Tender For Repair To Flooring, Roof, Joinery, Plumbing, Sanitary Fittings And Other Misc Work At Temp/ Permt Accn And Repair/ Replacement Of Certain E/M Items, Painting & Polishing And Repair To Misc Furniture Of Unit 247 Under Ge Narangi
Tender Overview
Project Description
Tender for Repair To Flooring, Roof, Joinery, Plumbing, Sanitary Fittings And Other Misc Work At Temp/ Permt Accn And Repair/ Replacement Of Certain E/M Items, Painting & Polishing And Repair To Misc Furniture Of Unit 247 Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed. |
| 3 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed. |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed. |
| 6 | Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed. |
| 7 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed. |
| 8 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed. |
| 10 | Taking up or down 15mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 11 | Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 12 | Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed. |
| 13 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 15 | Hacking out old broken glass (any thickness, size, quality or description) from wooden /Steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and as directed. |
| 16 | M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 17 | M&L for screed bed 10 mm thick in CM 1:3 mixed with water proofing compound to receive roof tratement etc complete all as specified and as directed. Notes: WPC shall be measured and paid seperately under relevant item |
| 18 | M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.00kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer @ 0.30 Litr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of aluminum paint on top @ 0.10 litre/sqm incl taking down existing HP tiles or any other treatment etc complete all as specified and as direted. |
| 19 | M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed. |
| 20 | M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed. |
| 21 | M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 22 | M&L for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed. |
| 23 | M&L for Rendering 10 mm thick in CM 1:3 for backing coat of tiles / dado etc complete all as specified and as directed. |
| 24 | M&L for joint Free Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 25 | M&L Glazed ceramic tiles (coloured) in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed. |
| 26 | M&L for joint Free Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 27 | All as per item no 26 avove but as in vertical surface etc complete all as specified and as directed. |
| 28 | M&L for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round etc complete all as specified and as directed. |
| 29 | M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and directed. |
| 30 | M&L for Pre-polished Rubber Moulded glossy finished pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade, ISI approved to match with grey cement and pigment etc complete all as specified and as directed. |
| 31 | M&L Brickwork (Old size Brick)with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed. |
| 32 | M&L for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate but in landings,cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work and set in CM 1:6 etc complete all as specified and directed. |
| 33 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed. |
| 34 | M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 35 | M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 36 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately |
| 37 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 38 | S&F Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed. |
| 39 | S&F Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed. |
| 40 | M&L for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed. |
| 41 | S & F for solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold the doors properly for a long life) |
| 42 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 43 | S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 44 | Supply and fixing factory made uPVC white coloured, Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. Comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 45 | M&L Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed. |
| 46 | S&F in repair 150mm long Double action spring hinges, mild steel with steel wire spring, stoveenamelled, black fixed to wooden or steel frame etc complete all as specified and as directed. |
| 47 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed. |
| 48 | Supply and fix in repairs stain-less steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 49 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed. |
| 50 | S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed. |
| 51 | S&F Brass barrel tower bolt 200 mm long of extruded section etc complete all as specified and as directed. |
| 52 | S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed. |
| 53 | S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed. |
| 54 | S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed. |
| 55 | S&F in repairs Floor door stopper (Overall length of cover plate 140mm) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floo etc complete all as specified and as directed. |
| 56 | S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. |
| 57 | S&F in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed. |
| 58 | S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 59 | S&F in repairs PVC flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed. |
| 60 | S&F in repairs 15 mm dia bore Brass CP Brass mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 61 | S & F in repairs 15 mm pillar (Fancy type ) taps tall body chromium plated cast copper alloy fancy type complete all as specified and as directed. |
| 62 | S&F in repairs 100mm (4\\") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. |
| 63 | S & F in repairs 15mm angle cock CP (Fancy type) cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . |
| 64 | S&F in repairs chromium plated Fancy type long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. |
| 65 | S&F in repairs 15 mm dia bore Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed. |
| 66 | S & F in repairs Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed. |
| 67 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 68 | S & F in repairs 600x450 mm bevelled edge mirror of selected quality glass 5-6 mm thick,mounted on 6mm thick AC building board/commercial plywood/PVC sheet 3mm thick and fixed to wooden flugs with chromium plated brass screws and cup washers complete all as specified. |
| 69 | S&F in repairs Unbreakable (Square) wall mounted shelf 500mm etc complete all as specified and directed. |
| 70 | S&F in repair kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed. |
| 71 | S&Fin repairs 0.85 mm thick stainless steel kitchen plate rack of size 786mmx610x254mm including fixing with Rawal plug and screw complete all as specified and as directed. |
| 72 | S&F GI Tubes, 15 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 73 | S&F GI Tubes, 20 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 74 | S&F rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed. |
| 75 | S & F in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 76 | S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 77 | S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls /Floors etc complete all as specified and directed. |
| 78 | S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls /Floor etc complete all as specified and directed. |
| 79 | S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed. |
| 80 | S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed. |
| 81 | S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed. |
| 82 | S&F 75 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 83 | S&F 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 84 | S&F in repairs stainless steel decorative curtain rod (SS-304 Grade) of 25 mm dia x 1.2mm thick (weight not less 0.70 Kg/mtr) incl fancy finial end caps cap (02 nos in each curtain rod) of Satin/Brushed SS or mirror polished having round, ball, dome or other other decorative profile etc complete all as specified and as directed. |
| 85 | S&F in repairs Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed. |
| 86 | S&F in reapirs 18mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, Kitchen shelves and modular kitchen shutter, shelves, drawers etc over 0.90 mm thick decorative laminate type 1, of surface finish (both side of shutter), colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed. |
| 87 | M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed. |
| 88 | Complete removal exising treatment (External/Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed. |
| 89 | M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 90 | M&L for Preparing Old plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 91 | M&L for preparing newely plastered surface of ceiling and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 92 | M&L for preparing Old surface of ceiling and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 93 | M&L for preparation old plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed. |
| 94 | M&L for preparation new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed. |
| 95 | M&L Cutting chases, pinning in, making good to facingsin brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed pipe line etc. and making good, cutting exceeding 20cm girth etc complete all a specified and as directed. |
| 96 | M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 97 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, includingfixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed by Engineer-in-Charge. |
| 98 | M&L Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed. |
| 99 | All as per item No.98 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed. |
| 100 | All as per item No.98 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board complete all as directed. |
| 101 | All as per item serial No.98 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches complete all as directed. |
| 102 | All as per item No.98 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly. |
| 103 | M&L Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conduit conclead with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed. |
| 104 | All as per item No.103 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed. |
| 105 | All as per item No.103 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board complete all as directed. |
| 106 | All as per item serial No.103 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches complete all as directed. |
| 107 | All as per item No.103 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly. |
| 108 | S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed. |
| 109 | S&F Bell push switch, flush type, 5 Amps 230 volt complete all as directed. |
| 110 | S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed. |
| 111 | S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as directed. |
| 112 | S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as directed. |
| 113 | S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed. |
| 114 | S&F lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed. |
| 115 | S&F stepped type electronic fan regulator, two module size, flush type complete all as directed. |
| 116 | S&F Ding Dong AC. 230 volts,single pole complete all as directed. |
| 117 | Supply and fix in repair modular fan regulator,120 W, 2 module complete all as directed. |
| 118 | S&F in repair modular switch 1 way 6 amp, 1 module complete all as directed. |
| 119 | S&F in repair modular switch 1 way 16 amp, 1 module complete all as directed. |
| 120 | S&F in repair modular socket, 6 Amp 2/3 pin combined, 2 module complete all as directed. |
| 121 | S&F in repair modular socket, 16 Amp 2/3 pin combined, 2 module complete all as directed. |
| 122 | S&F in repair modular Bell push 6A, 1 module complete all as directed. |
| 123 | S&F in repair modular white cover plate with frame, 1 module complete all as directed. |
| 124 | S&F in repair modular white cover plate with frame, 2 module complete all as directed. |
| 125 | S&F in repair modular white cover plate with frame, 3 module complete all as directed. |
| 126 | S&F in repair modular white cover plate with frame, 4 module complete all as directed. |
| 127 | S&F in repair modular white cover plate with frame, 6 module complete all as directed. |
| 128 | S&F in repair modular white cover plate with frame, 8 module complete all as directed. |
| 129 | S&F in repair metal flush box 1/2 module for modular switches complete all as directed. |
| 130 | S&F in repair metal flush box 3 module for modular switches complete all as directed. |
| 131 | S&F in repair metal flush box 4 module for modular switches complete all as directed. |
| 132 | S&F in repair metal flush box 6 module for modular switches complete all as directed. |
| 133 | S&F in repair metal flush box 8 module for modular switches complete all as directed. |
| 134 | M&L for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 135 | Supply and fixing in repair batten type LED light fitting 1x 20W, 220V,AC decorative type with internal SPD upto 4kV and overload voltage protection upto 440V including flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 136 | S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 137 | M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I. |
| 138 | Taking down ceiling fans 1400 /1200 mm sweep ,sealing cable end ,dismantling blade & removing the same and refixing on same location or other location of any type/make and size carefully from fan hook, and transporting from any location in side army area to MES E/M store yard and back after repairing complete all as specified and directed. |
| 139 | M & L for painting of ceiling/exhaust fan complete with blades ,in situ with synthetic enamel paint by spraying including filling cavities with filler ,ones coat after cleaning all dust etc.complete all as per directed by Eng-in -charge. |
| 140 | Rewinding Ceiling fan by cutting the existing copper winding of ceiling fan 1200/1400 MM capacity and make any type with super enamelled copper wire of suitable size incl all insulating materials varnishing and neating complete incl satisfactory testing of fan on full load to entire satisfaction of Engineer-in-Charge complete all as specified and directed. |
| 141 | S&F in repairs fan bearing of size 6201/6202 suitable for ceiling fan 1200/1400mm sweep complete all as directed. |
| 142 | Supply only rubber reels incl shackle clamp, bolts, nuts, washers split pins of appropriate size as required complete all as specified and directed. |
| 143 | Supply only down rod made of 15mm dia GI pipe heavy duty 45 cm long incl machining/ threading/drilling hole of size suitable for nuts and bolts washer and split pin suitable for any size and make of fan complete all as specified and directed. |
| 144 | Supply only plastic canopy upper & lower of any size and make of ceiling fan fixed with suitable size of screws complete all as specified and directed. |
| 145 | Taking down heavy duty mettalic exhaust fan of size 200mm to 450mm sweep of any make and refixing on same location or other location carefully from site & transporting from any location inside Army area to MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body and painting as suitable colour etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of EIC complete all as directed.Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch 'A' as Supply only. (ii) The cost of taking down unserviceable parts included in this item. |
| 146 | Rewinding the armature for 200 to 450mm Heavy Duty mettalic exhaust fan any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing complete all as specified and directed. |
| 147 | S&F in repairs ball bearing of size suitable for exhaust/wall fan upto 450 mm sweep all as directed. |
| 148 | S&F in repairs for condenser ISI marked 230/240/250 volts AC 4 MFD suitable for exhaust fan incl condenser spacer and soldering of condenser wire to fan wire and fixing complete all as directed. |
| 149 | S&F in repair/ replacement of unsv fan capcitor 2.5 Mfd suitable for 1200/1400mm sweep ceiling fan complete all as directed. |
| 150 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 151 | Supply and fixing in repairs round shape 12 watt 220 volts AC surface/ recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 152 | S&F in repair/replacement LED 40/45 W post top made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection suitable for dia upto 60mm complete all as specified and directed. |
| 153 | S&F in repair/replacement for factory made, sheet steel distribution boards, TPN, 4 Way, double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 154 | Supply fix in repair/replacement MCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 155 | Supply fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as directed. |
| 156 | S&F in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) |
| 157 | S&F in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) |
| 158 | S&F in repair for MCCBs 415 V, 16 KA, 4P, 63 Amps complete all as directed. |
| 159 | S&F in repair/replacement MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified. |
| 160 | M&L for wiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 161 | Supply and fixing in repair LED building security light/street light of capacity 60 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT=5700±300,IP66,impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection upto 10kV including connection with PVC insulaed PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to ceiling rose. |
| 162 | Supply and fixing LED flood light of capacity 50 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have LED efficacy≥100 lumens/watt,CRI>70 PF 0.95,CCT≥5500,IP66,impact resistance IK 07 ,inbuilt 5kV surge protection device including taking out old unserviceable luminare complete all as specified and directed. |
| 163 | Supply and fixing in repairs street light bracket made of GI pipe 40 mm bore light grade(bend to shape) , 1.5 metre long and fixed with Ms flat iron clamp(clamp shall be 40 X 5mm ), nuts, bolts and washers on pole complete all as specified and directed. |
| 164 | Supply & Laying in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade 3.5/4.0 core XLPE(FRLS) , armoured, electric power cables (heavy duty) with aluminium conductor of the 25 sqmm 3.5 core Note : The rate quoted inclusive of cable glands with suitable aluminium lugs whereever required and taking down of old unsv cable any size. |
| 165 | Supply & Laying in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade 3.5/4.0 core XLPE(FRLS) , armoured, electric power cables (heavy duty) with aluminium conductor of the 50 sqmm 3.5 core Note : The rate quoted inclusive of cable glands with suitable aluminium lugs whereever required and taking down of old unsv cable any size. |
| 166 | Excavation in trenches n.exc 1.5mtr wide and n.exc. 1.5m in depth for foundation and getting out in soft/loose soil complete all as directed. |
| 167 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 168 | M&L for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified. |
| 169 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as directed. |
| 170 | Removing of excavated soil not exc 50cm & depositing where as directed at a level n.exc 1.5m above starting point complete all as directed. |
| 171 | M&L for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors,including taking down rusted one complete all as speciffied and as directed. |
| 172 | M& L for Manual boring under roads/hard standing by reqd T&P without disturbing the top surface of the road for throughing the cable in GI Pipe of n exc 80 mm dia all as specified and directed. |
| 173 | Polishing description:M&L preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying French polish to get the glossy finish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture as specified. |
| 174 | Chair Dining (FD-228, 262, 270, 279 & 285) |
| 175 | Chair writing (FD-280) |
| 176 | Chair Easy (FD-201 & 229) |
| 177 | Table Peg (FD-277 & 384) |
| 178 | Table Centre (FD-274, 267 & 393) |
| 179 | Teapoy wooden (FD-278 & 382) |
| 180 | Table 3'x2' with drawer (FD-283) |
| 181 | Table 3'x2' without drawer (FD-284) |
| 182 | Table dining 4’ x 3’ (FD/MAP-II/03) |
| 183 | Table dining 6 person (FD-269, 273 & FD/MAP-II/03) |
| 184 | Table dining 8 person (FD-273 & FD/MAP-II/03) |
| 185 | Table writing (FD-249 & 275) |
| 186 | Table 3x3 wooden (FD-88 & 291) |
| 187 | Bed with plytop (FD-246 & 247) |
| 188 | Table dressing gents (FD-230, 379 & FD/E6/MAP/14) |
| 189 | Table Office clerk wooden (DB-4120) |
| 190 | Trestle SR Wooden (DB-4101) |
| 191 | Painting of Steel Furniture :M&L for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as per requirement |
| 192 | Almirah Large Steel with shelves both side (outside and inside). FD-67,FD-1031 |
| 193 | Almirah Medium Steel with shelves both side FD-67,350,1032 |
| 194 | Locker Steel both side FD-1029 |
| 195 | Book case steel both side FD-1028 |
| 196 | Bed hard steel FD/E6/MAP/08 |
| 197 | Charpoy IP Hard Top. FD/MAP-II/01 |
| 198 | Chair CB steel with arms FD-75M |
| 199 | Table Office Clerk Steel FD-84,FD-1004 |
| 200 | Table 3’x2’ Steel with drawer and without drawer. FD-1007,1008 |
| 201 | Table Dining OR. FD-165 |
| 202 | Chair Varandah white colour FD-359 |
| 203 | Trestle SR Iron FD-86 (M) |
| 204 | Almirah/Locker repair |
| 205 | M&L for removing old unserviceable existing handle and S&F new chromium plated handles including necessary nut, bolts, washer etc for Almirah Large Steel/ Almirah Medium Steel complete all as specified. |
| 206 | M&L for removing unserviceable lock from Almirah Medium Steel/ Almirah Large Steel and S&F new 6 lever brass lock with duplicate keys complete all as specified. |
| 207 | M&L for taking out old unserviceable handle of Locker Steel and S&F new chromium plated handles including necessary nut, bolts, washer etc. complete all as specified. |
| 208 | M&L for removing unserviceable Hasp and Staple and S&F new set of Hasp and Staple complete with screw, nut, washer etc. complete all as specified. |
| 209 | M&L for removing existing shelves and making the same in functioning condition including necessary nuts, bolts, clits and washer etc of Almirah Large Steel/ Almirah Medium Steel all as directed. |
| 210 | Repairs to Table |
| 211 | M&L for removing old unserviceable lock of drawers of Table office officer steel/ Table office clerk steel and S&F new brass lock with four levers and duplicate keys. (Drg No. FD-1004,1003) |
| 212 | M&L for removing existing drawers of Table office officer steel/ Table office clerk steel/ Table 3' x 2' steel and re-fixing the same after necessary setting of drawers for free movement all as directed. (Drg No. FD-1004, 1003, 1008) |
| 213 | M&L for removing old unserviceable channel and S&F new telescopic channel of size 10/12 inch in computer table. FD/E6/Map/03, FD/E6/Map/15, TP) |
| 214 | M&L for taking out unserviceable round lock and S&F new round lock with two keys in tables as per trade pattern. TP, FD/E6/Map/03) |
| 215 | S&F PVC/Rubber shoe of Tables as per drg (Drg No. FD-1003, 1004, 1007 to 1008) |
| 216 | Replacement of PVC seat back from chair varandah (FD/E6/Map/15) |
| 217 | Replacement of TOP: Taking out unserviceable top from Table and S&F new top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg. |
| 218 | Table office clerk steel. (Drg No. FD-1004) |
| 219 | Table of size 3’x2’ with or without drawer. (Drg No. FD-283,284,1007,1008) |
| 220 | Table Peg (FD-277 & 384) |
| 221 | Table Centre (FD-274, 267 & 393) |
| 222 | Teapoy wooden (FD-278 & 382) |
| 223 | Table dining 4’ x 3’ (FD/MAP-II/03) |
| 224 | Table dining 6 person (FD-269, 273 & FD/MAP-II/03) |
| 225 | Table writing (FD-249 & 275) |
| 226 | REPAIRS TO CHARPOY GI PIPE PLYWOOD TOP FD-220 |
| 227 | M&L for tightening of charpoy frame, check nuts, elbow and removing old unserviceable plywood/MDF board from Charpoy GI and S&F of new BWR grade, ISI marked ply of size 1980X900x12 mm thick, fixed with 08 Nos of suitable round headed nut bolts and washer as approved in each charpoy through suitable drill machine holes of appropriate size, two on each short and long rail and S&F 02 Nos of angle iron stiffners of size (900x25x3mm) duly painted black complete all as directed. |
| 228 | M&L for removing of old Long Rail of Charpoy GI and S&F new long rail of 32mm dia GI pipe, medium grade, ISI marked duly threaded both sides as required. |
| 229 | M&L for Conversion of Long Rails of Charpoy GI Pipe ( retrieved under Item No. 7.02) into Short Rail by cutting/ finishing to shape & threading and replacing the same as required against unserviceable short rail. |
| 230 | M&L for Conversion of Short Rails ( retrieved under Item No. 7.03) into Leg by cutting/ finishing to shape & threading and replacing the same as required against unserviceable short rail. |
| 231 | M&L for removing old unservieable Elbow from Charpoy GI and S&F new 32mm bore, 3 ways, ISI marked, medium grade GI elbow complete all as directed. |
| 232 | M&L for removing old unserviceable check nut from Charpoy GI and S&F new 32mm bore, 6mm thick, galvanised iron, medium grade check nut complete all as directed. |
| 233 | Repair to Charpoy IP Hardtop Drg- FD/Map-II/01 |
| 234 | M&L for removing of old unserviceable Long Rail of Charpoy IP Hardtop and S&F new long rail of 65 x 25 x1916 mm rectangular pipe 16 Gauge IISI marked along with welding of supports and short rail to make it perfect frame of Charpoy. The replaced part shall be smoothened duly removing welding spots and painting black enamel paint after applying redoxide coat. All as per drg and directed. |
| 235 | M&L for removing of old unserviceable Head/Foot board assy of Charpoy IP Hardtop and S&F by welding new assy of size as per drawing. The replaced part shall be smoothened duly removing welding spots and painting black enamel paint after applying redoxide coat. All as per drg and directed. Drg- FD/Map-II/01 |
| 236 | M&L for removing of old unserviceable support stiffner of Charpoy IP Hardtop and S&F by welding new support stiffner of size as per drawing. The replaced part shall be smoothened duly removing welding spots and painting black enamel paint after applying redoxide coat. All as per drg and directed. Drg- FD/Map-II/01 |
| 237 | Fixing of rubber Shoe in Charpoy IP Hardtop. Drg- FD/Map-II/01 Note- 04 Nos in one Charpoy will be measured as one unit. |
| 238 | M&L for removing of old unserviceable ply wood of Charpoy IP Hardtop and S&F new BWR grade, phenol bounded, commercial plywood with the help of nut, bolts including suitable washer as per drg and directed. Drg- FD/Map-II/01 Please Enable Macros to View BoQ information |
| 239 | M&L for removing of old unserviceable ply wood of Charpoy IP Hardtop and S&F new BWR grade, phenol bounded, commercial plywood with the help of nut, bolts including suitable washer as per drg and directed. Drg- FD/Map-II/01 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender