Tender For Provision Of Weather Protection/Covered Shed And Boom Barrier At Entrance Gate Of Cgre Manicktala And Provision Of False Ceiling And Miscellaneous Works At Cg House, Manicktala Under Ge(I) (Cg&N) Kolkata
Tender Value
45 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
16 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Weather Protection/Covered Shed And Boom Barrier At Entrance Gate Of Cgre Manicktala And Provision Of False Ceiling And Miscellaneous Works At Cg House, Manicktala Under Ge(I) (Cg&N) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixed hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 2 | M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 290 (Gde E- 165) complete all as specified and as directed. |
| 3 | M&L for preparation of new surfaces and applying two coats of synthetic enamel paint over a one coat of red oxide Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and as directed |
| 4 | Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(a) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal placescomplete all as specified and as directed |
| 5 | M&L for Granite (of any type) work of 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars, win- dow-cills, cooking plat- forms and like over screed bed 20 mm thick in cement mortar (1:4) including point- ing in white cement (1:2) us- ing marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed |
| 6 | S & F automatic boom barrier of length 6 m telescopic openining time 6 sec, boom type straight , 90 degree, voltage 220 V DC , motor power 80w , working tempreture-35 degree C to 60 degree c , protection grade IP54, remote control, photo beam sensor & RFID enabaled all other details as per manufacture instruction. complete all as specified and as directed by engineer in charge |
| 7 | S & F electro mechanical single side spike barrier of 6mtr length of mild steel body with electromechanical mechanism , spike diemension 100 to 120 mm with load capacity 50 ton , spike to spike distance 100 mm centre operation through push button switches, body width 1000 mm and body length 6000 mm (clear opening 5500 mm) with manual operation clutch key, control panel ISO 9002 & CE certified, operated with single phase motor 350 watt all other details as per manufacture instruction. complete all as specified and as directed by engineer in charge |
| 8 | S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 9 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified all as specified. |
| 10 | S & F for PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and as directed. |
| 11 | M & L for 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 12 | S & F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed. |
| 13 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 14 | M & L for Sheet glass 6.3 mm thick , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed by Eng-in-charge. |
| 15 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 16 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 17 | S&F 3D decorative sheet of 8-10mm thick of 8ft *3ft size pvc material and fixed over particle board on wall with suitable method as specified and directed by Eng-in-charge. |
| 18 | M & L for point wiring in PVC casing caping/conduit for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit and making good the distrubed surfaces as per the existing complete all as specified and as directed.Note: A. Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.B. The Rate of point wiring includes the following :- (i) Copper wire (ii) PVC Conduit with accessoreis (iii) Chase cutting |
| 19 | All as per item No 18 above but for one three pin socket outlet 5 amps on independent board complete all as specified and directed. Please Enable Macros to View BoQ information |
| 20 | All as per item No 18 above but for one three pin socket outlet 5 amps on independent board complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender