Tender For Periodical Services To External Surface And Common Area Of Bldg Certain Br Works At New Navy Nagar Under Age B/R-I (Nw) Navy Nagar Of Ge (Nw) Navy Nagar, Colaba, Mumbai
Tender Value
49 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
9 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To External Surface And Common Area Of Bldg Certain Br Works At New Navy Nagar Under Age B/R-I (Nw) Navy Nagar Of Ge (Nw) Navy Nagar, Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.and disposal of rubbish outside the MoD land at any distance complete all as specified and directed by Engr-In- Charge. |
| 2 | Providing and applying fair finish 15mm thick plaster with ready mix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces , on internal surfaces including transporting of material, mixing, curing, etc.complete all as specified and directed by Engr-In- Charge. |
| 3 | Providing and applying fair finish 20mm thick plaster with ready mix prepacked proportioned dry mix mortar mixed with PP fibre fair faces of brick wall or concrete surfaces , on external surfaces including transporting of material, mixing, curing, scaffoldings etc upto 9 th floor.complete all as specified and directed by Engr-In- Charge. |
| 4 | M&L Complete removal of existing treatment on wall surface complete all as specified and directed by Engr-In- Charge. |
| 5 | Providing & applying anti algal water-based elastomeric exterior wall finish on old/newly plastered surfaces including surface preparation, applying suitable wall prime seal primer coverage area as per manufacture instruction and application of two coats (base coat & top coat coverage area per manufacture instruction ) & of paint by roller etc. complete all as specified and directed by the Engineer-in-charge. |
| 6 | M& L for 1-2 mm thick wall care putty on wall surface all as specified and as directed upto 9 storey |
| 7 | M&L for preparing newly plastered surfaces or putty surface of wall and applying two coats of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and directed by Engr-In- Charge. |
| 8 | M&L for two coats of floor guard paint on surface of old paver block and concrete tiles including cleaning with brush and water to prepare of clean surfaces complete all as specified and directed by Engg-In- Charge. |
| 9 | M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge |
| 10 | M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge |
| 11 | M&L removal of tree/plant/shrubs of any size from walls, ceiling, roofs and joints of pipe etc of the bldg from ground floor to 10 th floor or upto roof level including uprooting roots from walls/ceiling/roofs and applying chemical of approved make to arrest the growth of tree/plant/shrubs and making good damage surface in PCC 1:2:4 type B-1 or cement mortar (1:3) complete all as specified.Note :- Rates should include steel pipe scaffolding upto G+5 story bldg. |
| 12 | Dismantling of Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc laid beded and pointed in any mortar including removing debris outside MoD area at any distance complete all as specified. |
| 13 | M&L 18-20mm th mirror polished Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like over 15m thick screed bed or bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 14 | M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed) |
| 15 | M&L machine cut pre-polished kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement plaster ) |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposal of debris out side the MoD land etc complete all as specified and directed. |
| 17 | M&L for Glazed coloured ceramic tiles in vertical surface 600X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat complete all as specified and directed by Engr-in-Charge. |
| 18 | Taking down CI/PVC (SWR)/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia all as specified and as directed. ( Inclusive of scaffolding of any hight ) |
| 19 | Supply and fixing PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall complete all as specified and directed by Engineer-In-charge. |
| 20 | S & F for Pipe Supporting Clamping - Single Pipe of dia 110 mm (4\\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\\") Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3\\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\\") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4\\") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 4 nos. All other detail as specified in Chief Engineer Navy Mumbai Technical Drawing (TD) of Pipe Supporting System No. TD/2023/01. complete all as specified and as directed (upto 9 Storey). |
| 21 | Supply and fixing 110mm PVC (SWR) bends with access door complete all as specified and as directed by Engineer-In-charge. |
| 22 | Supply and fixing PVC (SWR) branch piece, Single (single Y) equal or unequal for 110 mm bore access door eye. complete all as specified and directed by Engg-In- Charge. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 24 | S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc and similar work conforming Fe 290 (Gde E- 165) including working platform/scaffolding complete all as specified & directed by Engr-in-Charge |
| 25 | M&L preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 26 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 27 | M&L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern correspondings to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and directed. |
| 28 | Fabrication and erection fixing of Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc and similar work conforming Fe 290 (Gde E- 165) including working platform/scaffolding complete all as specified & directed by Engr-in-Charge |
| 29 | Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 30 | M&L for filleting in any position and to any shape of section area not exc 25 sq cm in cement sand mortar 1:4 including all mitres, stops etc complete all as specified and as directed. |
| 31 | Material & Labour for protective treatment of exposed chhajja including top surface, edges and wall junctions (width not exceding over 30 cm) over PCC filleting with polyurethane hybrid next generation liquid applied roof top coat with Flutyne Protection Technology, complete as specified below:(a) Apply one coat of primer on cleaned and dry chhajja surface at the rate as per manufacturer's instructions and allow to dry for 6 to 8 hrs.(b) Apply 1st coat of polyurethane hybrid next generation liquid applied roof top coat waterproof coating without dilution @ 700 ml/Sqm.(c) Lay 45 GSM fibre glass mesh over the 1st coat while wet and properly embed it as a sandwich layer. This shall not be considered as a second coat.(d) Apply 2nd coat of polyurethane hybrid next generation liquid applied roof top coat waterproof coating without dilution @ 700 ml/Sqm at 90° to the first coat.(e) Apply 3rd coat of polyurethane hybrid next generation liquid applied roof top coat waterproof coating without dilution @ 700 ml/Sqm at 90° to the 2nd coat, ensuring no pinholes or air bubbles.(f) Treat all chhajja edges, corners and wall junctions properly and allow the system to air cure for minimum 7 days. Minimum finished thickness shall be 1.2 mm to 1.6 mm after 7 days. |
| 32 | Supply and fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified and directed. |
| 33 | Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. Hard concrete should not be removed by force complete all as specified and directed |
| 34 | Mixing and applying premix SBR latex polymer modified cement mortar 30 mm thick as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed .(Note : Rate includes the rate of steel scaffoldings at G+4 Storey Bldg. No separate payment will be paid for scaffoldings). |
| 35 | M&L for Opening the Separation Cracks at the Junction of RCC and Masonry where ever directed and instructed into ‘’V’’ Grooves 2’’ to 3’’ from the either side of the cracks by carefully marking the areas to be opened up using a Cutting machine and skilfully /carefully Chiselling with a well sharpened chisel and hammer as directed including Wire brushing and washing of concrete Substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the Consultant as instructed and directed. |
| 36 | M&L for Moistening the Cracks, Providing and applying priming/bonding coat of slurry made out of “Polyalk EP”and cement (or equivalent as specified in the List of Brand names) in proportion 1:1 to surfaces prepared as instructed and directed. Filling the Cracks /Grooves by Providing and applying “Polyalk EP” Polymer modified cement mortar (or equivalent as specified in the List of Brand names) in Proportion of 1: 5: 15 (Polyalk EP: Cement: Graded sand/quartz sand) on the prepared surfaces and finishing it in level with the existing plaster Including Hand packing, curing and making the surface similar to the external plastering using wooden floats/punch etc. complete all as specified and directed by Engr-In- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender