Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58469303

Tender For Addn /Altn To Various Airmen Billets With Allied Work Services At Af Stn Kalaikunda Under Ge (Af) Kalaikunda

Issued by Statutory Bodies & Commissions/Committees · Medinipur West, West Bengal
Tender Value
4375
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Addn /Altn To Various Airmen Billets With Allied Work Services At Af Stn Kalaikunda Under Ge (Af) Kalaikunda

BOQ

Name of Work:- ADDN /ALTN TO VARIOUS AIRMEN BILLETS WITH ALLIED WORK SERVICES AT AF STN KALAIKUNDA UNDER GE (AF) KALAIKUNDA
Sl. No. Item Description
1Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings of any size and any description , at height upto 18m with all scaffolding and all necessary safety measures.
2S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick(AZ 150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
3S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
4M&L 1.00mm thick Plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing complete all as specified and as directed.
5Dismanting of wrought iron or mild steel work af any description not otherwise provided for complete all as specified and as directed.
6S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde E-250 Quality A)
7Fabrication & Fixing only for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as specified and as directed.
8M&L preparation of new or previously untreated steel or iron surfaces of any description over 10cm in girth or width not otherwise described and applying one coat of red oxide , zinc chrome primer and two coats of synthetic enamel paint.
9M&L preparation of old surfaces including complete removal of existing treatment on steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
10Taking down eaves, gutter and rain water pipe any size or pattern including all fittings complete all as specified and as directed.
11S&F PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints fixed to walls
12S&F PVC (SWR) bends/Tee/Socket any radius 150mm dia
13S&F mild steel flat iron as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts etc and similar small articles conforming to Fe-290 Gde-E-165.
14Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles
15M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed
16Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc
17M&L 10mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement as specified.
18M&L rendering 15 mm thick on fair faces of brick or concrete surfaces with cement mortar 1:4 mixed with liquid water proofing compound @ 0.25% by weight of cement or as per manufacturer instruction and finishing the surface even & smooth without using extra cement complete all as specified and as directed. Note:- Liquid water proofing comound shall be measured & paid separately
19Supply only Liquid Waterproofing Compound
20M&L preparation of newly plastered/putty wall surfaces and applying two coats of acrylic distemper 1st quality over a coat of alkali resistant primer complete all as specified and as directed.
21M&L Preparation of New surface of walls, chajja, facia and applying two coat of Exterior emulsion paint (weather coat) over one coat of primer complete all as specifed and as directed.
22M&L applying a coat of 1.5mm thick wall care putty(premium quality) over plastered surfaces of walls to prepare the surface even and smooth, at any height including all necessary scaffolding and safety measures complete all as specified and as directed.
23Taking down existing roof felt including plaster of any description carefully from existing roof /parapet without disturbing wall surface and removing the same at a distance exc 1.5 Km complete all as specified and as directed.
24Demolition of unrefinforced cement concrete as in Concrete of any description and complete in any position not otherwise specifically provided for all as specified and as directed.
25Taking down and refixing the aluminium/copper earthing strips in same position with and including all new fittings and fixtures complete all as specified and as directed.
26M&L cutting chases,pinning in stone concrete block or slab wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, sheleves, lintels,etc and cutting chases for concealed water tubing or concealed conduct wiring,etc and making good,cutting n.exc 10cm girth, complete all as specified and as directed.
27M&L cutting chases,pinning in Brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,sheleves,lintels,etc and cutting chases for concealed water tubing or concealed conduct wiring,etc and making good,cutting exc 10cm but n.exc 20cm girth, complete all as specified and as directed.
28M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in coping, benching at junction of roof and parapet wall finished fair and even complete all as specified and as directed.
29M&L providing plain cement concrete with Nano filler 1: cement 1; sand 2: aggregate 4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed.Note : (i) Minimum thickness of PCC shall be 30mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after (iii) PCC shall be laid to acheive true slope towards the drain/weep holes.
30M&L applying a coat of Nano technology based water proofing compound (1 part powder : 1 part liquid), of desired consistency with nylon brush @ 5 sqm/kg coverage over vertical/horizantal surface of RCC roof and parapet complete all as specified and as directed.
31M&L Water Proofing:a) Surface Preparation - Mild Chipping of the surface, Clean the Surface with Nano Bio wash.b) If onlinr leackage found seal with Nano magic and apply nano Bond coat.Open the cracks by making ‘V’ groove, filling cracks with Nano Crack Filler.c) Apply Nano carbon baesed shorter chain Nano Bond Coat d) Providing and applying Nano Water Base Water Proof compound one coats after surface preparation using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing rate above 98% and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 75degree , permeable type with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT.e) If ant crack found open and fill the crack with nano carbon base filler and bond coat.and use nano wall filler to reduce the undulation.f) Apply Nano high penetration Bond coat two coat.g) Providing and applying Nano Barrier Coat Paint/ Nano Water Base Water Proof Paints 2 coats over screed concrete using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat.
32Supplying and Fixing Wind Driven Turbo Ventilator in 24” neck diameter. AL-SS-304 Turbo Ventilator Fan (Top, Bottom in SS -304, Blade in 0.5 MM thick Aluminium, Internal fitting in SS-304, Rivet in Aluminium) with 2.0 MM thick FRP Base Plate (standard profile) in the size of 5.5 feet length and 3.5 feet width and as directed by Eng-in-charge.
33Excavating over areas manually in soft/loose soil, n exc 1.5 m deep and getting out as directed by Engineer-in charge
34Dismantling of floor, hearth or wall tiling,granite, Kota stone etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
35M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed.
36M&L Rendering 10mm thick in cement mortar 1:3 finished even and fair on vertical surfaces on walls for fixing of dado / skirting tiles
37M&L Machine cut kota stone slab flooring 20-25mm thick over bedding layer 20mm thick cement in cement mortar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
38M&L plain Cement concrete in foundation filling and mass concrete type C-2 1:3:6( 40 mm graded aggregate) complete all as specified and as directed.
39M&L plain Cement concrete in foundation filling and mass concrete type D-2 1:4:8( 40 mm graded aggregate) complete all as specified and as directed.
40M&L Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed
41S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to walls and ceiling or laid in floors.
42S&F in repair for 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
43S&F in repair Vitreous China wash basin in repair, wlite, flat back, size 580x450 excluding taps, waste, chain and plug and porcelain stopper but including brackets.
44S&F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
45S&F in repair 32 mm dia Waste coupling of CP (half or full threaded). (Minimum weight 32mm-45gms/40mm-60 gms) for WHB
46S&F in repairs high density polyethylene pipe(HDPE), 32 mm dia for WHB or sink complete all as specified and as directed.
47S&F in rapair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed by Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each, complete all as specified and as directed.
48S&F in repair for 15 mm stop valve, fancy type , Chromium plated for iron pipe of 15mm bore of pipe .
49S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm.
50Demolition of Reinfoced cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed
51M&L RCC with type B-1 (1:2:4) (using 20mm graded aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and in shelves and the like. complete all as specified and as directed.
52Formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick (Horizontal or sloping) and making flat rough finished surfaces of concrete .
53M&L TMT bars 10 mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed.
54M&L plain Cement concrete type C2 ( 1:3:6) ( 40 mm graded aggregate) used as surface channel & drain.
55S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls
56S&F PVC (SWR) bends/Elbow/socket etc of 110mm dia complete all as specified and as directed.
57Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.
58S&F point wiring with 1.5 Sqmm FRLSH multi stranded copper conductor 1100 V grade,as per IS 694: 2010 , ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, including all accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable duly painted with aluminium paint inside and anticorrosive paint out side with 2.8 mm thick bakelite hylam sheet cover, ISI marked with CM/L no. for mounting switch & sockets for the following:-
59All as per item 58.00 above, but for one Light/Fan point controlled by one, way switch.
60All as per item 58.00 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .
61All as per item No 58.00 above, but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point
62All as per item No 58.00 above, but using 4.0 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for industrial socket.
63S&F switch piano single pole flush type 5 amps, 230 volts.complete all as specified and directed.
64S&F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and directed.
65S&F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and directed.
66S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.
67Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.
68S&F for Sub main wiring with two run of single core (1 phase) PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor, FRLSH cable drawn in with and including PVC casing capping not less than 32 mm ISI marked including all accessories of casing caping including one run of PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed by EIC. ( 2 x 6.0 sqmm + 1 x 6.0 Sqmm earth wire).
69All as per Item No 68.00 above, but of size 4 Sqmm 3 core for single phase phase, Neutral and Earth. ( 2 x 4.0 sqmm + 1 x 4.0 Sqmm earth wire).
70Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.
71S&F sheet metal enclosure for VT DB TPN, MCB DB TPN 4 way (with provision for MCCB as INCOMER and MCB as out going), Confirming to IS as per IEC 61439-3, IP 43,double door suitable for MCCB as incomer (Vertical type double door, 63 Amps MCCB rate inclusive) including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing complete all as specified and directed.
72S&F of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 125 Amps of breaking capacity 25 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.
73S&F in replacement of sheet metal enclosure double door distribution board single pole and neutral, 8 way 240 volt with 200 amps rated bus bar complete with bus and neutral link including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with completed all as specified and directed.
74All as per item No 73.00 above, but of 4 Way Double door.
75S&F MCB TPN 63 to 100 Amps ,415 volts, 10 KA , C Series suitable for fixing in MCB DB incl taking down old unserviceable complete all as specified.
76S&F MCB SPN, 32 - 63 Amps , 230 volts 10 KA, C Series suitable for fixing on MCB DB incl taking down old unserviceable complete all as specified.
77S&F MCB SP 6 to 30 Amps 240 volts C Series for fixing on MCB DB's incl taking down old unserviceable complete all as specified.
78S&F LED light fitting 20W, 4ft, 220 volt AC, having colour temperature day light (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate incl taking down old unserviceable complete all as specified and directed.
79S&F Surface/Pendent LED Lighting 40 Watt, suitable for 230V AC, 50 Hz, comprising LED Module with electronic driver, extruded Alumunium housing and suitable diffuser complete with mounting accessories, electrical connection complete.
80S&F heavy duty exhaust fan 450 mm sweep MS body with anti dust painting, 4 blade with heavy duty motor and double ball bearing, 1320 RPM, single phase 230/240 volts copper wounds, Air delivery -1600 CMH complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme complete all as specified and as drected.
81S&F of 32 Amps (2 Pole + Earth) industrial Socket outlet complete with suitable metal Enclosure, surface mounting type complete with suitable terminals and all accessories complete all as specified and directed.
82Disconnecting & taking out defective under ground LT cable from trenches, pole, pipe, floor ,wall etc including bricks ,GI pipes and removing from work site of unserviceable material all as specified and directed.(Excavation/earth work shall be measured & paid separately under relevant item of this schedule)
83Supply, laying ,jointing and testing LT underground electric power cable crossed linked XLPE insulated, two or more core galavanised steel strip or wire armoured / PVC insulated armoured cable heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 4 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts or passing through pipes etc fixing and connecting accessories such as Aluminium cable lugs, cable glands , nut , bolts , washwers etc complete all as specified Note: (Excavation, earth work, sand cushioning, protection brick and pipe shall be measured and paid separately under appropriate items)
84Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.
85Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.
86Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
87M&L river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified and directed.
88M&L laying well burnt old size bricks, fly ash bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified and directed.
89Horizontal boring of holes, under road/ pavement / hard standing etc.,not exceeding 10 Metres in length, in any type of soil, suitable for passing through up to 50 mm bore, galvanised steel tubing,complete all as specified and directed.
90Supplying and fixing Galvanised mild steel pipe /tubing, light grade complete with all fittings of 50 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers as in cable protection complete all as specified and directed.
91M&L in replacement of Earthing complete with galvanised steel earth plate electrode 600×600×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469303
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 4375
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Addn /Altn To Various Airmen Billets With Allied Work Services At Af Stn Kalaikunda Under Ge (Af) Kalaikunda
Basic Detail
Tender No C/8286/E8
Bidding Type Tender
Location
City Medinipur West
State West Bengal
Key Dates
Publish Date 10 Nov 2026
Submission Date 02 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 4375
Tender Fee 500
EMD 87500
Exemption Available
Document List
BOQ_895215.xls
cce25d6f-112e-45de-bedc-5b56a58e07d1.html
TENDERDOCUMENTS_8286.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895215.xls

html

cce25d6f-112e-45de-bedc-5b56a58e07d1.html

pdf

TENDERDOCUMENTS_8286.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender