Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58469248

Tender For Repairs To Sewage Line, Manholes, Culvert, Drain, Path, Fencing And Misc Works At installation Agrani Coimbatore

Issued by Statutory Bodies & Commissions/Committees · Coimbatore, Tamil Nadu
Tender Value
40 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs To Sewage Line, Manholes, Culvert, Drain, Path, Fencing And Misc Works At installation Agrani Coimbatore

BOQ

Name of Work:- REPAIRS TO SEWAGE LINE, MANHOLES, CULVERT, DRAIN, PATH, FENCING AND MISC WORKS AT INS AGRANI COIMBATORE
Sl. No. Item Description
1Cleaning the existing SGSW/CI /PVC (SWR) sewage Pipe line of any dia by mechanical means by rodding, jetting and removing all sludge and foreign matters completely and neatly form the pipe line under faul condition (including lines and manholes under blocked/choked condition) and making the sewage lines serviceable for free flow of sewage including blocking of higher level manholes, washing with fresh water to the cleaned line by means of hydraulic/pneumatic/vacuum water jet etc all as specified and directed by Engr. In-Charge. These operation shall be carried out strictly in conformity with the provisions of Manual scavenging (Prohibition) Act and by following all mandatory safety provisions.
2Cleaning of manholes of any size and depth up to 2.00 mtrs under faul condition, by removing MH covers, removing of accumulated liquid, sludge/sediments by mechanical means, transporting the fluid/sludge etc in covered containers by mechanical means and disposing of the same in CPCB approved central STP/ETP facility. Cleaning of the manholes with fresh water and white washing inside MH, including petty repairs of cement mortar/cement concrete(type B-1 1:2:4 using 20 mm graded aggregate and) patch work on holes if any made by rodents of making good to walls, placing the MH covers back in intact in position and setting in sment mortar 1:6 all as directed by Engr-in-charge.
3Cleaning and removing individual blockages in IWC/EWC by mechanically and removing all sludge and foreign matters completely, neatly and making serviceable for free flow all as specified and directed
4All as per item no. 3 above, but for Gully trap/ nahani trap/ floor trap etc including opening the gratings and replacing the covers/ gratings in position and making good complete all as specified.
5Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc. and getting out in hard/dense soil all as specified and directed
6Demolition and breaking up drain pipes (salt glazed drain pipes, AC or RCC) set in cement mortar internal dia of pipes 150/110 mm including under and hanching of any Cement concrete all as specified and directed .
7S& 160mm (outer dia) PVC (SWR) pipes single socketed, in any length, laid in trenches, in floors or fixed to walls complete all as specified and directed.
8S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in drains all as specified and directed.
9M&L PVC (SWR) gully traps 125x110 mm,setting and jointing with solvent cement all as specified and directed .
10S&F PVC (SWR) bends any radius,110mm bore all as specified and directed
11S&F PVC (SWR) bends any radius, 110mm bore with access door all as specified and directed
12S&F 110mm dia PVC (SWR) junction, single (singleT) equal or unequal with access door all as specified and directed
13M&L Concrete bed to 150mm bore drain pipes in PCC 1:4:8 type D-2 incl packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed
14M&L Concrete bed to 100mm bore drain pipes in PCC 1:4:8 type D-2 incl packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed
15Returning, filling in, including spreading, watering and well ramming in layers n.exc 25 cm thick using soils all as specified and directed .
16Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point as in soils all as specified and directed
17Demolition of brick work or stone/boulder/block masonry built in cement mortar, incl all quoins, arches, pillars, etc all as specified and directed
18Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed
19Demolition of cement concrete (unreinforced) in ground floors n.exc 15 cm thickness ( below or above ground level) all as specified and directed .
20M&L Pre-cast cement concrete block masonry type C1 1;3:6 using 20 mm graded stone aggregates with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified and directed
21M& L Rendering 15 mm thick in cm 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement all as specified and directed
22M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and directed .
23M&L for cement concrete type B1 type B1 1:2:4 using 20mm graded aggregate as in benchings/copings all as specified and directed
24M&L for precast cement concrete type B1 1:2:4 using 20mm graded aggregateset in CM 1:4 as in cover slabs all as specified and directed. Note:- Reinforcement will be measured and paid separately.
25M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels and drains all as specified and directed .
26M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and directed .
27M&L 75 mm thick PCC 1:3:6 type C2(using 40 mm graded agg) as in plinth protection/path laid and finished in bays not exc 3 m c/c and filling the joints with mastic bitumen complete all as specified and directed.
28M&L 100mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base all as specified and directed .
29M/L for chequerred cement concrete tiles with grey cement and pigment of size 200x200mm x 25mm thick set, jointed and pointed in neat cement slurry incl 15mm thick in CM 1:4 bedding layer of mortar all as specified and directed.
30M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including finishing the outer edge with cement concrete 1:2:4 using 20 mm graded aggregate as directed by Engineer in Charge
31M&L Sand filling under floors or in foundations including watering and consolidation all as specified and directed
32S&F Mild TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed
33Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed .
34S & F MS steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 all as specified and directed .
35S & F Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk) forming holes, without any attachment all as specified and directed.
36M&L for purpose made mild steel bolt 75mm long 12mm dia with hegonal or square head one end and screwed the sother or screwed both ends each screwed is to be fitted with washers and one hexagonal or square nut all as specified and directed.
37M&L Preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
38Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returnig filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete.
39Supply only PVC coated (1mm thick) chain link fencing exc 2.00 Kg per but n exc.3.5 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm complete all as specified and as directed.
40Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires including dismantling of old PVC coated chain link fenciing complete all as specified and directed.
41S & F stainless concertina coil grade 304 with over dia of 610mm having SS Core wire diameter 2.50mm,blade thickness 0.40 to 0.60mm, tensile strength 1350-1550 N/mm2 and strand of straight razor wire (material stainless steel grade 304) an fixed with the clips of heavy duty 'J' clips SS 304 Grade, with profile of Razor wire fish hook, blade length 66 mm, core wire dia meter 2.50mm with number of loop per coil 56, including dismantling of old concertina coil complete all as specified and directed by the Engineer-in-Charge
42M/L for preparation of old surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds,moss and efflorescent salts and trading oil and greasy spots of walls and appliying one coat of cement base paint, including scaffolding for height upto G+6 building complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469248
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 40 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs To Sewage Line, Manholes, Culvert, Drain, Path, Fencing And Misc Works At installation Agrani Coimbatore
Basic Detail
Tender No CWE(NW)KOCHI/81707
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 09 Nov 2026
Submission Date 30 Nov 2026
Open Date 07 Dec 2026
Finance
Tender Value 40 Lakhs
Tender Fee 500
EMD 80000
Exemption Available
Document List
120af6cf-764f-4612-8022-bcb5f20fb108.html
BOQ_895208.xls
TENDERDOCUS.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

120af6cf-764f-4612-8022-bcb5f20fb108.html

xls

BOQ_895208.xls

pdf

TENDERDOCUS.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender