Defence Statutory Bodies & Commissions/Committees Closing in 1 days TDR #58469331

Tender For special Repair Of Roof Sheet, Flooring (Kota Stone), Joinery, Doors And Windows With Door Frame, Roof Treatment And Other Misc Works In Bldg No P-7 At Dinjan Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Tinsukia, Assam
Tender Value
34.40 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
68800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair Of Roof Sheet, Flooring (Kota Stone), Joinery, Doors And Windows With Door Frame, Roof Treatment And Other Misc Works In Bldg No P-7 At Dinjan Mil Stn

BOQ

Name of Work:- SPL REPAIR OF ROOF SHEET, FLOORING (KOTA STONE), JOINERY, DOORS AND WINDOWS WITH DOOR FRAME, ROOF TREATMENT AND OTHER MISC WORKS IN BLDG NO P-7 AT DINJAN MIL STN
Sl. No. Item Description
1Dismantling of (corrugated or semi corrugated ) sheets in roof covering complete all as specified and as directed.
2S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
3S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges etc , fixed with self tapping screwscomplete all as specified and as directed.
4S&F 0.56mm Thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length andgirth as fixed) complete all as specified and as directed.
5Taking down cement plaster including racking out joints hacking for key, scrubbing down with water as complete all as specified and as directed.
6M&L for rendering 15 mm thick on Fair face of External walls of brick surface in two layers (10 mm and 5 mm thick)in cement mortar in 1:4 using water proofing compound in top layer (Water proofing compound measured separately) complete all as specified and directed.
7M&L for rendering 10 mm thick on brick wall the fair face CM 1:6 finished even and smooth without using extra cement all as specified and as directed.
8M&L for Rendering 5mm thick in CM 1:3 to fair face of brick works or concrete surfaces of ceiling surfaces complete all as specified and as directed.
9Supply only WPC of approved make all as specified and as directed.
10M&L for preparation of new plastered or unplastered surface of wall and applying three coats of white wash etc complete all as specified and as directed.
11M&L for preparation of new plastered or unplastered surface of wall and applying two coat of distemper oil emulsion over a coat of clearcholle primar complete all as specified and as directed.
12M&L for preparation of New plastered or unplastered surface of wall and applying two coat of cement base paint over a coat of 3mm thick wall care putty on wall complete all as specified and as directed.
13M&L for preparation of new plastered or unplastered surface of ceiling and applying three coats of white wash etc complete all as specified and as directed.
14M&L for preparation of old plastered or unplastered surface of wall and applying two coat of distemper oil emulsion over a coat of clearcholle primar complete all as specified and as directed.
15M&L for preparation of old plastered or unplastered surface of wall and applying three coats of white wash etc complete all as specified and as directed.
16M&L for preparation of old plastered or unplastered surface of ceiling and applying three coats of white wash etc complete all as specified and as directed.
17M&L for preparation of old plastered or unplastered surface of wall and applying two coat of cement base paint over a coat of clearcholle primar complete all as specified and as directed.
18Demolition of brick work in cement mortar or cement lime mortar complete all as specified and as directed.
19M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortor 1:4 etc. complete all as specified and as directed.
20M & L brick work with sub class -B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4. complete all as specified and as directed.
21Demolition of cement concrete (un reinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.
22M&L for providing 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection and paving finishing the surface even and smooth without using extra cement complete all as specified and as directed.
23M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone agg) as in floor finish etc complete all as specified and directed.
24M&L for hard core of broken stones of guage not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
25M&L 75 mm thick PCC 1:4:8 Type D-2 (Using 20 mm Graded aggregate) as sub base complete all as specified and as directed.
26M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry 1:4 in floors with white cement and pigment complete all as specified and as directed.
27M/L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) Ditto, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed ®as in foundation , mass concrete. all as directed.
28M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
29S&F Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 all as specified and as directed.
30Dismantling wall and ceiling boards ( fibre , pulp, insulation etc ) or insulation boards/ slabs/ blankets , any thickness , including cover fillets.
31M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long, grid 605mm x 605mm with Anodised aluminium snap grid frame work for false ceiling including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws incl two coat of white wash complete all as specified and directed.
32Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing the rubbish off the premises complete all as specified and as directed.
33M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. over 10 mm thick back coat of cement mortar in (1:6), set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.
34M&L for glazed ceramic, coloured tiles of size 450X 300X 7 mm thick , on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortar (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
35M&L for vitrified ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed.
36M&L for granite stone slab (of any type) 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed or bedding in cement mortor (1:6) and cutting, polishing complete all as specified and as directed.
37M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
38M & L for Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick cement screed base laid in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed
39M & L for Machine cut kota stone slab flooring 20-25mm thick in riser of step over 10 mm thick cement screed base laid in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed
40Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and as directed.
41MS TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinfocemetn complete all as specified and as directed.
42Use and waste formwork to soffits of suspended slab such as roof slabs,floor slabs,landings and similar work:not exceeding 200mm thick (Horizontal or sloping)rough finished surface of concrete complete all as specified and as directed.
43M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in slab supported on walls,beam and columns in floors,roofs,landings,balconies,canopies,deck slab and in shelves complete all as specified and as directed.
44M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate in Manholes covers set in CM 1:4 incl dismantling old RCC cover complete all as specified and as directed.
45Taking down chowkats or frame exc 1.5 sqm but n exc 4 (without taking off shutters from the frame) all as specified and as directed removing from site but with shutters with out takings off the shutters from the frame.
46Taking down chowkats or frame n exc 1.5 sqm with shutter (with out taking off shutter from frame) all as specified and remooving from site.
47Taking down Shutters of any description n exc 1 sq. m each all as specified and as directed.
48Taking down Shutters of any description but exc 1 sq. m and n exc 2 sq. m each
49Refixing of Shutters of any description but exc 1 sq. m and n exc 2 sq. m each all as specified and as directed.
50M & L Pressed steel frames of sizes 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete, providing mild steel 6 mm dia threshold bar complete all as specified and directed by Engineer in Charge.
51M & L Pressed steel frames of sizes 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete, providing mild steel 6 mm dia threshold bar complete all as specified and directed by Engineer in Charge.
52S&F MS FI 25X3mm size as in hold fast complete all as specified and as directed.
53M&L for PCC 1:3:6 type C1 as in hold fast blocks incl. necessary form work complete all as specified and as directed.
54M&L for 2nd class hard wood plain , solid straight chowkats and frames , wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.
55S&F 35 mm thick, 2nd class hardwood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete as specified and directed.
56S&F 30 mm thick skeliton/gauzed shutter open rebated and prepared to receive glass gauged etc(with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), supplied and fitted to chowkats.
57S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suplying and fixing in opening as per specification & drawing complete all as specified and as directed.
58S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site complete all as specified and as directed
59M & L for 18/19 mm thick pre laminated Particle board,exterior grade,pre laminated one side with decorative coloured choice lamination & and other side balancing white, fixed with nails to timber framework incl external teak wood lippings 6mm thick fixed with nails complete all as specified and directed.
60M&L for 12mm thick pre laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame in repairs as cupboard shelve and shutter, incl external teak wood lippings 6mm thick fixed with nails complete all as specified and directed (Kitchen cup board Wall Hanging & covered bottom shelf of cooking platform).
61S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.but of anodised aluminium alloy all as specified and as directed.
62S&F Aluminium anodised Tubular towel rail 20mm dia complete all as specified and directed.
63S&F 100mm size butt hinges, Extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,type B-21 fixed in rpair and brass/bronze pin is provided in lieu of mild steel hinge pin all as specified as directed.
64S&F 75mm size butt hinges, Extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,type C-22 fixed in rpair and brass/bronze pin is provided in lieu of mild steel hinge pin all as specified as directed.
65S&F 125mm size aluminium handle cast type anodised complete.
66S&F 100mm size aluminium handle cast type anodised complete.
67S&F 150 mm long aluminium anodised barrel tower bolt of extruded section conplete.
68S & F 125 mm long aluminium anodised barrel tower bolts, stove enamelled black, with bright bolt and fixed.
69S & F Hasp and staple, safety type, brass with aluminium anodised hinge pin including bolt to hinge plate and fixed with screws Complete all as specified and as directed.
70S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty and wooden beads in square n.exe 0.50sqm in each pane all as specified.
71S&F Door closer hydraulically regulated, designation No. 3, universal type, suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg Aluminium die cast body fixed In repair all as per specified and as directed.
72S&F 3.00mm thick sheet of frosted glass ordinary quality and glazing with oil putty and wooden beads in square n.exe 0.50sqm in each pane all as specified and as directed.
73S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
74S & F Aluminium anodised frame for door , window and ventilator with one or more rebates including joining cleat for fixing etc with power coating complete all as specified and as directed.
75S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.
76Supplied only 5.5mm sheet glass , ordinary quality in squares exc 0.5 Sqm each pane complete all as specified and as directed.
77Galvanised mild steel wire cloth0.56mm nominal diaof wire and average width ofaperture 1.18mm complete all as specified and as directed.
78M&L preparation of new steel surface surface any description not otherwise described and over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
79M&L preparation of old steel surface surface any description not otherwise described and over 10cm width or girth applying two coats of synthetic enamel paint complete all as specified and as directed.
80M&L preparation of new wooden surface any description not otherwise described and over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
81M&L preparation of Old wooden surface any description not otherwise described and over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
82Dismantling water tanks and removing to store Exc 250 & n.exc 500 Ltrs complete all as specified and as directed.
83S&F Rotational moulded polye thylene water storage tanks 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.
84S&F in repair 20 mm bore, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and as directed.
85S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white with \\"P\\" or \\"S\\" Trap front or back inlet fixing bolts, PVC seat cover complete and making all necessary connection complete all as specified and as directed.
86S&F in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.
87S&F in repair for Vitreous China wash basin, white, flat back, size 630 X 450mm, (excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
88S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
89S&F 600 mm x 450mm bevelled edge mirror with glass shelf assembly of selected quality glass , mounted on 6 mm thick Ac Building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed
90S&F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed.
91S&F in repair 15mm bore Bib taps, cast copper alloy,but fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
92S&F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
93S&F LDPE pipe as waste pipe 32 mm dia wash basin /sink complete all as specified and as directed.
94S&F in repairs cast iron floor/Nahani trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B-1 including removing old traps complete all as specified and as directed.
95S&F in repairs cast iron floor/Nahani trap with grating 100mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B-1 including removing old traps complete all as specified and as directed.
96S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
97S&F in repairs 15mm bore stop valve fancy type chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.
98S & F CP angle valve/concealed of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore incl add if fixed in repairs complete all as specified and directed.
99Demolition and breaking up to 100mm bore drain pipes including fittings (AC/PVC) set in cement mortar complete all as specified and as directed
100Demolition and breaking up to 75mm bore drain pipes including fittings (AC/PVC) set in cement mortar complete all as specified and as directed
101S&F 110 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints laids in trenches or in floor, etc complete all as specified and as directed.
102S&F 75 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and as directed.
103S&F 110 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and as directed.
104S&F 75 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints laids in trenches or in floor, etc complete all as specified and as directed.
105S&F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.
106S&F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.
107S&F 110 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and as directed.
108S&F 75 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and as directed.
109S&F 110 mm bore, PVC (SWR) vent cowl fixed with solvent cement complete all as specified and as directed.
110S&F in repair for 75 mm dia PVC SWR vent cowl complete all as specified and as directed.
111Material and Labour for cutting into existing manholes for connecting new drains, making good to pipe and plastering the disturbed portions in CM 1:3 to match with surround surfaces, cutting out existing benching and forming branch channel (1/2 round or ¾ round section) in cement concrete 1:2:4 type B-1 finished smooth and reforming benching as required for 100/110 mm bore pipe complete all as specified and as directed by Engineer-in-Charge .
112Taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.
113Taking up or down 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.
114Supply, laying, connection and testing, 15mm bore (concealed), steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.
115Supply, laying, connection and testing, 20mm bore, (concealed) steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.
116Supply and laying of 16mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling (concealed),or laying in floors complete all as specified. tranches complete all as specified and directed.
117Supply and laying of 20mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling(concealed), or laying in floors complete all as specified. tranches complete all as specified and directed.
118S&F for 16mm dia CPVC Brass thread elbow complete all as specified and as directed.
119S&F for 20mm dia CPVC Brass thread elbow complete all as specified and as directed.
120S&F for 16mm dia CPVC Brass thread Tee complete all as specified and as directed.
121S&F for 20mm dia CPVC Brass thread Tee complete all as specified and as directed.
122S&F for 16mm CPVC Brass thread union complete all as specified and as directed.
123S&F for 20mm CPVC Brass thread union complete all as specified and as directed.
124M & L Water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed:- (a) Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100m & n.exc.250m. (b) M&L For 20-25 mm thick plastering in cement mortar 1:4 finished even & smooth. (c) M&L For 10-15 mm thick screed bed in 1:6 finished even and smooth. (d) Preparing & cleaning of fully dried cement plastered surface. (e) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming IS-3384 (f) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (g) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm.
125Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed .
126Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.
127Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refix it after repair all complete as directed/specified. Please Enable Macros to View BoQ information
128Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refix it after repair all complete as directed/specified. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469331
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 34.40 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair Of Roof Sheet, Flooring (Kota Stone), Joinery, Doors And Windows With Door Frame, Roof Treatment And Other Misc Works In Bldg No P-7 At Dinjan Mil Stn
Basic Detail
Tender No C/8173/E8
Bidding Type Tender
Location
City Tinsukia
State Assam
Key Dates
Publish Date 10 Nov 2026
Submission Date 23 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 34.40 Lakhs
Tender Fee 500
EMD 68800
Exemption Available
Document List
378c9dfc-4055-46dc-a185-b29b0a93ee75.html
BOQ_895265.xls
downloads.htm.crdownload
RETENDERFINAL8173.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

378c9dfc-4055-46dc-a185-b29b0a93ee75.html

xls

BOQ_895265.xls

htm

downloads.htm.crdownload

pdf

RETENDERFINAL8173.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender