Tender For Provision Of Hard Standing And Covered Shed At Both Side (Front & Back) Repairing To Security Wall With Security Fencing At Ris Bldg And Addn/Alt To Storm Water Drain In From Of Aa And Ah Building Including Widening Of Area Drain At Old/Ne
Tender Value
46.90 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
17 days left
EMD
93800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Hard Standing And Covered Shed At Both Side (Front & Back) Repairing To Security Wall With Security Fencing At Ris Bldg And Addn/Alt To Storm Water Drain In From Of Aa And Ah Building Including Widening Of Area Drain At Old/New Navy Nagar Under Ge (Nw) Navy Nagar, Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 2 | M&L Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping/kerbs or fixing of angle in brickwall as coping including necessary form work including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge. |
| 3 | Demolition of Concrete of any description and in any position not otherwise and removing debrish from outside defence land complete all as specified and directed. |
| 4 | M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling, walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 5 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 6 | S&F Rolled mild steel in rolled sections as in main and cross beams,hip and jack rafters,purlins fixed with angle cleats or other connecting plates with Fe-290 (Gde E165) complete all as specified. |
| 7 | M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified. |
| 8 | S&F Mild steel sheet eaves gutters, thickness 1.25 mm and dia 100 mm mild steel galvanised class 3, half round with rounded edges complete all as specified and directed. |
| 9 | S&F Drop ends (for spigot or socket ends) for mild steel sheet eaves gutters (thickness 1.25 mm and dia 100 mm) complete all as specified and directed. |
| 10 | S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed by Engr-in-charge. |
| 11 | S&F PVC (SWR) pipes dia. 110 mm single socketed in any length with rubber ring joints fixed to walls with U clamp at 1.5 m c/c complete all as specified and directed by Engr-in-charge. |
| 12 | Cutting holes into or through in brick walls for angles ( superficial area not exc. 150 sq. cm) built in cement mortar or cement line mortar and stone walls built in lime mortar or walls of lime concrete. |
| 13 | Supply and fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified and directed by Engg-In- Charge. |
| 14 | Filleting in any positionand to any shape area not exc. 25 sq cm in cement mortar 1:4 including all mitres, stops, etc. |
| 15 | Rough excavation in soft/loose soil not exceeding 1.5 m deep and getting out |
| 16 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. and removing debrish from outside defence land complete all as specified and directed. |
| 17 | M&L for plain Cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate in surface channels and drains for haunching at wall base junction of open drain. |
| 18 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 19 | M&L for 75 mm plain cement concrete 1:4:8 type D-2 ( 40 mm graded aggreate) as in sub floors, sub bases, floors and pavings etc all as specified and directed |
| 20 | M&L for sand filling ( 50 mm) under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F Machine Pressed precast concrete interlocking paver block of 60 mm thick M-35 Grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed. |
| 22 | Removing excavting soil/material beyond 5 km upto total distance of 15 km and depositing where directed |
| 23 | Excavating soft/ loose soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out |
| 24 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 mtr mean redious built in CM 1:6 all as specified |
| 25 | Providing and applying fair finish 15mm thick plaster with ready mix prepacked proportioned dry mix mortar with CM ratio 1:4 for fair faces of brick wall or concrete surfaces ,wall surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 26 | Dismantling Cast iron work any description |
| 27 | S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles (Articles exc 5 kg each) |
| 28 | Taking down cement plaster of any description etc. including raking out joints, hacking for key, scrubbing down with water, etc. Including removal of debris out side MD land complete all as specified and directed by Engr-in-charge. |
| 29 | M & L for preparing old plastered surfaces after complete removal of existing painting and applying two coats of acrylic based exterior emulsion paint over a coat of suitable primer as per manufacturer on walls complete all as specified and directed by Engr-in-charge. |
| 30 | M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior emulsion paint over a coat of suitable primer as per manufacturer on walls complete all as specified and directed by Engr-in-charge. |
| 31 | Material & Labour for prepration of old paint surface and apply one coat of synthetic enamel paint on steel surfaces of any description complete all as specified and directed by Engineer-In-charge. |
| 32 | Dismantling wrought iron or mild steel work of any description not otherwise provided for as complete all as specified. |
| 33 | S&F in repair barbed razor type concertina coil 9 SWG hot galvanised spring tensile wire of UTS 145 to 150 Newton per square mm zinc coating 250-300 grams per sqm ,dia of coil when unstretched 600 mm covering 8 to 10 running meter per coil and minimum weight of coil (GI strip) 1.625 kg per running metre hot dip galvanised razor ribbon tape of size 0.50 mm thickness, 19 mm wide before wrapping on central core wire fixed 1.66 mm thick GI clip minimum 25 nos per running metre and special nut bolt to hold two coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed . |
| 34 | S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc as directed by EIC (each line wire to be measured). |
| 35 | M&L Plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in coping/kerbs or fixing of angle in brickwall as coping including necessary form work including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge. |
| 36 | M&L for plain Cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in surface channels and drains for haunching at wall base junction of open drain. |
| 37 | M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces even and smooth with using extra cement complete all as specified & directed. |
| 38 | M&L for mild steel plates, plain or chequered 5 mm th or over as in drain/manhole cover conformimg to Fe 290 (Gde E-165) channels , squar cut or notched forming holes, without any attachment complete all as specified and directed. |
| 39 | M&L one coat of synthetic emamel paint on old steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed. |
| 40 | Fabrication and fixing only for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified & directed. |
| 41 | M&L reinforced concrete pipes 150mm, class NP2, laid and jointed complete with collars. |
| 42 | M&L reinforced concrete pipes 300mm, class NP2, laid and jointed complete with collars. |
| 43 | M & L 150 mm bore Cement concrete bed in foundation PCC bed for NP2 pipe and PCC Type C2 1:3:6 (40 mm graded aggregate) including under and haunching against the sides of pipes they ara laid and tested complete all as specified & directed. |
| 44 | M & L 300 mm bore Cement concrete bed in foundation PCC bed for NP2 pipe and PCC Type C2 1:3:6 (40 mm graded aggregate) including under and haunching against the sides of pipes they ara laid and tested complete all as specified & directed. |
| 45 | M & L for dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 46 | M&L for 100 mm plain cement concrete 1:3:6 type C-2 ( 40 mm graded aggreate) as in sub floors, sub bases, floors and pavings etc all as specified and directed |
| 47 | M & L chequered cement concrte tiles 30cmx30cmx25 mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 for laying floor tiles complete all as specified and as directed . |
| 48 | S&F Machine Pressed precast concrete interlocking paver block of 80 mm thick M-40 Grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender