESTA BUILDING (N-23) AT INS NETAJI SUBHAS KOLKATA UNDER GE(I)(CG&N) KOLKATA
Sl. No. Item Description
1Supply and fixing automatic stainless steel (Grade 304) center opening car door operating mechanism suitable for clear opening width of 800 mm to 1000 mm, complete with AC VVVF / PMSM door drive motor, door controller, belt drive, car door panels (minimum 1.2 mm thick stainless steel hairline finish), hangers, safety track, door lock mechanism, bottom sill (extruded aluminium/brass), threshold, infrared full-height multi-beam light curtain sensor, interlocks, wiring, and all related fixing accessories,including taking down old one complete, all as specified and as directed by Engineer-in-Charge.
2Supply and fixing automatic landing door mechanism suitable for clear opening width 800 mm to 2000 mm , comprising stainless steel (Grade 304, minimum 1.2 mm thick) hairline finish door panels, door frames/fascia, landing door header, hanging rollers, pick-up assembly, landing door locks with electrical and mechanical interlocks, emergency unlocking release key mechanism, landing extruded aluminium/brass sill, counterweights/re-closing springs, and fixing brackets, complete with all accessories,including taking down old one all as specified and as directed by Engineer-in-Charge.
3Supply, fixing, testing, and commissioning of microprocessor-based simplex/duplex selective collective lift controller panel enclosed in minimum 1.2 mm thick sheet steel cubicle (IP-54 enclosure), integrated with Variable Voltage Variable Frequency (VVVF) closed-loop AC motor drive of required rating and capacity, complete with input/output filters, phase protection, braking resistor, overload, over-voltage, single phasing, reverse phasing protection relays, control transformers, terminal blocks, auxiliary control relays, contactors, and necessary software programming, complete,including taking down old one all as specified and as directed by Engineer-in-Charge.
4Supply, installation, testing, and commissioning of Automatic Rescue Device (ARD) of adequate capacity and rating, designed to bring the lift smoothly to the nearest landing floor and open the doors automatically in the event of main power supply failure, complete with maintenance-free valve-regulated lead-acid (VRLA) / lithium battery bank, built-in trickle/float charger, inverter circuit, auto-sensing & safety interlocks, status indicators, and control cabling, complete,including taking down old one all as specified and as directed by Engineer-in-Charge.
5Supply and fixing 13 mm diameter steel wire rope for lift suspension/traction of construction 8 × 19 class (steel core) conforming to IS 2365 / IS 14665, tensile grade not less than 1770 N/mm², including cutting to required lengths, reeving over traction sheave and pulleys, termination with wedge-and-socket or thimble rope end attachments, clamps, equalizing springs, and adjusting tension,including taking down old one complete, all as specified and as directed by Engineer-in-Charge
6Supply and fixing flush-mounted Landing Operating Panel (LOP) on wall/door frame, comprising stainless steel (Grade 304, minimum 1 mm thick hairline finish) face plate, micro-stroke illuminated vandal-resistant tactile push buttons with Braille markings, dynamic digital floor position and direction indicator (7-segment / dot-matrix / TFT display), landing call buzzer, terminal connectors, and internal wiring, including taking down old one complete, all as specified and as directed by Engineer-in-Charge.
7Supply and fixing full-height / standard flush-mounted Car Operating Panel (COP) inside car cabin, comprising stainless steel (Grade 304, minimum 1 mm thick hairline finish) face plate, micro-stroke luminous push buttons with Braille markings for all floors, illuminated door-open and door-close push buttons, alarm button, emergency stop switch, digital floor position and directional indicator (7-segment / dot-matrix display), key switch for attendant/independent operation, toggle/rocker switches for light and fan, overload warning display with buzzer, and two-way intercom/hands-free communication speaker unit, including taking down old one complete, all as specified and as directed by Engineer-in-Charge.
8Supply, laying, suspending, and connecting flat flexible PVC-sheathed copper conductor 12-core travelling cable (minimum 0.75 sq. mm nominal area per core) for lift service, conforming to IS 14665 / IS 9968 (Part 2), flame-retardant (FR/FRLS) grade, supported with high-tensile flexible strain-bearing steel support cores/cords, complete with heavy-duty suspension clamps, junction boxes at car and machine room/well mid-point, and termination lugs,including taking down old one complete, all as specified and as directed by Engineer-in-Charge.
9Supply, laying, suspending, and connecting flat flexible PVC-sheathed copper conductor 4-core travelling cable (minimum 0.75 sq. mm nominal area per core) for lift service, conforming to IS 14665 / IS 9968 (Part 2), flame-retardant (FR/FRLS) grade, supported with high-tensile flexible strain-bearing steel support cores/cords, complete with heavy-duty suspension clamps, junction boxes at car and machine room/well mid-point, and termination lugs, complete,including taking down old one all as specified and as directed by Engineer-in-Charge.
10Repairing, re-routing, and re-wiring of lift shaft/well electrical and control circuits, by taking out damaged/faulty wires and replacing with single-core / multi-strand flexible copper conductor PVC-insulated FRLS wire 1100 V grade of required size 0.75 sq. mm) drawn through existing / new rigid steel conduits or PVC casing-capping, including testing and tagging of connections at all floor junction boxes, limit switches, and safety switchesincluding taking down old one , complete, all as specified and as directed by Engineer-in-Charge.
11Supply, installation, testing, and commissioning of geared traction machine complete set suitable for 2000 kg (2.0 Ton) goods lift, comprising high-torque AC induction hoist motor (415 V, 3-Phase, 50 Hz, class 'F' insulation) coupled to worm-reduction gearbox with high-grade phosphor bronze gear and hardened alloy steel worm shaft, electro-magnetic dual disk/shoe fail-safe DC brake unit with manual brake release lever, heavy-duty grooved cast-iron traction sheave,vibration-damping rubber isolation pads, bedplate/structural steel base channels, and foundation fasteners,including taking down old one complete, all as specified and as directed by Engineer-in-Charge.
12Supply, installation, testing, and commissioning of geared traction machine complete set suitable for 8-passenger (544 kg) elevator, rated for operating speed 1.0 m/s , comprising energy-efficient low-noise AC motor (415 V, 3-Phase, 50 Hz) coupled to precision worm reduction gearbox, electro-mechanical fail-safe DC braking mechanism, cast-iron traction sheave, heavy-duty structural steel bedplate with anti-vibration rubber isolation pads,including taking down old one complete, all as specified and as directed by Engineer-in-Charge.
13Supply and fixing complete passenger lift car cabin suitable for 8 passengers (544 kg capacity), fabricated with minimum 1.2 mm thick stainless steel sheet (Grade 304 only) panels with hairline / decorative etched / mirror finish combination, mounted on rigid structural steel car sling/frame with safety gear assembly and car guide shoes; ceiling fitted with stainless steel false ceiling having energy-efficient LED recessed downlights and forced-air blower/cross-flow ventilation fan; flooring provided with minimum 2.0 mm thick heavy-duty anti-skid PVC sheet flooring / chequered matting laid on marine plywood sub-base; stainless steel tubular/flat handrails (Grade 304) on side and rear walls, full-width/half-height bevelled mirror on rear wall, complete with all safety interlocks, top-of-car inspection box, and accessoriesincluding taking down old one , complete, all as specified and as directed by Engineer-in-Charge.
14Providing and fixing heavy-duty goods/freight lift car cabin suitable for 2000 kg (2.0 Ton) payload, fabricated with minimum 1.2 mm thick stainless steel sheet (Grade 304) hairline finish wall panels with heavy-duty structural steel framework reinforcement; flooring provided with minimum 4.5 mm thick MS / Aluminium chequer plate firmly secured over steel sub-frame; car roof equipped with heavy-duty structural roof platform, recessed LED illumination luminaires, exhaust fan/blower, protective steel wire mesh, bumper crash guards/rub rails of stainless steel / seasoned hardwood along three walls to prevent cargo impact damage, guide shoes, safety gear blocks, and all necessary hardware fixtures,including taking down old one complete, all as specified and as directed by Engineer-in-Charge.
15Supply and fixing MCB DB TPN double door type suitable for MCB TPN incomer including taking down old one complete, all as specified and as directed
16Supply and fixing MCB TPN 32 Amps , 10 KA capacity including taking down old one complete, all as specified and as directed
17Supply and fixing of one number PVC insulated and PVC sheathed / XLPE power cable 1.1 kV grade of size 16 sq.mm, 4-core, surface fixed to wall / ceiling / column or structural steel work with approved hot-dip galvanised iron (GI) / MS clamps or saddles spaced at intervals not exceeding 50 cm, including rawl plugs, wooden plugs / dash fasteners, GI screws, washers, and necessary dressing,incl taking old one complete, all as specified and as directed by the Engineer-in-Charge.\\"
18Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as requiredincl taking old one complete all as specified and as directed.
19M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth leadusing galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated incl taking old one testing on completion.
20Providing and fixing 32 mm X 6 mm G.I. strip as earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc.incl taking old one as required complete all as specified and as directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469332
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 29 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs To One Goods Lift And One Passenger Lift At Teesta Building (N-23) At installation Netaji Subhas Kolkata Under Ge(I)(Cg&N) Kolkata
Basic Detail
Tender No 8701/31/2026-2027/E8
Bidding Type Tender
Location
City Kolkata
State West Bengal
Key Dates
Publish Date 10 Nov 2026
Submission Date 01 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 29 Lakhs
Tender Fee 500
EMD 58000
Exemption Available
Document List
154942e4-2f14-4dad-a77c-9554eec88c89.html
BOQ_895263.xls
newtender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

154942e4-2f14-4dad-a77c-9554eec88c89.html

xls

BOQ_895263.xls

pdf

newtender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender