Tender For Repair & Polishing Of Wooden / Steel / Map Furniture And Recanning Of Different Type Of Chairs And All Type Of Charpoy Gi / Map Af Stn Basant Nagar Under Ge (Af) Palam Delhi Cantt - 10
Tender Value
6.96 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
9 days left
EMD
14000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Polishing Of Wooden / Steel / Map Furniture And Recanning Of Different Type Of Chairs And All Type Of Charpoy Gi / Map Af Stn Basant Nagar Under Ge (Af) Palam Delhi Cantt - 10
BOQ
| Sl. No. | Item Description |
| 1 | ALMIRAH STEEL MEDIUM / SMALL (a) Shelf : M&L Shelf made out of 1.0mm thick Mild Steel Sheet of Almirah Steel Med/Small and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed by Engr-in-charge. |
| 2 | (b) Door : M&L Door made out of 1.0mm thick Mild Steel Sheet of Almirah Steel Med/Small and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed by Engr-in-charge. |
| 3 | (c) Legs : M&L Leg made out of 1.0mm thick Mild Steel Sheet of Almirah Steel Med/Small and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed by Engr-in-charge. |
| 4 | (d) Locking Device : M&L Locking Device made out of 1.0mm thick Mild Steel Sheet of Almirah Steel Med/Small and made to shape and size as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Locking Device, complete all as specified and as directed by Engr-in-charge. |
| 5 | (e) Lock : M&L Lock (MAKE : GODREJ/Harrison/Link with 7 Levers) of Almirah Steel Med/Small and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Lock, complete all as specified and as directed by Engr-in-charge. |
| 6 | (f) Handle : M&L Mild Steel HANDLE (as approved) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Handle, complete all as specified and as directedby Engr-in-charge. |
| 7 | (g) Hinge : M&L Mild Steel Hinge (as approved) 75mm in size suitable forAlmirah Steel Med/Small and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Hinge, complete all as specified and as directed by Engr-in-charge. |
| 8 | (h) Paint : M&L preperation of old surfaces of Almirah Steel Med/Small (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying Two Coat of OG Synthetic Enamelled Paint (as approved) over a coat of red oxide by Spray Painting Machine on external and internal surface of almirah including shelfs, complete all as specified and as directed by Engr-in-charge. |
| 9 | CHAIR VERANDAH (a) Welding : M&L welding (full round of pipe as a one spot) of broken part of Chair Varandah as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer , complete all as specified and as directed by Engr-in-charge. |
| 10 | (b) Legs : M&L removing of old leg / frame part of CHAIR VERANDAH and S&F new part/Leg portion made of 20 mm dia MS pipe of 1.6 mm wall thickness as per Drawing No. FD-19, FD-256 & FD-259 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 11 | (c) Round Bar : M&L Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side or Rear Side of Chair Varandah as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Bar, complete all as specified and as directed by Engr-in-charge. |
| 12 | (d) Shoes : S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of Chair Varandah as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed by Engr-in-charge. |
| 13 | (e) Re-Canning : M&L Re-canning of Chair Varandah in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out Canning, complete all as specified and as directed by Engr-in-charge. |
| 14 | (f) Painting : M&L removing/scrapping old worn out Paint from Steel Frame of Chair Varandah(Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying Two Coat of White Colour Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed by Engr-in-charge. |
| 15 | (g) PVC Seat : M&L removing of old PVC seat and back of Chair Varandah and S&F new PVC seat and back as per Drawing No. FD/MAP-II/06 complete all as specified and as directed by Engr-in-charge. |
| 16 | LOCKER BED SIDE STEEL (a) Shelf : M&L Sheld made out of 1.0mm thick Mild Steel Sheet of Locker Bed Side Steel and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed by Engr-in-charge. |
| 17 | (b) Door : M&L Door made out of 1.0mm thick Mild Steel Sheet of Locker Bed Side Steel and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed. |
| 18 | (c) Leg : M&L Leg made out of 1.0mm thick Mild Steel Sheet of Locker Bed Side Steel and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed. |
| 19 | (d) Haps & Stapple : M&L aluminum Haps & Stapple of size 100mm forLocker Bed Side Steel and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed by Engr-in-charge. |
| 20 | (e) Handle : M&L Mild Steel Handle (as approved) of Locker Bed Side Steel and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed by Engr-in-charge. |
| 21 | (f) Hinges : M&L Mild Steel Hinge (as approved) 50mm in size suitable for Locker Bed Side Steel and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed by Engr-in-charge. |
| 22 | (g) Painting : M&L Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide by Spray Painting Machine on external and internal surface of locker including shelfs, complete all as specified and as directed. |
| 23 | CHAIR WRITING (a) Seat : M&L Seat of Chair Writing and S&F of complete Seat including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed by Engr-in-charge. |
| 24 | (b) Back : M&L Back of Chair Writing and S&F of complete Back including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed by Engr-in-charge. |
| 25 | (c) Handle : M&L Handle of Chair Writing including taking out unserviceable Handle from Chairs, complete all as specified and as directed by Engr-in-charge. |
| 26 | (d) Runner : M&L Mild Steel Flat Iron 25x3.0mm as Runner of length 500mm (approx), fixing one End and Other End welded to Chair Writing, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD/MAP/12 including taking out unserviceable Runner, complete all as specified and as directed by Engr-in-charge. |
| 27 | CHARPOY GI PIPE PLY TOP (a) Long Rail :M&L Complete Removing of unservicable long rail from Charpoy GI and Fixing new long rail of GI tubing 32 MM medium grade (ISI marked) duly threaded both ends all as per drg and as directed by Engr-in-Charge. |
| 28 | (b) Short Rail : M&L Complete Removing of old unserviceable short rail from Charpoy GI and making of 2 Nos short rails from long rails obtained from item No. 1 (a) and threading the both ends of short rails and fixing in position complete. All as specified and as directed by Engr-in-Charge. |
| 29 | (c) Legs : M&L Complete Removing of old unserviceable legs from Charpoy GI and making of 2 Nos legs from short rails obtained from item No. 1 (b) and threading the both ends of legs and fixing in position complete. All as specified and as directed by Engr-in-Charge. |
| 30 | (d) GI Elbow 3 Way 32 MM :M&L Complete Removing of unserviceable 3 way elbow from Charpoy GI and S & F new GI elbow 32 mm dia ISI Marked as per drawing. |
| 31 | (e) GI Check Nut 32 MM :M&L Complete Removing of unserviceable check nuts from Charpoy GI and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing. |
| 32 | (f) Ply Top : Removing of unserviceable ply Top from Charpoy GI Pipe tightening of loose components of (i.e.complete charpoy ).S&F Plywood 12MM Thick BWR Grade ISI marked confirming to IS-303 (MAKE : GREEN PLY/CENTURY/ ARCHIED), of required size (out of 7’x3’) with galvanized iron nuts and bolts of required size and suitable length . All as specified and as directed by Engr-in-Charge. |
| 33 | (g) Stiffeners : S&F 3 stiffener made out of flat iron 900x50x5mm duly painted with two coat of Black colour synthetic enamel paint of 1st quality over a coat of red oxide primer to be fixed over the long rails of drilling holes in flat iron and long rail by 01 No semi circular top bolts of 6mm diax75 mm long for every stiffener and every side, total 02 Nos for every stiffener. All as specified and as directed by Engr-in-Charge. |
| 34 | BED HARD STEEL (a) Head Side Board : M&L Head Side Board of Bed Hard MS Tubing of MDF Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Head Side Board, complete all as specified and as directed by Engr-in-Charge. |
| 35 | (b) Foot Rest Board : M&L Foot Rest Board of Bed Hard MS Tubing of MDF Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Foot Rest Board, complete all as specified and as directed by Engr-in-Charge. |
| 36 | (c) Ply Top : M&L Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), and fixing to BED HARD MS TUBING as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Plywood Top, complete all as specified and as directed by Engr-in-Charge. |
| 37 | (d) Stiffener : M&L Middle Stiffener made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to Bed Hard MS Tubing and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge. |
| 38 | (e) Clit : M&L Mild Steel Clit of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to Bed Hard MS Tubing and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge. |
| 39 | (f) Painting : M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of Bed Hard MS Tubing (Drawing No. FD/E6/MAP/08R by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed by Engr-in-Charge. |
| 40 | CHARPOY MS TUBING WITH PLY TOP (a) Ply Top : M&L Plywood Top 12mm thick BWR grade confirming to IS-303, ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), and fixing to Charpoy MS Tubing with Plywood Top as shown on Drawing No. FD/MAP-II/01 including taking out unserviceable Plywood Top, complete all as specified and as directed by Engr-in-Charge. |
| 41 | (b) Middle Stiffner : M&L MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed. by Engr-in-Charge. |
| 42 | (c) Clit : M&L Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge. |
| 43 | (d) Painting : M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of CCharpoy MS Tubing with Plywood Top (Drawing No. FD/MAP-II/01 by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed by Engr-in-Charge. |
| 44 | TABLE BED SIDE MAP (a) Top : M&L Top of Table Bed Side of postforming MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed by Engr-in-Charge. |
| 45 | (b) Side/Back : M&L Side / Back of Top of Table Bed Side of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable side/back, complete all as specified and as directed by Engr-in-Charge. |
| 46 | (c) Upper Drawer : M&L Upper Drawer of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable Upper drawer, complete all as specified and as directed by Engr-in-Charge. |
| 47 | (d) Lower Drawer : M&L Lower Drawer : of Top of Table Bed Side of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable lower drawer, complete all as specified and as directed by Engr-in-Charge. |
| 48 | (e) Legs : M&L Leg of Top of Table Bed Side of MS squre pipe 25x25 mm x 1.6 mm as shown on Drawing including taking out unserviceable leg, complete all as specified and as directed by Engr-in-Charge. |
| 49 | CHAIR DINING (a) Rear Legs: Taking down old u/s Rear Legs and S&F for new Rear Legs made out of second Class teak wood duly polished to match the existing Chair and all as specified in drg and as directed by Engr-in-Charge. |
| 50 | (b) Front Legs: Taking down old u/s Front Legs and S&F for new Front Legs made out of second Class teak wood duly polished to match the existing Chair and all as specified in drg and as directed by Engr-in-Charge. |
| 51 | (c) Side Rails: Taking down old u/s Side Rails and S&F for new Side Rails made out of second Class teak wood duly polished to match the existing Chair and all as specified in drg and as directed by Engr-in-Charge. |
| 52 | (d) Front or Back Rails: Taking down old u/s Front or Back Rails and S&F for new Front or Back Rails made out of second Class teak wood duly polished to match the existing Chair and all as specified in drg and as directed by Engr-in-Charge. |
| 53 | (e) Bottom Stiffeners: Taking down old u/s Bottom Stiffners and M&L for new Bottom Stiffeners made out of second Class teak wood duly polished to match the existing Chair and all as specified in drg and as directed by Engr-in-Charge. |
| 54 | (f) Back Strip: Taking down old u/s Back Strip and S&F for new Back Strip made out of second Class teak wood duly polished to match the existing Chair and all as specified in drg and as directed by Engr-in-Charge. |
| 55 | (g) Bracket: S&F new bracket Traingular shape made out of second class hard teak wood of size 75 MM x 75 MM x25 MM duly polished to match the Chair with 02 Nos steel screw all as shown on drg and directed by Engr-in-Charge |
| 56 | (h) Shoes Rubber/PVC: Removing old/Worn out rubber/PVC shoes and M&L of new PVC/Rubber shoes of superior quality with steel plated screw of suitable size complete all as directed by Engr-in-Charge |
| 57 | (j) Re-Canning: Re-canning of Chair Dining in Godrej Pattern with oval shape 2 MM wide new white plastic cane and 3 MM wide at the edge make as approved by GE including taking out old cannning complete. Rest all as shown on drg and as directed by Engr-in-Charge. |
| 58 | TABLE DRESSING GENTS (a) Mirror : Removing of old/worn out UNSV mirror and S&F for fixing new mirror 5 MM thick Mirror (Make: Modi Guard/Atul/Saint Gobian as per size shown on drg and directed by Engr-in-Charge. |
| 59 | (b) Back Ply of Mirror : Removing unsv back from the Mirror and S&F new back made out of 6 MM thick Ply Wood BWR grade. Rest all as specified in drg and as directed by Engr-in-Charge. |
| 60 | (c) Top : Removing unsv Top from the Mirror and S&F new Top made out of 18 MM thick prelaminated MDF Board Exterior Grade. Rest all as specified in drg and as directed by Engr-in-Charge. |
| 61 | (d) Bottom : Removing unsv bottom and S&F new Bottom made out of 18 MM thick Pre laminated Particle Board exterior grade. Rest all as specified in drg and as directed by Engr-in-Charge. |
| 62 | (e) Drawer : Removing unsv Drawer from the table and S&F new Drawer made out of 18 MM thick prelaminated MDF Board Exterior Grade. Rest all as specified in drg and as directed by Engr-in-Charge. |
| 63 | (f) Knob/Handle : Removing unsv Knob/Handle from the table and S&F of new CP Knob/Handle 40 MM to suit the drawer. Rest all as specified in drg and as directed by Engr-in-Charge. M&L Junction box outdoor in replacement type, 3 phase 415 Volts of size 350x250x150 mm made out of hot press moulded SMC front openable hinged type including 4 Nos. Al bus bars mounted on insulators heavy duty of rating 32 Amps with necessary fixing arrangements to pole with MS calmps, nuts, bolts etc of size 25 x 4 mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Make : Sintex/Hensel/L&T Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender