Defence Statutory Bodies & Commissions/Committees Closing in 8 days TDR #58469226

Tender For Certain Br Repairs To Fencing Plain Cement Concrete Hard Standing, Boundary Wall, Drain Grating Etc At New Navy Nagar Under Age B/R I Colaba, Mumbai Of Ge (Nw) Navy Nagar, Colaba, Mumbai

Issued by Statutory Bodies & Commissions/Committees · Mumbai, Maharashtra
Tender Value
49 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Certain Br Repairs To Fencing Plain Cement Concrete Hard Standing, Boundary Wall, Drain Grating Etc At New Navy Nagar Under Age B/R I Colaba, Mumbai Of Ge (Nw) Navy Nagar, Colaba, Mumbai

BOQ

Name of Work:- CERTAIN BR REPAIRS TO FENCING PCC HARD STANDING, BOUNDARY WALL, DRAIN GRATING ETC AT NEW NAVY NAGAR UNDER AGE B/R I COLABA, MUMBAI OF GE (NW) NAVY NAGAR, COLABA, MUMBAI
Sl. No. Item Description
1Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and disposal of rubbish outside MoD land at any distance.
2Providing and applying fair finish 15mm thick plaster with ready mix prepacked proportioned dry mix mortar on brick wall or concrete surfaces, including transporting of material, mixing, curing, etc.complete all as specified and directed by Engr-In- Charge.
3M&L for preparation of new wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified
4M&L for Complete removal of existing treatment over wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified
5Preparation of old decorated surfaces of walls by any means scrapping old surface washing the surface with Bleaching powder throughly, & applying one coat of weather proof acrylic based paint (100%) exterior grade including scaffolding etc all as specified and directed by Engr-in-Charge.
6M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge
7M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge
8M&L cleaning the existing surfaces of chequered tiles/paver blocks and applying one coats of floor guard paint (1st quality as approved by GE) complete all as specified and directed by Engr-in-charge
9Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
10M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6
11Dismantling wrought iron or mild steel work of any description not otherwise provided for
12Material & Labour for providing and fixing stainless steel (Grade 304) railing/ grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
13M&L for framed work as in doors or gates of angle or other section with gusset plates, with Fe-290 (Gde E165) quality A complete all as specified., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified.
14S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
15M&L Plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) fixed to angle iron frame complete all as specified.
16S&F Rolled mild steel in rolled sections as in main and cross beams,hip and jack rafters,purlins fixed with angle cleats or other connecting plates with Fe-290 (Gde E165) quality A complete all as specified.
17S&F in repair barbed razor type concertina coil 9 SWG hot galvanised spring tensile wire of UTS 145 to 150 Newton per square mm zinc coating 250-300 grams per sqm dia of coil when unstretched 460 mm covering 8 to 10 running meter per coil and minimum weight of coil (GI strip) 1.625 kg per running metre hot dip galvanised razor ribbon tape of size 0.50 mm thickness, 19 mm wide before wrapping on central core wire fixed 1.66 mm thick GI clip minimum 25 nos per running metre and special nut bolt to hold two coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed .
18S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc as directed by EIC (each line wire to be measured).
19M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified.
20Excavation in soft/loose soil for post holes or similar holes each n. exc. 0.5Cum getting out returning filling and ramming earth or broken rabble mixed with earth around in layer n. exc. 25cm all as specified and directed.
21M&L for Removing excavated material exc. 1.50 km but n exc. 5 km and depositing outside the MoD land
22M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling mass concretre etc complete all as specified and directed.
23Dismantling fencing wire mesh, any type
24Supply only for Chain link MS galvanisd fencing,( such as 50mm x 50mm mesh with 4.0 mm GI wire) ( minimum weight of chain link fencing should not be less than 2.00 kg per Sqm)
25Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire
26S&F Mild steel bolts purpose made with hexagonal or square head (n.exc 12mm dia) one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut nexc 30cm long
27Cleaning existing strom drain /open drainage / culverts / manholes of up to 1.50m depth including removing cover slabs , soils , spoils , vegetation , silt etc and refixing cover slabs including making good in cement mortar 1: 6 and removing material outside the MD land exc. 5 Km but n. exc 10 Km complete all as specified and directed by Engr-in-charge.
28Dismantling of Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc laid beded and pointed in any mortar including removing debris outside MoD area at any distance complete all as specified.
29M&L 18-20mm th Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
30Providing edge moulding to 18 -20mm thick Granite work, marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
31Dismantling roof sheets / wall cladding etc complete all as spcified and as directed.
32S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
33S&F Pre- painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
34Supply & fixing in repair 3mm thick Aluminium composite panel cladding plain of approved colour/shade to facia of slab/beam/column/slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purline/rafter/column beam/slab to hold ACP cladding etc including takingdown old unserviceble aluminium composite panel. (Note : Colour / Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-In-Charge
35Demolition of plain cement/Asphaltic concrete in ground floors n. exc. 15 cm in thickness (below or above GL)unreinforced and removing debries out side of MoD land.
36M&L for Chequered cement concrete coloured tiles with gray cement and pigment and glossy finished 22-25mm (rubber form moulded) any size in floors etc, set, jointed & pointed with cement slurry complete all as specified.
37M & L for screed bedding 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1: 6 even and fair complete all as specified .
38M&L 75mm thick PCC 1:3:6 Type C1 (20mm graded aggregate) as in floor/ path/ Plinth protection including necessary form work, surfaces finished even and smooth without using extra cement. all as specified and directed.
39M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes all as specified.
40M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge.
41S&F Machine Pressed precast concrete interlocking paver block of 60 mm thick M-35 Grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed.
42S&F Machine Pressed precast concrete interlocking paver block of 80 mm thick M-40 Grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed.
43Taking out shrubs/vegetation growth from building at any height and at any location with roof and applying a glyphosat pesticide or any other equivalent persticide in a ratio of 1:50 with water on roots including taking down cement plaster not etc 0.50 sqm for each tree and making good surface by plastering the same area with 20mm thick plastering in cement mortar 1:4 and finishing the surface to mathch existing surface with necessary scaffolding and other required T&P complete all as specified and directed by Engr-in-Charge.
44M&L for dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
45M&L for stone face/ glazed ceramic coloured tiles 300 x 600 x 7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement, including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed by Enginner-in-Charge.
46Providing precast cement Type B1 1:2:4 (20 mm graded aggregate) in landings,cover slabs for man holes,chambers etc and similar articles set in cement mortar 1:6 complete all as specified and directed
47M&L for Cement concrete type C2 1:3:6 (40mm graded aggregate) as in surface channels and drains complete all as specified and directed by Engr-in-charge.
48M&L Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping/kerbs including necessary form work including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge.
49Dismantling cast iron work of any description
50S&F Cast iron work grade FG 150, unmachined in gratings ,frames,manhole covers ,gully traps etc of articles exc 5 kg each complete all as specified and directed.Note: Works shall be carried out upto G+05 storey bldg. Rate incl removal of all debries outside of MD land and necessary scaffolding & Safety Net Cloth at places. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469226
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Certain Br Repairs To Fencing Plain Cement Concrete Hard Standing, Boundary Wall, Drain Grating Etc At New Navy Nagar Under Age B/R I Colaba, Mumbai Of Ge (Nw) Navy Nagar, Colaba, Mumbai
Basic Detail
Tender No 8724/E8
Bidding Type Tender
Location
City Mumbai
State Maharashtra
Key Dates
Publish Date 09 Nov 2026
Submission Date 30 Nov 2026
Open Date 02 Dec 2026
Finance
Tender Value 49 Lakhs
Tender Fee 500
EMD 98000
Exemption Not Available
Document List
BOQ_895157.xls
dc3e0420-be03-44e8-8e2c-37d898c76850.html
TENDERDOCUMENT.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895157.xls

html

dc3e0420-be03-44e8-8e2c-37d898c76850.html

pdf

TENDERDOCUMENT.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender