Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58469296

Tender For Provn Of Bathrooms And Repair Of Certain Toilets At Kv School Hebbal At Hqtc Banglaore

Issued by Statutory Bodies & Commissions/Committees · Bengaluru Urban, Karnataka
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
49726
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Bathrooms And Repair Of Certain Toilets At Kv School Hebbal At Hqtc Banglaore

BOQ

Name of Work:- PROVN OF BATHROOMS AND REPAIR OF CERTAIN TOILETS AT KV SCHOOL HEBBAL AT HQTC BANGLAORE
Sl. No. Item Description
1Demolition of brick work or stone/ boulder masonry/ precast concrete block walling, built in cement mortar including all quoins, pillars etc., disposal of unserviceable materials, debris and rubbish to a distance complete all as specified and as directed.
2Cutting holes into or through stone walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1, exc 150 sqcm but not exc 400 sqcm as required complete all as specified and as directed.
3Material and labour for providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 (Using 20mm graded stone aggregate) and setting in cement mortar 1:6, complete in walls complete all as specified and as directed.
4Material and labour for pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.
5Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.
6Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and as directed.Note: WPC shall be measured and paid separately.
7Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth with out using extra cement complete all as specified and as directed.
8Material and labour for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja, roof projection, shelves etc., and finished even and smooth without using extra cement complete all as specified and as directed.
9Supply only liquid water proofing compound complete all as specified and as directed.
10Material and labour for preparing new plastered surfaces and applying three coat of white wash on surfaces of ceilings complete all as specified and as directed.
11Material and labour for preparing old plastered surfaces and applying two coats of white wash on surfaces of ceilings complete all as specified and as directed.
12Material and labour for preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed.
13Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and including applying 2mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed.
14Material and labour for preparation of old decorated surface of walls including scraping down old paint, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying two coats of distemper oil emulsion on walls complete all as specified and as directed.
15Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
16Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed.
17Material and labour for 40mm thick PCC 1:2:4, type B0 (Using 12.5mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and as directed.
18Material and labour for 100mm thick PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in sub-base layer complete all as specified and as directed.
19Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.09 sqm but not exc 0.11 sqm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed.
20Material and labour for coloured glazed ceramic design tiles 450x300x7-8mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
21Taking down of chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) and removing to or from store complete all as specified and as directed.
22Material and labour for PCC 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) as in hold fast blocks, for pressed steel frames filling, etc., including necessary forms work, moulds etc., complete all as specified and as directed.
23Supply and fix for 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
24Supply and fix for 35mm thick factory made flash shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
25Supply and fix for factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed.
26Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening complete all as specified and as directed.
27Supply and fix for anodised aluminium frame powder coated, for doors, windows, ventilators, partition /fixed type windows, aluminium grill etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed.
28Supply and fix for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.Note: Sheet glass and SS wiremesh shall be measured and paid separately.
29Supply and fix for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including beads complete all as specified and as directed.
30Supply and fix for 4.8mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and as directed.
31Supply and fix for 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.
32Supply and fix for 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
33Supply and fix for 150mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed.
34Supply and fix for 200mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed.
35Supply and fix for 150mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
36Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
37Supply and fix for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
38Supply and fix for floor door stopper of aluminium alloy body and tongue overall length of cover plate 140mm long, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
39Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and as directed.
40Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
41Supply and fix for 40mm dia PVC pipe including all necessary fittings such as elbow, Tee, union, etc., on walls /floor or laying in floors complete all as specified and as directed.
42Supply and fix in repairs 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
43Supply and fix in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
44Supply and fix in repairs 150mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rainwater pipe complete all as specified and as directed.
45Supply and fix for 75mm dia PVC bends with access door complete all as specified and as directed.
46Supply and fix for 110mm dia PVC bends with access door complete all as specified and as directed.
47Supply and fix for 150mm dia PVC bends with access door complete all as specified and as directed.
48Supply and fix for 110mm bore PVC (SWR) junction single (Single 'T') equal or unequal with access door complete all as specified and as directed.
49Supply and fix for 75mm bore PVC (SWR) junction single (Single 'T') equal or unequal with access door complete all as specified and as directed.
50Supply and fix for 110mm dia vent cowl complete all as specified and as directed.
51Supply and fix for 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.
52Material and labour for 75mm bore PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
53Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed.
54Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position after cleaning repairing, and removing all scale dirt and wiping, drying etc., complete capacity not exc1000 liters complete all as specified and as directed.
55Excavation in trenches not exc 1.5m wide and not exc 1.50m in depth for foundations etc., and getting out in hard /dense soil complete all as specified and as directed.
56Supplying and laying of 20mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls, ceilings or laying in floors including all fittings complete all as specified and as directed.
57Supply and fix for brass elbow for 20mm CPVC pipes SDR 11 and plain CPVC SDR 11 with special fittings complete all as specified and as directed.
58Supply and fix for brass Tee for 20mm CPVC pipes SDR 11 and plain CPVC SDR 11 with special fittings complete all as specified and as directed.
59Material and labour for CPVC 20mm dia brass union complete all as specified and as directed.
60Supply and fix for 15mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
61Supply and fix for fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
62Supply and fix for PVC connection 15mm size 450mm long with CP PTMT nuts complete all as specified and as directed.
63Supply and fix for 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building boards on commercial ply wood including provn for hanging clips complete all as specified and as directed.
64Supply and fix for brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with and incl chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed.
65Supply and fix for vitreous china ware wash hand basin white, flat back, size 550x400mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.
66Supply and fix for standard PVC waste pipe 32mm dia for WHB complete all as specified and as directed.
67Supply and fix for PVC flushing cistern 10 ltrs capacity valveless syphonic action type low level, white, with inlet, ball valve float and handle including brackets and flush pipe complete all as specified and as directed.
68Supply and fix for 32mm dia., waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed complete all as specified and as directed.
69Supply and fix for 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and as directed.
70Supply and fix for vitreous china wash down water closet (pedestal pattern, ETWC), white including fixing bolts, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
71Supply and fix for fancy type 15mm bore concealed cock, chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
72Supply and fix for fancy type wall mount SS-304 premium grade stainless steel soap holder /stand size 11.5(l) x 8.5(b) x 5.5(h) cm fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and as directed.
73Supply and fix for CP 2 way bib cock with wall flanges fixed complete all as specified and as directed.
74Supply and fix for CP health faucet including 1m length SS conncting pipe complete all as specified and as directed.
75Supply and fix for in repair vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
76Supply and fix in repair vitreous china squatting plate urinal for girls complete all as specified and as directed.
77Supply and fix in repairs urinal partitions slabs terminating about 40cm above floor line complete all as specified and as directed.
78Supply and fix in repair push tap any colour high pressure of PTMT of 15mm for urinals complete all as specified and as directed.
79Supply and fix for urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60 gms) complete all as specified and as directed.
80Supply and fix for brass chromium plated shower rose 200x200mm size with 300mm long stainless steel arms complete all as specified and as directed.
81Supply and fix for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., not exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed.
82Supply and fix for mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and not exc 15cm long complete all as specified and as directed.
83Material and labour for two coats of synthetic enamel paints over a coat of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described complete all as specified and as directed.
84Supply and fix for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.
85Taking down old damaged existing water proofing membrane of any thickness from roof top and making good at the corners of surrounded wall by proper means complete all as specified and as directed.
86Re-laying of machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade laying, and levelling and re-laying the same tile complete all as specified and as directed.
87Material and labour for sand cushioning including watering for Interlocking tiles complete all as specified and as directed.
88Dismantling structural steel work including doors, gates and similar works but excluding framed truss etc., complete all as specified and as directed.
89Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., complete all as specified and as directed.
90Removing building materials etc., to a distance of 10 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469296
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Bathrooms And Repair Of Certain Toilets At Kv School Hebbal At Hqtc Banglaore
Basic Detail
Tender No 8602/E8
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 09 Nov 2026
Submission Date 30 Nov 2026
Open Date 02 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 49726
Exemption Available
Document List
798d166e-c88c-41c0-b38f-b963f5db9ace.html
BOQ_895142.xls
SOC8602.pdf
Tenderdocuments8602.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

798d166e-c88c-41c0-b38f-b963f5db9ace.html

xls

BOQ_895142.xls

pdf

SOC8602.pdf

pdf

Tenderdocuments8602.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender