Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58469209

Tender For Repair/Maint And Rewiring To Internal Electrification With Complete Fitting And Fixture And Connected Allied Works In Otm Accn Of Zone A And B Under Ge(West)Pathankot

Issued by Statutory Bodies & Commissions/Committees · Pathankot, Punjab
Tender Value
35 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair/Maint And Rewiring To Internal Electrification With Complete Fitting And Fixture And Connected Allied Works In Otm Accn Of Zone A And B Under Ge(West)Pathankot

BOQ

Name of Work:- REPAIR/MAINT AND REWIRING TO INTERNAL ELECTRIFICATION WITH COMPLETE FITTING AND FIXTURE AND CONNECTED ALLIED WORKS IN OTM ACCN OF ZONE A AND B UNDER GE(WEST)PATHANKOT
Sl. No. Item Description
1Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface/concealed wiring, wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as spd and directed.
2M&L for point wiring for light / fan controlled by one switch with 1.50 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable in stove enamelled steel conduit terminated in new pre galvanised iron sunken box with having protective zince coating and having thickness not less than 18 guage of adequate size with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed boxes, including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified .Note: colour coding is to be maintained .
3All as per Srl item No 2 here-in-before but for 5 pin 5 amps socket outlet or independent board complete all as specified and directed.
4All as per Srl item No 2 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
5M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable with in and including stove enamelled steel conduit with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained
6M&L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit ISI maked heavy duty for one light fan/bell point controlled by one switch including suitable MODULAR cover plate and MODULAR metallic boxes of suitable way matching with surrounding including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS cable as continous earthwire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green) (c) Metallic flush box should of same make of modular switch socket.
7All as per Srl No 6 here-in-before but for Modular call Bell point complete all as specified and directed by Engineer In Charge
8All as per srl item No 6 here-in-before but MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
9All as per srl item No 6 here-in-before but MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed.
10All as per srl item No 6 here-in-before but MODULAR 15/16 Amps socket outlet on independent board with 2.5 sqmm copper conducter FRLS cale and 2.5 sqmm PVC insulated unsheathed coper onductor cable FRLS (Green Colour) as earth lead complete all as specified and directed.
11All as per srl item No-6 here-in-above but using 4.00 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 4 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead for geyser point complete all as spd and directed.
12M&L for point wiring for light / fan controlled by one switch with 1.50 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodise pressed steel sunken box with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed boxes, including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green).
13All as per Srl No 12 here-in-before but for call Bell point complete all as specified and directed .
14All as per Srl item No 12 here-in-before but for 5 pin 5 amps socket outlet or independent board complete all as specified and directed.
15All as per Srl item No 12 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
16M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodised pressed steel sunken box with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified. Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green).
17S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed.
18S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.
19S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.
20S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
21S&F of Modular Fan step regulator 120W-2 module , complete all as specified and directed.
22S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.
23S&F switch piano flush button single pole one way 5 Amp AC 240 volts, all as specified and as directed.
24S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.
25S&F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
26S&F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.
27S&F switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge.
28Supply and fixing ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.
29S&F of Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.
30M&L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals all as specified and as directed.
31S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.
32S&F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 6 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
33S&F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
34S&F MCB SP 240V, 50Hz, 10 KA, 'B' curve of rating 6 to 40 Amp all as specified and directed.
35S&F MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 40 Amp all as specified and directed.
36S&F MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 63 Amp all as specified and directed.
37S&F MCB TPN 440V, 50Hz, 10 KA, 'B' curve of rating 63 Amp all as specified and directed.
38M&L for sub Main Wiring with 2 run of single core, 2.5 Sqmm FRLS PVC insulated and unsheathed, multi stranded copper conductor cable using colour code for phase red and neutral black with and including 2.5 Sqmm FRLS-H PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including steel conduit of suitable size (ISI marked) with and including all accessories complete and fixing the conduit with proper steel clamp with existing steel pipe/angle iron making good to disturbed surface of wall/floor with paint/primer and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed. Note: Two run of submain wire (phase and neutral), and one run of earth including steel conduit and accessories will be measured as one run.
39S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS-H flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS-H flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.
40All as per srl item No 36 here-in-before but submain wiring with 2 single core 4 sqmm and one 4 sqmm as eathing lead complete all as above but 4.00 Sqmm
41S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS-H flexible copper conductor cable of size 2x10 sqmm and one PVC insulated multistrand unsheathed FRLS-H flexible copper conductor cable of size 10 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including steel conduit 25mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.
42S&F in replacement sub Main Wiring with PVC insulated unsheathed multistrand FRLS-H flexible copper conductor cable of size 4x10 sqmm and one PVC insulated multistrand unsheathed FRLS-H flexible copper conductor cable of size 10 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including steel conduit 32mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.
43S&F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 63 AMPS AC 415 VOLTS 16 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing. ( (i) MCCB, MCB and DB should be of same make. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.
44S&F in replacement of LED Lamp, B22 type ,12 watt,complete all as specified and directed.
45S&F in replacement LED Bulkhead fitting 10 watt all as specified and directed by Engr-in-charge.
46Supply and fixing in replacement LED decorative wall light fixture made up of polycarbonate, suitable for retrofit LED lamp alongwith 12W LED lamp complete all as specified and directed.
47S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection one twin core flat cable or circular 10 Sqmm including PVC conduit of suitable size complete all as specified and directed by Engr-in-charge.
48S&F LED warm White 7W, 3000K brass LED picture light metal body having brass colour of 300mm size wall mounted type internally prewired and including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.
49S&F LED warm White 12W, 3000K brass LED picture light metal body having brass colour of 450mm size wall mounted type internally prewired and including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.
50S&F Decorative poles metallaic body (asthetically designed) of 03mtr height having two LED lights of 40W (warm white) on opposite sides each other, having base plate of size 340 x 380mm, aluminium casting complete including, 04 x nut bolt grouted of 20mm x 250mm size, 01xPVC bend of 32mm dia has to be grouted in PCC for cable in/out complete with all accessories internally prewired and including connecting up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.
51S&F LED luminaire 600 mm X 600 mm , 35/36 watt 220 V AC (Cool white/Warm white) surface/ recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holder & driver & LED lamp suitable for roof ceiling including connecting up with driver flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.
52S&F in replacement of 15W LED Post top light with aluminium enclosure, IP 65 energy saving, environment friendly, long life asthetically designed with symmetrical light distribution having clear cover for bright illumination with high power leds including connection with copper wire complete all as specified and directed.
53S&F 22W surface / wall mounted LED fitting, extruded aluminium housing with PC diffuser and inbuilt ind electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.
54S&F bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length on less than 0.9 mtr fixing with clamp etc and making connections using flexible copper cable of suitable size from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.
55S&F energy saving 150W highbay LED light with PDC aluminium housing with PC lens cover & mounting eye bolt with IP65 proetection, ceiling(surface/suspended) mounting with system efficacy upto 120Lm/W complete all as spd and directed.
56S&F LED flood light fitting 70 W light fitting ,Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural features on existing high mast poles/wall/any position or place on existing/New place and making connections with provision of PVC insulated copper conductor (multistranded) cable of 1.5 Sq mm size, complete all as specified and directed by Engr-in-Charge.
57Supplying, laying, jointing, commissioning and testing in replacement XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 120 sq mm 3.5 core confirming to IS-7098 (Part-I-1988) laid in trenches, along poles through pipes etc complete all as specified and directed by Engineer-in-charge.
58All as per item No 50 here-in-before but cable of cross sectional area 35 sq mm 3.5 core.
59All as per item No 50 here-in-before but cable of cross sectional area 25 sq mm 3.5 core.
60All as per item No 50 here-in-before but cable of cross sectional area 16 sq mm 4 core.
61All as per item No 50 here-in-before but cable of cross sectional area 16 sq mm 2 core.
62Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed.
63M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified
64M&L for old size Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid as directed.
65Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified.
66Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.
67M&L for GI tubing light grade 80 mm bore for cable protection laid in trenches in road crossing or fixed to wall / pole (Rates incl accessories such as bend, clamps, nuts bolts and washers req for fitting)
68M&L for GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall / pole (Rates incl accessories such as bend, clamps, nuts bolts and washers req for fitting)
69Supply, installation, commissioning & testing of bus bar chamber of size 700x 400x 250mm made up of MS sheet 3.15mm, powder coated with RAL 7032 code (siemens Grey) and aluminium strip of 50 x 6mm-04 Nos (600mm long) with MCCB 100 Amps, 25 kA, FP along with spreaded link for connection complete all as specified and directed by Engr-in- Charge.
70M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as showin in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregrate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. (Note :- The rate quoted include cost of min 7.5 metre earthing wire)
71Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 98904.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58469209
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maint And Rewiring To Internal Electrification With Complete Fitting And Fixture And Connected Allied Works In Otm Accn Of Zone A And B Under Ge(West)Pathankot
Basic Detail
Tender No GE/PKT-76/2026-27
Bidding Type Tender
Location
City Pathankot
State Punjab
Key Dates
Publish Date 09 Nov 2026
Submission Date 02 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Not Available
Document List
0bf07fab-d13c-42fd-a6e5-655985d4b2de.html
BOQ_895232.xls
Tender76.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

0bf07fab-d13c-42fd-a6e5-655985d4b2de.html

xls

BOQ_895232.xls

pdf

Tender76.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender