Tender For special Repair To Tech Store And Trg Lab Of 1 Afsr At Af Stn Palam Under Ge (Af) Palam, Delhi Cantt - 10
Tender Value
40.28 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
17 days left
EMD
80600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Tech Store And Trg Lab Of 1 Afsr At Af Stn Palam Under Ge (Af) Palam, Delhi Cantt - 10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement, CGI sheets (corrugated, semicorrugated, etc.) sheets as in roof coverings complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) as in floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | M&L for cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in bed blocks, bed plates, coping etc. including necessary use and waste of form work kerb water troughts and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 5 | Re-fixing only with fabrication for old mild steel work (FE290 Grade E-165) roof trusses (framed), trussed, purlins, crane gantries, rails and heavy bracket framing (beam, Tee, angle, Channel or flat sections) including distance pieces, cleats etc. with and including applying two coats of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 6 | S&F for mild steel angles/rectangular,square hollow sections/steel tubular roof trusses (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. with and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 7 | M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar (1:3) to concealed galvalume sheet and making good complete all as specified and as directed. |
| 8 | S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, fixed with self tapping screws with EPDM sealing washers and properly sealed with silicone/butyl sealent etc. complete all as specified and as directed. Note:- Pattern, design & colour of sheet shall be approved by GE/Engr-in-Charge. |
| 9 | S&F Pre-painted coloured galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, fixed with self tapping screws with EPDM sealing washers and properly sealed with silicone/butyl sealent etc. complete all as specified and as directed. Note:- Colour of sheet shall be approved by GE/Engr-in-Charge. |
| 10 | Taking down and refixing wind ties for roof incuding securing bolts etc. complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L for preparation of old painted steel and iron surfaces of any description not otherwise described over 10cm width and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charege. |
| 12 | S&F plates (plain or chequered) channels, square cut or notched (oridnary and counter sunk) Fe410-W Gde E-250) quality - A forming holes, without any attachment with and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 13 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 45cm long and 11 to 15mm diameter of neck etc complete all as specified and as directed. |
| 14 | M&L for cement concrete (1:2:4) type B1, (using 20mm graded stone aggregate) as in roof kerbs, coving to chajja, haunching to roof, roof padding etc. complete all as specified and as directed. |
| 15 | M&L for 20mm thick machine cut Kota stone slab flooring as in floor, stair case tread, landings laid over and including 20mm thick screed base in CM (1:6) and jointed with grey cement slurry and pointed with coloured cement to match the shade of the slab including rubbing, cutting and bees wax polishing complete all as specified and as directed. |
| 16 | M&L for 20mm thick machine cut Kota stone slab as in riser of steps, skirting, dado and pillar laid over and including 15mm thick rendering in CM (1:4), laid and jointed with grey cement slurry and pointed with coloured cement to match the shade of the slab inlcuding rubbing, cutting and bees wax polishing complete all as specified and as directed. |
| 17 | M&L for Bees-wax polishing on surfaces of previously polished kota stone floor/skirting/staircase of any description and width or girth including cleaning and preparing the existing surface complete all as specified and as directed. |
| 18 | S&F 18 to 20mm thick WPC (Wood Polymer Composite) fluted panels glossy finish surface having size (180mm x 2700mm) stuck on inner frame work of 50mm wide strips of 5mm thick WPC sheet. The strips should have in their centre a groove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10\\" between two WPC strips. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for aesthetic looks. The exact size of the panel and grid may vary depending on the size of wall. Heat band beading at top shall be provided as per manufacturer's instructions complete all as specified and as directed. Note:- (i) The cost of MS tubular grid frame work shall be deemed to be included in the unit rate quoted. (ii) Shade/colour/pattern/fixing design of the panel shall be approved by the GE. |
| 19 | M&L for hardcore of broken stone or boulders gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 20 | M&L for 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 21 | M&L for machine pressed coloured glossy finish chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick with grey cement and no pigment, set and jointed with neat cement slurry and pointed with coloured cement to match over and including 15mm thick screed bed in CM (1:6) over and including 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded aggregate) as in sub base complete all as specified and as directed. |
| 22 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 23 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including raking out joints, hacking for keys, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed. |
| 24 | Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc. of any description including removing debries from site complete all as specified and as directed. |
| 25 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in old size bricks in CM (1:6) complete all as specified and as directed. |
| 26 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in old size bricks in CM (1:6) but except bricks complete all as specified and as directed. |
| 27 | M&L for brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in \\"half brick\\" thick walls built in CM (1:4) complete all as specified and as directed. |
| 28 | M&L for 15mm thick cement plaster on fair faces of brickwork or concrete surfaces with cement mortar (1:6), to be finished even and smooth without using extra cement complete all as specified and as directed. |
| 29 | M&L for 15mm thick rendering using polymer modified ready-mix cement based mortar conforming to IS-1661-1972, IS-2250-1965, IS-2402-1963) applied in ratio (1:4) as per manufacture's instructions on brick or concrete surfaces of walls/damaged irregular surface of chajjas, roof projections, ceiling, facia etc. including finishing surface even and fair without using extra cement complete all as specified and as directed. Make:- Ultratech, Dr. Fixit, Birla (HIL) |
| 30 | M&L for preparation of new plastered surfaces and applying cement base wall care putty 1mm average thick over a coat of alkalic resistance primer and two coats of oil bound distemper complete all as specified and as directed by Engr-in-Charge. |
| 31 | Complete removal of existing treatment from internal surfaces of walls by mechanically and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of (1:3) to obtain smooth regular/even finish using sand paper and including applying cement base wall care putty 1mm average thick and ae coat of alkalic resistant primer and two coats of oil bound distemper on wall etc. complete all as specified and as directed by Engr-in-Charge. |
| 32 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over new or old surfaces of wall including necessary scaffolding required for painting work, safety measures etc. complete all as specified and as directed by Engr-in-Charge. |
| 33 | M&L for RCC nominal mix (1:2:4) type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, chajja, roof beam, roofs, canopies, facia, shelves & the like complete all as specified and as directed by Engr-in-Charge. |
| 34 | Use and waste of formwork to soffits of suspended slab such as roof slabs, chajja, facia, floor slabs, shelve, landings and similar works n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed by Engr-in-Charge. |
| 35 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bendidng etc and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and as directed by Engr-in-Charge. |
| 36 | M&L for granite 18mm thick black/red colour (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge. |
| 37 | S&F collapsible steel gates, top/side hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc. as specified erected in position and securing runners with holdfasts and brackets, including taking down of old gate complete all as specified and as directed by Engr-in-Charge. |
| 38 | Dismantling ceiling board, any size or description, fixed in any position or in any thickness, including cover fillets with nails complete all as specified and as directed. |
| 39 | M&L false ceiling at all height with semi perforated 12mm thick micro tengular edged GRG (Glass Fibre Reinforced Gypsum false ceiling tiles of size (595 x 595)mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS8225:1987, noncombustible as per BS 476 (Part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120grams per Sqm including both sides) comprising of main-T runners of size (15 x 32)mm of length 3000mm, cross-T of size (15 x 32)mm of length 600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hangar rod upto 1000mm length and L-shape level adjuster of size (85 x 25 x 2)mm, Glavanised iron perimeter wall angle of size (24 x 24 x 0.40)mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws complete all as specified and as directed. |
| 40 | Complete repair work only in existing ceiling borad/frame work, any size or description, refixing in frame and ceiling tiles in any position or in any thickness including cover fillets with nails complete all as specified and as directed by Engr-in-Charge. Note:- Rates also includes necessary material in this item like tiles, T-Grid, suspended, galvanised mild steel items, level adjuster of any size etc. as required at site. |
| 41 | M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered or riveted or forged into spikes framed guard bars barred to windows, ventilators, iron door, ladders, framed balusters, walk ways, railing, frame work for water tank and similar work conforming to Fe-290 Gde E-165 including distance pieces, cleats etc. and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 42 | Taking down chowkats or frames of wooden or steel area exc 1.5 sqm & n.exc. 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge. |
| 43 | Taking down chowkats or frames of wooden or steel area n exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge. |
| 44 | S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for door, partition wall etc. with one or more rebates, shutters, grills including joining cleat, glazing clips, rubber packing anodised aluminium snap for fixing glass, 12mm thick particle board etc. complete all as specified and as directed. (Jindal Section No 20048=0.942 Kg/M for door frame, Glazing Clip 19370=0.109 Kg/M, Partiiton section 14066= 1.345 Kg/Rm). |
| 45 | S&F anodized aluminium door shutters aluminium section weighing not less than 0.55kg/m including necessary joining cleat glazing clip, rubber neoprene packing, aluminium handles 2 no in each door, hinges, anodised, door stopper, aluminium tower bolt 1 for each door, 300mm long aluminium sliding door bolt, aluminium snap beading screws etc. complete all as specified and as directed. |
| 46 | S&F 100mm long brass mortice lock, 4 levers vertical type complete all as specified and as directed. |
| 47 | S&F 12mm thick, prelaminated both side cement bonded particle board are to be of wood finish teak shade and conforming to IS-142-1995, (Bison Panels by NCL group, member indian green building council). The composition of the boards comprises of approximately 60% Cement 30% plantation wood (remaining being other chemical/water binders etc.) with a density of approximately 1250-1300Kg/M3, including fixed with scews to aluminium frame work for doors, partitions, cabinets, cupboards, wall panelling, cladding etc. including screws and all screw finish with lambi etc. as per manufacturer's specifications complete all as specified and as directed. Note:- All Bison panels are fixing by self threaded machine screw, 25/38mm as per requirement. The system used together should carry a 10 years warantee. |
| 48 | M&L for sheet tinted glass, selected quality, in squares exc 0.5 sqm each pane 5.5mm thick of approved colour in doors, in partition fixed with and including rubber beading complete all as specified and as directed. |
| 49 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 50 | S&F door closer aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed. |
| 51 | S&F unit insignia embossed (unit symbol) on glass as per sample approve by user unit, door at alley way with one way visibility and fixtured complete and glass partition above shutter to roof level complete all as specified and directed. |
| 52 | S&F aluminium window two openable glass shutters with wire mesh shutters & safety grill factory made aluminium window (openable shutter type) as per TD Drg No. CEDZ/D-316, comprising outer frame of size (40mm x 114mm) x 1.30mm thick, corners 450 cut and mechanically jointed with 6mm allen key bolt clamps; complete with 5mm clear glass, EPDM rubber gasket, metal body hand lever type single point lock and aluminium cobra hinges 2Nos per shutter. Providing 12mm dia SS 202 grade round bar safety grill at 100mm c/c, modified to 150mm c/c in front of handle, welded at both ends with 6mm dia SS 202 grade round bar. Also providing 02 Nos welded wiremesh openable shutters of size (40mm x 18mm) x 1.30mm thick, 450 cut and mechanically jointed with 0.45mm nominal dia SS wiremesh SS 75mm long hinges and PVC magnet. Entire window complete with pure polyester powder coating of approved shade and fixing/installation with silicon complete all as specified and as directed. Make:- M/S DODIA Enterprises or equivalent as approved by GE. Note:- The window shall be of two-leaf openable type with glass shutters and separate wiremesh shutters. It is not a sliding window. The window shall have provision for installation of window AC/desert cooler and the glass shutters, wiremesh, grill and necessary fittigns/locking arrangement shall be modified as per ground requiremnt during execution as directed by the Engr-in-Charge. |
| 53 | S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framed work as in angle chowkats, doors or gates of angle or other section gates with gusset plates, rails, cladding, chowkats/frame or like etc. welding hold fast, hinges complete including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 54 | M&L for mild steel black sheet in door 1.60mm thick as in steel gate and similar work cut to size, holes punched, including round headed, screwed cut nails or revets and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded seams including or turning up, mitred complete all as specified and as directed. |
| 55 | S&F 25mm dia, curtain rails, anodised aluminium alloy with and including fixing decorative brackets, stops, side rollers as required etc. complete all as specified and as directed by Engr-in-Charge. |
| 56 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type etc complete all as specified and as directed. |
| 57 | Taking down ceiling fan / wall mounted fan, dismantling blades & removing fan & blade to MES store yard with proper deposit voucher complete all as specified and as directed by Engr -in- charge. |
| 58 | S&F remote operated BLDC ceiling fans complete with metal blades, copper motor, down rods & accessories 230V of 1200mm sweep, 210 cfm minimum air delivery with service value of 6 BEE and 5 star rated complete all as specified and as directed. Make- Bajaj model No ENERGOS 12DC5R, Havells 1200DC30w350, Crompton Energion Regmote. |
| 59 | Taking down unserviceable sub main wiring with conduits/battens etc complete all as specified and as directed. |
| 60 | Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 sqmm FRLSH (nominal area) IS 694 drawn through non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with GI saddles, GI screws, rawl plugs (concealed conduit/surface wiring in walls or roof) including Tee, Junction boxes and proper fixing of modular switches, sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 sqmm (Nominal area) FRLSH and connected to main earth dolly complete for following all as specified and as directed by Engr-in-Charge:- (a) One light / fan point controlled by one switch one way |
| 61 | (b) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete. |
| 62 | (c) One socket outlet 5 Amp controlled by one switch on independent board. |
| 63 | All as per Srl item No 60.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 sqmm stranded copper conductor cable PVC insulated FRLSH including earth wire 2.5 sqmm copper FRLSH conductor cable connected to earth dolly complete all as specified and as directed. |
| 64 | S&F switch modular 1 way 6 amps suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S&F switch modular 1 way 16 amps suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge. |
| 66 | S&F socket modular 6 amps 2/3 pin combined 2 module suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F socket modular 6/16 amps 2/3 pin combined 2 module suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Supply and fixing ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge. |
| 69 | Supply and fixing wall mounted high speed 300mm with smooth oscillation 230-250 volt complete all as specified and as directed by Engr-in-Charge. |
| 70 | S&F indoor decorative LED battens - integrated type 20 watt 4 feet white 6500K fixture complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and as directed by Engr-in-Charge. |
| 71 | S&F LED luminaire (600mm x 600mm) 35/36 watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 72 | Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed. |
| 73 | Supply and fixing vertical type load line distribution board, double door, 6 way, AC, 3 Phase, 415 volts ,TPN, bus bar 200 Amps rating and earth bus & din rail suitable for MCCB as incomer complete all as specified and as directed. |
| 74 | Supply and fixing MCCB, 3 pole,125A ,16 kA with thermal adjustable magnetic settings, necessary connection including taking out old MCCB complete all as specified and as directed. |
| 75 | Supply and fixing for MCB, SPN, 40-63 A,10kA complete all as specified and as directed. |
| 76 | Supply and fixing for MCB, SP 6-32A,10kA complete all as specified and as directed. |
| 77 | Material and labour for submain wiring with two single core 4.0 sq mm PVC insulated FRLSH multistrand copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 4.0 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engr-In-Charge. Note:- Two core main wire, one core of earthing wire, PVC conduit and cutting chases shall be measured and paid as one run. |
| 78 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amp 'C' series complete all as specified and as directed by Engr–in-Charge. |
| 79 | M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover (320mm x 320mm) of RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & as directed by Engr-in-Charge. |
| 80 | S&F non mettalic PVC conduit 25mm dia with accessorries complete all as specified and as directed. |
| 81 | Cutting chases, pinning in, making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshade, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good to disturbed surfaces complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender