Defence Statutory Bodies & Commissions/Committees Closing in 11 days TDR #58469260

Tender For Repair And Maintenance Of External Water Supply System,Ro Plants,Stp Installed At Area B And Comprehensive Repair And Maintenance Of Cooling Appliances And Desert Cooler At Area A B & C Af Stn Wadsar Under Ge (Af) Chiloda

Issued by Statutory Bodies & Commissions/Committees · Gandhinagar, Gujarat
Tender Value
48 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
11 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair And Maintenance Of External Water Supply System,Ro Plants,Stp Installed At Area B And Comprehensive Repair And Maintenance Of Cooling Appliances And Desert Cooler At Area A B & C Af Stn Wadsar Under Ge (Af) Chiloda

BOQ

Name of Work:- REPAIR AND MAINTENANCE OF EXTERNAL WATER SUPPLY SYSTEM,RO PLANTS,STP INSTALLED AT AREA B AND COMPREHENSIVE REPAIR AND MAINT OF COOLING APPLIANCES AND DESERT COOLER AT AREA A B & C AF STN WADSAR UNDER GE (AF) CHILODA
Sl. No. Item Description
1Supply, laying connecting and testing in replacement for the 200mm size of CI (Cast Iron) pipes class LA spigot and socket end pipe class K-9 suitable for and including rubber gasket joints in standard working length conforming to IS-8329 lain in trenches complete all as specified and as directed. Incl taking out old CI/DI pipe line of following bore complete all as specified and directed by Engr-in-Charge. Note :- (i) DI/CI special shall be measured and paid separately under relevant items.(ii) Excavation and earth work shall be measured and paid separately under relevant items.
2All as per items No - 1 above but DI pipe lines complete all as specified and directed by Engr-in-harge of the following size:-
3150 mm bore
4100 mm bore
5Supply and fix in repair CI/DI (Cast Iron/Ductile Iron) fittings like collar joints,tees, bends equal/reduced of size 150/100/ mm bore complete all as specified and directed by Engr-in-Charge.
6M&L for rubber tyton/ Rubber gasket joint for DI/CI pipe for spigot & socket pipe complete all as specified and directed by Engr-in-Charge incl taking out old joint of following sizes:-
7All as per items No - 4 above but for 150mm bore
8All as per items No - 4 above but for 100mm bore
9S & F in repair CI sluice valve, flanged of class PN 1.6 non raising type with stainless steel spindle supplied and installed complete all as specified and directed by Engr-in-Charge incl taking out old Valve of the following sizes:-
10All as per items No - 5 above but for 200mm bore
11All as per items No - 5 above but for 150mm bore
12All as per items No - 5 above but for 100mm bore
13S & F in repair Non Return valve, flanged of class PN 1.6 supplied and installed complete all as specified and directed by Engr-in-Charge of the following sizes :-
14All as per items No - 6 above but for 150 mm bore
15All as per items No - 6 above but for 100 mm bore
16M&L for Cutting CI/DI pipes and reducing to required length before laying pipes in position for insertion of new pipes in replacement/new tees, branches etccomplete all as specified and directed by Engr-in-Charge. Note:- Burning out of lead /tyton joint will be measured & paid separately.of the following size:-
17All as per items No - 7 above but for 150mm bore
18All as per items No - 7 above but for 100mm bore
19Supply and lay in replacement GI tubing medium grade incluidng GI fittings like sockets, elbow, bends, tees , union, short pieces etc. laid in trench complete incl taking down/out old unserviceable complete all as specified and directed by Engr-in-Charge of following size:-Note:- Earth work will be measured & paid separately
20All as per items No - 8 above but for 50mm bore
21All as per items No - 8 above but for 40mm bore
22All as per items No - 8 above but for 25mm bore
23All as per items No - 8 above but for 20mm bore
24All as per items No - 8 above but for 15mm bore
25Supply and fix in replacement GI tubing medium grade incluidng GI fittings like sockets, elbow, bends, tees, union, short pieces etc. for laid/fixing in floor/wall/ceilling etc. complete incl taking down/out old unserviceable complete all as specified and directed by Engr-in-Charge of following size :-
26All as per items No - 9 above but for 50 mm bore
27All as per items No - 9 above but for 40 mm bore
28All as per items No - 9 above but for 25 mm bore
29All as per items No - 9 above but for 20 mm bore
30All as per items No - 9 above but for 15 mm bore
31S & F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge of following size :-
32All as per items No - 10.00 above but for 50mm size.
33All as per items No - 10 above but for 40mm size.
34All as per items No - 10 above but for 25mm size.
35All as per items No - 10 above but for 20mm size.
36All as per items No - 10 above but for 15mm size.
37S & F in repairs GI union fitting 50/40 mm dia medium grade union complete all as specified and directed by Engr-in-Charge.
38All as per item No 11.00 above but socket/nipple/elbow/reducer /tee etc complete all as specified and directed by Engr-in-Charge.
39S & F in repairs GI union fitting 25/20 mm dia medium grade union complete all as specified and directed by Engr-in-Charge.
40All as per item No 13.00 above but socket/nipple/elbow/reducer /tee/end cap etc complete all as specified and directed by Engr-in-Charge.
41S & F in repairs GI union fitting 15 mm dia medium gde union complete all as specified and directed by Engr-in-Charge.
42All as per item No 15.00 above but socket/nipple/elbow/reducer /tee end cap etc complete all as specified and directed by Engr-in-Charge.
43Excavation in trenches not exceeding 1.50m wide and not exceeding 1.5m deep for laying pipe and getting out in soft/loose soil as directed complete all as specified and directed by Engr-in-Charge.
44Returning filling in soft/loose soil including spreading leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engr-in-Charge.
45Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by EIC.
46M & L for boring of holes up to 80 mm dia under road pavement, hard standing, etc by trench- less technology using ultra sound technique complete all as directed by Engineer-in- charge.Note:- Pipe for protection of cable shall be measured and paid separately.complete all as specified and directed by EIC.
47M&L for Cement concrete (1:3:6) type C1 using 20mm grade stone aggregate for necessary form work fair finishing to exposed surface complete all as specified and directed by EIC.
48Demolition of cement concrete (unreinforced) in ground floors and paving, plinth protection n.exc 15cm thickness (below or above ground level) complete all as specified and directed by EIC.
49Testing of Bore well water/RO water/Narmada to analysis the following parameter as per IS 10500:2000 through Govt. approved agency complete all as specified and directed by Engr-in-Charge.a) Physicochemical parameters of water / eflluent sampleb) Bactoriological test of water sample.c) Metals (Expect Hg, As & Se).d) Pesticides.Note:- Water sample for testing shall be arranged by the contractor.
50M&L for Lifting of submersible pump set 45/50 HP from borewell with column pipe of size 80/100 mm bore dia and connecting the column pipes after cleaning of threaded portions and replacement of worn out nuts, bolts attached WR pump set & pipe & coupling lowering the submersible pump with column pipes carefully and put into operation complete all as specified and directed by Engr-in-Charge.Note : Replaced of column pipe will be measured and paid under respective items here in after
51M&L for Lifting of submersible pump set 15HP fixed in underground sump 100000 Gallon capacity with dismantling submersible pump complete with electrical, gasket for flanged pipes, replacement of worn out nuts, bolts attached and put into operation complete all as specified and directed by EIC.
52M&L for Servicing , testing & commissioning of the 45/50 HP submersible pump and motor including rewinding with super enameled copper wire, replacement of neck rings, sleeves bushing , seal complete all as specified and directed by EIC.
53M&L for Servicing , testing & commissioning of the 30 HP submersible pump and motor including rewinding with super enameled copper wire, replacement of neck rings, sleeves bushing , seal complete all as specified and directed by EIC.
54M&L for Servicing , testing & commissioning of the 15 HP submersible pump and motor including rewinding with super enameled copper wire, replacement of neck rings, sleeves bushing , seal complete all as specified and directed by EIC.
55M&L for Servicing , testing & commissioning of the 7.5 HP submersible pump and motor including rewinding with super enameled copper wire, replacement of neck rings, sleeves bushing , seal complete all as specified and directed by EIC.
56S&F in replacement of butter fly valve of size 150 mm dia , PN 1.6, operating angle 90 degree connected with out let of over head tank includes accessories like actuator with suitable size mounted type bracket including control limit switches for open and close condition and splash proof enclosure by oiling, greasing and setting of its machinism as per norms complete incl taking out U/s valve complete all as specified and directed by Engr-in-Charge.
57S&F in replacement of butter fly valve of size 100 mm dia , PN 1.6, operating angle 90 degree connected with out let of over head tank includes accessories like actuator with suitable size mounted type bracket including control limit switches for open and close condition and splash proof enclosure by oiling, greasing and setting of its machinism as per norms complete incl taking out U/s valve complete all as specified and directed by Engr-in-Charge.
58M&L for Cleaning of mud inside Bore well through pressure machine on hired basis from local market complete all as specified and directed by Engr-in-Charge.
59Supply and fixing in replacement UPVC column pipes both ends threaded of 100 mm bore dia heavy duty(each pipe of 3 meters) long as per site requirement complete all as specified and as directed incl UPVC column pipe assecssories as per site requirement complete all as specified and directed by Engr-in-Charge.Make:- Ashirvad/Asstral or as approved by GE.
60S&F in repair flat/round type 3 core copper conductor PVC insulated and PVC sheathed cable 1100 volts grade of size 16 Sqmm all as required at site complete all as specified and directed by Engr-in-Charge.
61M&L for Cleaning of over head RCC reservoir top domb (18 meter) from GL with bleaching powder/non toxic solution throughly including removal of sand , clay silt, or any other foreign material from inside the reservoir of capacity up to 50,000 gallon and applying one coat of lime coating inside the tank and making date of cleaning and capacity of reservoir complete all as specified and directed by EIC.Note:- cleaning should de done once in six month
62All as per item No 35.00 above, but semi underground sump of capacity 100000 gallon at BRD complete all as specified and directed by EIC.
63All as per item No 35.00 above, but SWT UG sump of capacity 50000 gallon complete all as specified and directed by EIC.
64Dismantling of damage/broken valve chamber and M & L for valve chamber made out of brick work of internal size 1200 x 1200 x1200 mm in cement mortar 1:4 including plaster and providing of valve chamber cover made out with MS sheet of 3mm thick with 40 x40x6mm size angle iron frame duly grouted to wall and painting to steel work wilth two coat of synthetic paint over one coat of red oxide primer and locking arrangement complete including earth work etc, complete all as specified and directed by EIC.
65All as per item No 38 above but of 900 x 900 x 900 mm in size.
66All as per item No 38 above but of 600 x 600 x 600 mm in size.
67M & L for fixing of I-25, Pop-up ROTOR type sprinkler having variable adjustable arc (50 to 360 degrees) nozzle capable of covering 14m -18.0 m at 2.5 Bars with discharge rate of 0.02- 0.891Lps.The Rotor body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic with small exposed cover acccessories complete all as specified and directed by Engineer-In-Charge.
68S&F in repair Star Delta Starter thermal overload relay (7- 12 A) and mechanical interlock, phase failure relay Dry run protection, Overload relay complete all as specified and directed by Engineer-In-Charge.
69S&F in repair DOL Starter thermal overload relay (12- 18 A) and mechanical interlock, phase failure relay Dry run protection, Overload relay complete all as specified and directed by Engineer-In-Charge.
70All as per item No 43.00 above but type MNX 95 complete all as specified and directed by Engineer-In-Charge.
71All as per item No 43.00 above but type MNX A1 complete all as specified and directed by Engineer-In-Charge.
72All as per item No 43.00 above but type MNX A2 complete all as specified and directed by Engineer-In-Charge.
73All as per item No 43.00 above but type MNX 32 complete all as specified and directed by Engineer-In-Charge.
74M& L for gland packing of centrifugal pump installed at area B and filling oil to stop leakage water complete all as specified and directed by EIC.
75S&F rubber coupling of centrifugal pump set complete all as specified and directed by Engr-in-Charge.
76S & F in replacement UPVC pipes of dia 20 mm outer dia schedule 40,confirming to ASTM, fixed complete to walls, ceilings or in floors/ in trench etc, complete all as specified and directed by Engineer-In-Charge incl taking out old u/s pipe line of following bore:-
77S & F in replacement UPVC pipes of dia 25 mm outer dia schedule 40,confirming to ASTM, fixed complete to walls, ceilings or in floors/ in trench etc, complete all as specified and directed by Engineer-In-Charge incl taking out old u/s pipe line of following bore:-
78S & F in replacement UPVC pipes of dia 40 mm outer dia schedule 40,confirming to ASTM, fixed complete to walls, ceilings or in floors/ in trench etc, complete all as specified and directed by Engineer-In-Charge incl taking out old u/s pipe line of following bore:-
79S & F in replacement UPVC pipes of dia 50 mm outer dia schedule 40,confirming to ASTM, fixed complete to walls, ceilings or in floors/ in trench etc, complete all as specified and directed by Engineer-In-Charge incl taking out old u/s pipe line of following bore:-
80S&F in repair UPVC Ball Valves size 50mm Complete all as specified and as directed by Engineer in Charge.
81S&F in repair UPVC Ball Valves size 40mm Complete all as specified and as directed by Engineer in Charge.
82S&F in repair UPVC Ball Valves size 25mm Complete all as specified and as directed by Engineer in Charge.
83S&F in repair UPVC Ball Valves size 20mm Complete all as specified and as directed by Engineer in Charge.
84S&F in repairs UPVC fitting 50/40 mm dia union all as specified and directed. complete all as specified and directed by EIC.
85All as per item No 58.00 above but socket/nipple/elbow/reducer /tee etc complete all as specified and directed by Engineer-In-Charge.
86S & F in repairs UPVC fitting 25/20 mm dia union complete all as specified and directed by Engineer-In-Charge.
87All as per item No 60.00 above but socket/nipple/elbow/reducer /tee/end cap etc complete all as specified and directed by Engineer-In-Charge.
88S & F in repairs UPVC fitting 15 mm dia union complete all as specified and directed by Engineer-In-Charge.
89All as per item No 62.00 above but socket/nipple/elbow/reducer /tee end cap etc complete all as specified and directed by Engineer-In-Charge.
90S&F in repair/replacement Electromagnetic flow meter DN 200 (200 mm) with SS316 electrodes,hard rubber liner, PN16 flanged ends,LCD Display, 4-20 mA, pulse and RS-485 outputs, complete with transmitter, cables,earthing rings, gaskets, nuts,bolts and all accessories required for satisfactory operation, complete all as specified and directed by EIC.
91M&L for rectification of leakage from GI/UPVC 15/20/25/40/50 mm size bore pipe line by cutting and removing old lengh of pipe, supply & fix new galvanised iron pipe suitable size bore medium grade connecting with old line by providing necessary ifitting such as socket & union including screwing old & new pipe including all necessary connecting complete all as specified and directed by Engineer-In-Charge. Note :- (i) DI/CI pipe shall be measured and paid separately.(ii) Excavation and earth work shall be measured and paid separately .
92M&L for rectification of leakage from CI/DI 80/100/150/200 mm size bore pipe line by cutting and removing old lengh of pipe, supply & fix new DI/CI 80 mm bore connecting with old line by providing necessary ifitting such as tyton joints,gasket,fittings old & new pipe including all necessary connecting complete all as specified and directed by Engineer-In-Charge. Note :- (i) DI/CI pipe shall be measured and paid separately.(ii) Excavation and earth work shall be measured and paid separately.
93M&L in replacement of UG sump ladder of existing dimensions made of angle iron frame incl paintings steel surface of same with two coats of red oxide primer etc. complete all as specified and directed by EIC.
94S & F in replacement pig lead and lead wool for lead joint of CI pipes installed bottom OHT and various locations complete all as specified and directed by EIC.
95S&F Float valves of size 15 mm bore dia of pipe, high pressure, wiwth polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by EIC.
96S&F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed by EIC.
97Supply, Installation, Testing and Commissioning in repair of 3 phase fully automatic star-delta starter panel MU-G 20 suitable for 15 HP submerseabile pump set including single phase preventor, over load protection etc. including connecting upto LT panel complete all as specified and directed by Engr In Charge.
98M & L preparation of old pipe line of CI,DI or GI surfaces of any description over of size 40/80/100/150 mm bore applying two coats of synthetic enamel paint over a coat of red oxide primer complete with showing arrow in water flowing direction in white colour complete all as specified and directed by EIC.
99M & L for painting the surfaces of pump set with mounting accessories of capacity 5.0 to 30 HP applying one coats of synthetic enamel paint with existing color complete all as specified and directed by EIC.
100M&L in replacement of existing damaged chamber cover with new 3mm thick MS Sheet cover fixed on 40mmx40mmx6mm thick angle iron frame embedded in PCC coping with locking arrangement and mild steel surface with two coats of red oxide primer etc. complete all as specified and directed by EIC.
101Supply only Sodium hypochlorite solution 60-80 GPL in brand packed containeer with mention of CML NO and exp date all as specified and directed. Make:- (ALTOCH-CH), Declibac Tech.(P) Ltd.
102M&L for Lifting of submersible sewage pump and motor set of capacity 2/12.5 HP,from installed at sewage well/lifting well at underground sump capacity with dismantling submersible pump complete with electrical, gasket for flanged pipes, replacement of worn out nuts, bolts attached and put into operation complete and installed the same its own positins after repair/service the same complete all as specified and directed by EIC.
103M&L for Servicing , testing & commissioning of the 12.5 submersible sewage pump and motor including rewinding with super enameled copper wire, replacement of neck rings, sleeves bushing , seal complete all as specified and directed by EIC.
104All as per item No. 77.00 above but 2 HP sewage pump and motor complete all as specified and directed by Engineer-In-Charge.
105All as per item No. 77.00 above but centrifugal pump of capacity 30 HP Treated Motor complete all as specified and directed by Engineer-In-Charge.
106All as per item No. 77.00 above but centrifugal pump of capacity 3/7.5 HP complete all as specified and directed by Engineer-In-Charge.
107S&F in repair 5 HP Submersible Sewage cutter(grinder) pump 3 phase 415 volt, IP 68,Head 15-40m along with control auto level panel installed at lifting well and and plantarings/any other spare/accessories and refixing the same at site all as specified and as directed by EIC.
108M & L for taking out complete pump & motor unit from installed position and rewinding the motor 1.5/2.0 HP capacity , Single/three phase , 50 Hz refixing the same at site complete all as specified and directed by Engineer-In-Charge.
109M & L for rewinding of booster pump 2 HP capacity, three phase, 50 Hz monoblock /coupled centrifugal pump with super enamel copper wire of existing guage with and including replacement of bearings and refixing the same at site all complete all as specified and directed by EIC.
110M & L for serviceing/repair of Blower with motor and compresser unit of capacity 15.0 HP installed at STP. Overhauling the blower unit and replacement of bearings/any other spare/asscessories and refixing the same at site after repaircomplete all as specified and directed by EIC.
111M&L for Electromagnetic diaphram Dosing Pump,capacity 6 LPH at 5 bar,PP/PVDF pump head, PTFE diaphram 230 V AC Single Phase operation, complete with foot valve injection valve, suction and discharge tubing, suitable for STP chemical Dosing application at OMQ-21KLD STP System complete all as specified and directed by EIC.
112M&L for Carbon & Sand Filter Service with Consumable Items like Activated Carbo, Silex, Fine Sand, Pebbles & Gravells with TOP & Bottom Distribution System at OMQ-21KL-STP System complete all as specified and directed by EIC.
113M&L for Installation & Maintenance of All STP Systems- Sintex Man-days Charges at OMQ-21KL STP System complete all as specified and directed by EIC.
114M&L for Electromagnetic diaphram Dosing Pump,capacity 10 LPH at 5 bar,PP/PVDF pump head, PTFE diaphram 230 V AC Single Phase operation, complete with foot valve injection valve, suction and discharge tubing, suitable for STP chemical Dosing application at OMQ-21KLD STP System complete all as specified and directed by EIC.
115M&L for Sludge Cleaning from Equalization Tank (4*5.5*2) at BRD 175KL-STP System complete all as specified and directed by EIC.
116M&L for repairing Air vent system in Carbon Filters at BRD 175KL-STP System complete all as specified and directed by EIC.
117M & L for serviceing/repair of Blower with motor and compresser unit of capacity 3/5 HP installed at STP. Overhauling the blower unit and replacement of bearings/any other spare/asscessories and refixing the same at site after repair complete all as specified and directed by EIC.
118S & F in repair replacement belt of existing size and length installed at STP air blower complete all as specified and directed by EIC.
119M & L for taking out complete pump & motor unit of capacity 1.5/2.0 Hp from installed position overhauling the pump unit and replacement of bearings and refixing the same at site complete all as specified and directed by EIC.
120All as per item No 93.00 above but 3.5/5 HP complete all as specified and directed by EIC.
121Testing of STP water to analysis the following parameter as per IS 10500:2000 through Govt. approved agency:-(a) BOD (b) COD (c) TDS (d) TSS (e) Dissolved Oxygen (f) Residual Chlorine (g) PHNote:- Water sample for testing shall be arranged by the contractor.
122S&F Vaccum hose pipe (Green) flexible 40/50mm dia made out of PVC transparent with jointing adapters complete all as specified and directed by Engineer in Charge.
123M&L in replacement of Sand Pebble Media complete all as specified and directed by Engineer-In-Charge.
124M&L in replacement of Carbon Media complete all as specified and directed by Engineer-In-Charge.
125M&L in replacement of MBBR Media complete all as specified and directed by Engineer-In-Charge.
126M&L in replacement of Tube settler media complete all as specified and directed by Engineer-In-Charge.
127Supply and replacement of gland packing in existing water supply pump, including removal of old/worn out packing, cleaning of stuffing box and shaft sleeve, cutting and fitting of new gland packing rings of suitable size, staggering of joints, adjustment of gland follower, testing and commissioning of pump, complete in all respects as required for proper functioning, including labour complete all as specified and directed by Engr-in Charge.
128Supply and replacement of electric motor-driven fountain water pump, suitable for continuous water circulation, complete with single/three-phase electric motor of required 1.5 HP, 230/415 V, 50 Hz, suitable pump casing and impeller, mechanical seal, bearings, base frame and necessary accessories, conforming to the manufacturer's standard specifications, including testing and commissioning, complete as directed by the Engineer-in-Charge.
129Supply and replacement of 16 sq. mm, 3-core flat submersible cable, comprising flexible stranded electrolytic-grade annealed copper conductors, PVC insulated and PVC sheathed, suitable for operation up to 1100 V, generally conforming to IS 694, for connection of water supply submersible pump motor, complete as required and as directed by the Engineer-in-Charge
130Supply and replacement of 100 mm (4-inch) diameter foot valve, cast iron body, flanged ends, rubber-seated non-return arrangement and strainer, suitable for water supply pump suction line, complete with necessary accessories, conforming to applicable specifications and as directed by the Engineer-in-Charge.
131Supply and fixing replacement of 15 mm nominal bore brass bib cock, heavy-duty type, wall-mounted, threaded connection, with suitable handle and water outlet nozzle, for earth pit chamber, complete with necessary jointing materials, testing for leakage and commissioning, of approved quality and make, as directed by the Engineer-in-Charge.
132Supply of industrial-grade lubricating oil suitable for rotary lobe air blower / compressor installed at the Sewage Treatment Plant, of specified ISO viscosity grade, having anti-wear, anti-oxidation, rust-preventive and anti-foaming properties, compatible with the manufacturer's lubrication requirements, supplied in sealed containers, complete as directed by the Engineer-in-Charge.
133M&L for replacement of 7 AH /12 Volt battery complete all as specified and directed by Engineer-In-Charge.
134Comprehensive maintenance/servicing and testing of RO plant of capacity 600 LPH (15 BRD) including washing, cleaning of sedimentation filter, disinfection process, servicing of pressure pumping set so as to supply qualitative water at permissible level of TDS complete all as specified and directed by Engineer-In-Charge..Note:- (a)Spares required for replacement will measured and paid separately under respective items here-in-this schedule. (b) The rate quoted by the tenderer includes cost of maint / servicing of above said plant once in a period of 30 days till the date of completion of work.(c) Rate inclusive of replacement of parts day during currency of contract as and when directed by Engineer-in-Charge.(d) Servicing should be done by OEM/authorized agency and not by any local mechanic(e) Contractor shall be produce all purchase voucher and test certificate before submitted RAR.(f) Servicing should be done by OEM/authorized agency and not by any local mechanic.
135Supply and fix in repair/replacement of SS 304 multistage high pressure pump, 2HP, 3 phase, 415 Volt Suitable for 600 LPH RO plant complete with motor, coupling and accessories complete all as specified and directed by Engineer-In-Charge.
136Supply and fix in repair/replacement Raw water Motor 2 HP,415 V, 3 phase, discharge capacity 1.5m3/hr at 10-15 bar pressure,complete with motor, base frame and accessories, suitable for 600 LPH RO plant complete all as specified and directed by Engineer-In-Charge.
137Supply and fix in repair RO Membrane housing 'O' ring set complete all as specified and directed by Engineer-In-Charge.
138Supply and fix in repair suitable size FRP vessel 1354/1465 (as applicable) complete all as specified and directed by Engineer-In-Charge.
139S&F and replacement of PP Spun Sediment filter Catridge 20\\" 5 Micron suitable for 600 LPH RO Plant complete all as specified and directed by Engineer-In-Charge.
140Supply and filling Washed quartz gravel/ filter pebbles (3-6mm & 6-12 mm) for pressure sand filter (0.6 to 1.2mm) for 600 Ltr/Hour capacity RO plant complete all as specified and directed by Engineer-In-Charge.
141Supply and filling Activated Carbon Filter Media top-up/replacement for 600 Ltr/Hour capacity RO plant complete all as specified and directed by Engineer-In-Charge.
142S&F in repair RO membrane element size 4040, TFC Polyamide, Suitable for 600 LPH RO plant complete all as specified and directed by Engineer-In-Charge.
143S&F Cation Resin (Food Grade) complete all as specified and directed by Engineer-In-Charge.
144S&F Anti Scalant Chemical complete all as specified and directed by Engineer-In-Charge.
145S&F in repair 20\\" Filter Housing complete all as specified and directed by Engineer-In-Charge.
146S&F in repair 25 mm bore multiport valve for FRP vessel complete all as specified and directed by Engineer-In-Charge.
147S&F in repair PVC Flexible pipe as per site requirement complete all as specified and directed by Engineer-In-Charge.
148S&F in Repair Pressure switch (LP/HP) complete all as specified and directed by Engineer-In-Charge.
149S&F in repair Pressure gauge 0-7 Kg/Cm2 dial size 65 mm complete all as specified and directed by Engineer-In-Charge.
150S&F in repair Pressure gauge 0-40 Kg/Cm2 dial size 100 mm complete all as specified and directed by Engineer-In-Charge.
151S&F in Repair Solenoid valve complete all as specified and directed by Engineer-In-Charge.
152S&F in repair Digital TDS Meter complete all as specified and directed by Engineer-In-Charge.
153S&F in repair 15mm ball valve complete all as specified and directed by Engineer-In-Charge.
154M&L MS Angle Fabrication and painting work complete all as specified and directed by Engineer-In-Charge.
155S&F PVC plastic flexible Crackproof 0.75 inch pipe complete all as specified and directed by Engineer-In-Charge.
156S&F in repair, compressor unit of water cooler, storage type 40/80 litres capacity including necessary cutting, welding complete with all fixing accessories as required complete all as specified and directed by Engineer-In-Charge. Note:- - Leakage testing, flushing of system and charging of gas shall be measured and paid separately under relevant items
157M&L for leakage testing of compressor of water cooler 40/80 ltr capacity by dry nitrogen complete all as specified and directed by Engineer-In-Charge.
158M&L for flushing of the refrigerator system of water cooler 40/80 ltr capacity with dry nitrogen , replacement of capillary tube, strainer and drier of required size and , assembling the system, after applying appropiate vacuum upto (-) 75cm column of mercury, complete all as specified and directed by Engineer-In-Charge.
159M&L for recharging of gas in compressor of water cooler 40/80 ltr capacity with refrigerant gas R- 22/134 (a) as required and testing the water cooler with satisfactory cooling effects after installing at indicated location complete all as specified and directed by Engineer-In-Charge.
160S& in repair thermostate ISI marked for water coolers of 40/80 ltrs capacity complete all as specified and directed by Engineer-In-Charge.
161S&F in repair, Over load relay for water coolers of 40/80 ltrs capacity complete all as specified and directed by Engineer-In-Charge.
162S&F in repair starting capacitor 50 Mfd for water cooler 40/80 ltr capacity complete all as specified and directed by Engineer-In-Charge.
163S& in repair running capacitor 40 Mfd for water cooler 40/80 ltr capacity complete all as specified and directed by Engineer-In-Charge.
164S&F in repair PVC float valve assembly 15mm dia for water cooler 40/80 ltrs capacity complete all as specified and directed by Engineer-In-Charge.
165S&F in repair, push tap assembly 15 mm dia chromium plated for water cooler 40/80 ltr capacity complete all as specified and directed by Engineer-In-Charge.
166M&L for Rewinding of blower motor of water cooler of 40/80 Litres capacity with super enamelled copper wire as per existing gauge including replacement of old bush and ball bearing by new one, complete all as specified and directed by Engineer-In-Charge.
167S&F in repair blower fan motor of water cooler of capacity 40/80 Litres complete all as specified and directed by Engineer-In-Charge.
168S&F, in repair, compressor unit of refrigerator 180 to 310 litres capacity including necessary cutting welding complete with all fixing accessories as required complete all as specified and directed by Engineer-In-Charge. Note - Leakage testing, flushing of system and charging of gas shall be measured and paid separately under relevant items here in after.
169M&L for Leakage testing of compressor of refrigerator 180 to 310 litres capacity by dry nitrogen complete all as specified and directed by Engineer-In-Charge.
170M&L for flushing of the refrigerator system of refrigerator 180 to 310 litres capacity with dry nitrogen , replacement of capillary tube strainer and drier by new one of required size, assembling the system, after applying appropiate vacuum upto (-) 75cm column of mercury, complete all as specified and directed by Engineer-In-Charge.
171M&L for recharging of gas in compresssor of refrigerator 180 to 310 litres capacity with refrigerant gas 134 (A) as required and testing the refrigerator with satisfactory cooling effects after installing complete all as specified and directed by Engineer-In-Charge.
172S&F, in repair, thermostate (defrost type), ISI marked for refrigerators 180 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
173S&F, in repair, cooling chamber as per existing model for refrigerator of 165 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
174S&F, in repair, magnetic door Gasket suitable for refrigerator 180 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
175S&F, in repair, chiiler door suitable for regrigerator 180 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
176S&F, in repair, chiller tray suitable for regrigerator 180 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
177S&F, in repair, vegetable/fruit tray suitable for refrigerator 180 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
178S&F, in repair, Over load relay for refrigerators 180 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
179S&F, in repair, starting capacitor 50 Mfd for refrigerators 180 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
180S&F, in repair, running capacitor 40 Mfd for refrigerators 180 to 310 litres capacity complete all as specified and directed by Engineer-In-Charge.
181S&F, in repair, blower fan motor of 180 to 310 litres capacity Refrigerator complete all as specified and directed by Engineer-In-Charge.
182M & L for Servicing in situ of complete out door /indoor unit of Split type AC 1.5 to 2 TR capacity after removing electric connection by cleaning of condensor coil, evaporator coil, blower & motor, air filter, louver, other connected accessories and replacemement of unserviceable screws, nuts,bolts, washers from the body of the ACs by providing new one and making the same perfectly tight and noiseless during operation complete all as specified and directed by Engineer-In-Charge. Note:- Spare/parts, components required will be measured and paid separately under relevant items here-in-after as supply only.
183Supply only room sensor suitable for Split type /Window type AC of capacity 1.5 TR to 2 TR complete all as specified and directed by Engineer-In-Charge.
184Supply only coil sensor suitable for Split/window type AC of capacity 1.5 TR to 2 TR complete all as specified and directed by Engineer-In-Charge.
185Supply only air filter suitable for split type AC of capacity 1.5 TR to 2 TR complete all as specified and directed by Engineer-In-Charge.
186S&F in repair blower fan motor of Split type AC of capacity 1.5 TR to 2 TR ccomplete all as specified and directed by Engineer-In-Charge. directed
187S&F in repair Power Control board (PCB) complete for 1.5 TR to 2 TR split type AC complete all as specified and directed by Engineer-In-Charge.
188S&F in repair Outdoor unit condenser coil (copper) complete for 1.5 TR split type AC complete all as specified and directed by Engineer-In-Charge.
189S&F in repair Indoor unit cooling coil (copper) complete for 1.5 TR split type AC complete all as specified and directed by Engineer-In-Charge.
190S&F in repair, starting capacitor 50/60 Mfd for split type AC of 1.5 TR to 2.0 TR capacity complete all as specified and directed by Engineer-In-Charge.
191S&F in repair, running capacitor 40/50 Mfd for split type AC of 1.5 TR to 2.0 TR capacity complete all as specified and directed by Engineer-In-Charge.
192S&F in repair, sealed compressor unit for Split type AC 1.5 TR capacity including necessary cutting, welding with all fixing accessories as required Ccomplete all as specified and directed by Engineer-In-Charge. Note - Leakage testing, flushing of system and charging of gas shall be measured and paid separately under relevant items )
193S&F in repair, sealed compressor unit for Split type AC 2 TR capacity including necessary cutting, welding with all fixing accessories as required complete all as specified and directed by Engineer-In-Charge. (Note - Leakage testing , flushing of system and charging of gas shall be measured and paid separately under relevant items ).
194M&L Leakage testing of compressor of Split type AC 1.5 to 2 TR capacity by dry nitrogen complete all as specified and directed by Engineer-In-Charge.
195M&L for flushing of the refrigerator system ie refrigerant coil of evaporator, condensor and interconnecting copper tube of Split type AC 1.5 TR to 2 TR capacity with dry nitrogen flushing upto vacuum (- 75 cm) column of mercury & replacement of old strainer /drier by new one as per existing size, complete all as specified and directed .
196M&L Re-Charging of gas refrigerant R-22 to split type AC of 1.5TR to 2.00 TR capacity on full load, checking automatic cut-out, setting of room temperature and testing complete all as specified and directed by Engineer-In-Charge.
197M & L for Servicing in situ of complete window type air conditioner 1.5 TR to 2 TR capacity after removing electric connection by cleaning of condensor coil, evaporator coil, blower & motor ,air filter , louver ,other connected accessories and replacemement of unserviceable screws, nuts,bolts, washers from the body of the ACs by providing new one and making the same perfectly tight and noiseless during operation complete all as specified and directed by Engineer-In-Charge.Note - Spare/parts components required will be measured and paid separately under relevant items here-in-after as supply only.
198Supply only Multi Capacitor 50 Mfd for Split / window type AC capacity 1.5 TR to 2.00 TR, complete all as specified and directed by Engineer-In-Charge.
199S&F in repair, Power control board ( remote circuit)complete for 1.5 TR to 2 TR window type AC complete all as specified and directed by Engineer-In-Charge.
200Supply only thermostate ISI marked suitable for window type AC capacity 1.5 TR to 2 TR, complete all as specified and directed by Engineer-In-Charge.
201Supply only air filter suitable for window type AC of capacity 1.5 TR to 2 TR ,complete all as specified and directed by Engineer-In-Charge.
202S&F in repair, blower fan motor for window type AC of capacity 1.5 TR to 2 TR, complete all as specified and directed by Engineer-In-Charge.complete all as specified and directed.
203S&F in repair condenser coil (copper) complete for 1.5 TR Window AC complete all as specified and directed by Engineer-In-Charge.
204S&F, in repair, Cooling coil (copper) complete for 1.5 TR Window type AC complete all as specified and directed by Engineer-In-Charge.
205S&F in repair sealed compressor unit for Window type AC 1.5 TR capacity including necessary cutting, welding with all fixing accessories as required complete all as specified and directed by Engineer-In-Charge. ( Note - Leakage testing, flushing of refregerator system and charging of gas shall be measured and paid separately under relevant items ).
206S&F in repair sealed compressor unit for Window type AC 2 TR capacity including necessary cutting, welding with all fixing accessories as required complete all as specified and directed by Engineer-In-Charge.(Note - Leakage testing, flushing of refregerator system and charging of gas shall be measured and paid separately under relevant items)
207M&L Leakage testing of compressor of Window type AC 1.5 to 2 TR capacity by dry nitrogen complete all as specified and directed by Engineer-In-Charge.
208M&L for flushing of the refrigerator system ie refrigerant coil of evaporator, condensor and interconnecting copper tube of Window type AC 1.5 TR to2 TR capacity with dry nitrogen flushing upto vacuum (-) 75 cm column of mercury & replacement of old strainer or drier by new one as per existing size, complete all as specified and directed by Engineer-In-Charge.
209M&L Re-Charging of gas refrigerant R-22 to 1.5TR to 2.00 TR capacity Window type AC on full load, checking automatic cut-out and setting of room temp and testing complete all as specified and directed by Engineer-In-Charge.
210S&F in repair, compressor unit for Deep Freezer capacity 320 Ltr including necessary cutting welding complete with all fixing accessories as required complete all as specified and directed by Engineer-In-Charge.(Note. Leakage testing, flushing of refregerator system and charging of gas shall be measured and paid separately under relevant items )
211M&L for Leakage testing of compressor of deep freezer 320 ltr capacity by dry nitrogen complete all as specified and directed.
212M&L for flushing of the refrigerator system of deep freezer 320 ltr capacity with dry nitrogen and replacement of old capillary tube strainer and drier by new one of required size, assembling the system, after applying appropiate vacuum upto (-) 75cm column of mercury complete all as specified and directed by Engineer-In-Charge.
213M&L for recharging of gas in compresssor of Deep freezer 320 litre capacity with refrigerant gas R-22 as required and testing the deep freezer with satisfactory cooling effects after installing at indicated location complete all as specified and directed by Engineer-In-Charge.
214S&F in repair, over load relay (OLR) for Deep Freezer of 320 Ltrs capacity complete all as specified and directed by Engineer-In-Charge.
215S&F in repair, starting capacitor 100/120 Mfd for Deep Freezer of 320 Ltrs capacity complete all as specified and directed by Engineer-In-Charge.
216S&F, in repair, thermostate suitable for Deep Freezer of 320 Ltrs capacity, complete all as specified and directed by Engineer-In-Charge.
217S&F in repair blower fan motor of Deep Freezer of 320 Litres capacity complete all as specified and directed by Engineer-In-Charge.
218S&F in repair voltage stabilizer of capacity 5 KVA ,220 V for window ac and split AC complete all as specified and directed by Engineer-In-Charge.
219S&F in replacement of fan motor suitable for plastic body desert cooler complete all as specified and directed by Engineer-In-Charge.
220S&F in replacement of fan blade suitable for plastic body desert cooler complete all as specified and directed by Engineer-In-Charge.
221S&F in replacement of submersible pump suitable for plastic body desert cooler complete all as specified and directed by Engineer-In-Charge.Note for Item No 1.00 to 195.00 The contractor shall deploy sufficient number of skilled manpower, equipped with proper tool kits, to attend complaints as directed by JE in charge. Each complaint must be attended and resolved within twenty-four (24) hours of its receipt. Failure to comply shall attract a penalty of ₹500 (Rupees Five Hundred only) per complaint per day, until the complaint is resolved. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469260
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 48 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair And Maintenance Of External Water Supply System,Ro Plants,Stp Installed At Area B And Comprehensive Repair And Maintenance Of Cooling Appliances And Desert Cooler At Area A B & C Af Stn Wadsar Under Ge (Af) Chiloda
Basic Detail
Tender No 8467/26-27/E8
Bidding Type Tender
Location
City Gandhinagar
State Gujarat
Key Dates
Publish Date 09 Nov 2026
Submission Date 30 Nov 2026
Open Date 02 Dec 2026
Finance
Tender Value 48 Lakhs
Tender Fee 500
EMD 96000
Exemption Available
Document List
b59bae38-1636-4714-ac31-8474c7723836.html
BOQ_893573.xls
Tenderdocument8467.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

b59bae38-1636-4714-ac31-8474c7723836.html

xls

BOQ_893573.xls

pdf

Tenderdocument8467.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender