Tender For Addn / Altn To Toilet Of Bbj Flt, Provn Of Boundary Wall Alongwith Gate & Fencing In Rv Area And Provn Of Changing Room For Ground Crew Inside Hangar C Af Stn Palam Under Ge (Af) Palam Delhi Cantt-10
Tender Value
25.58 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
17 days left
EMD
51000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn / Altn To Toilet Of Bbj Flt, Provn Of Boundary Wall Alongwith Gate & Fencing In Rv Area And Provn Of Changing Room For Ground Crew Inside Hangar C Af Stn Palam Under Ge (Af) Palam Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame (without taking off shutters from the fames) area not exc. 1.5 sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frame (without taking off shutters from the fames) area exc. 1.5 sqm but n exc 4.0 sqm each complete all as specified and as directed. |
| 3 | Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water etc any description complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 5 | Dimolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding precast concrete articles complete all as specified and as directed. |
| 6 | M&L for powder coated aluminium door shutter having (150mm x 44mm x 2.85mm thick) bottom rail, (150 mm x 44mm x 2.85mm thick) middle rail, (100mm x44mm x 3mm thick) stile and top rail including necessary fitting joinery cleat, glazing, packing, snap beading (10mm x 10mm) powder coated aluminium handle 200 mm long (02 Nos) , 3 Nos 100 mm size chromium plated butt hinges, 2 Nos 200mm size Aluminium tower bolt and Aluminium body hydraulically door closer, designation No-3, universal type, weight between 61 to 80 kg etc inlcuding frame of section (100mm x 44mm x 3mm) and door shutter, bottom portion covered with 9mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination (colour/design approved by Engr-in-Charge) fixed to aluminium frame work and top portion covered with 5.00mm thick float glass and pattern, one mortice lock with shutter and fixing complete all as specified and as directed. |
| 7 | M&L for powder coated aluminium window/ ventilator shutter side hung having (75mm x 44mm x 2.85mm thick) stiles bottom rail and top rail including necessary ftting joinery cleat, glazing, packing, snap beading 10mm x 10mm, 2 nos of powder coated aluminium handle 150mm size, 2 nos of chromium pated butt hinges 75mm size and 2 nos of 100mm long aluminium tower bolt etc including frame of section (100mm x 44mm x 3mm) and including 5.00mm thick float glass and fixing complete all as specified and as directed. |
| 8 | S&F PVC solid door frame of size (50mm x 47mm) made out of 5mm wood grain printed PVC sheet and edges will be painted to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II complete all as specified and as directed. |
| 9 | S&F factory made solid PVC moulded door shutters with particle board core, 28 to 30 mm thick (stile:), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face complete all as per specification & drawing. |
| 10 | S&F 100mm butt hinges, cast brass, bright polished and fixed, type B-11 complete all as specified and as directed. |
| 11 | S&F 125mm size extruded brass handles, cast type, polished bright complete all as specified and as directed. |
| 12 | S&F 250mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and as directed. |
| 13 | Supply and fixing 200mm size brass barrel tower bolt, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 14 | S&F 15mm bore galvanised iron tubes, medium grade with all fittings and fixed complete to wall, including taking down existing pipes laid in floor/wall complete all as specified and as directed. |
| 15 | S&F 20 mm bore galvanised iron tubes, medium grade with all fittings and fixed complete to wall, including taking down existing pipes laid in floor/wall complete all as specified and as directed. |
| 16 | S&F 15mm angle stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed. |
| 17 | S&F in repair bib tap chromium plated, cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete all as specified and as directed. |
| 18 | S&F in repair pillar taps (swan neck) fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed . |
| 19 | S&F in repair for vitreous china wash hand basin, white flat, size (550 x 440)mm including cast iron brackets, waste coupling and waste pipe complete all as specified and as directed. |
| 20 | S&F in repair squatting pan WC Orissa pattern of size (580 x 440)mm white with integral foot rest with P or S trap including provn of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified and as directed. |
| 21 | S&F coloured vitreous china wash down one piece water closet with seat cover, hinges, accessories set, size (625 x 350 x 730)mm fitting with twin flush fitting with inlet ball valve float and handle, including fixing bolt, with bottom and cover and mild steel chromium plated hinging device complete fixed in repairs all as specified and as directed. |
| 22 | S&F in repair PVC seat cover for water closet pedestal pattern complete all as specified and as directed. |
| 23 | S&F in repair PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle, 10 ltr capacity including brakets complete all as specified and as directed. |
| 24 | S&F in repair PVC connection fibre, reinforced 45cm long with brass check nut and PVC washers at both ends complete all as specified and as directed. |
| 25 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 26 | S&F in repair chromium plated Jet spray for EWC 600mm long tube superior quality complete all as specified and as directed. |
| 27 | S&F soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and as directed. |
| 28 | S&F in repair Acrylic corner set of 3 pieces complete all as specifed and directed. |
| 29 | S&F brass chromium plated tubular towel rail 20 mm dia , D type 60 cm long between CP flanges complete all as specified and as directed. |
| 30 | S&F toilet Roll Holder cast copper alloy CP complete all as specified and as directed. |
| 31 | S&F in repair vitreous china urinal, flat back, white, complete including providing and fixing plugs, bedding against wall in CM(1:2) securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, including and fixing the flush pipe, grating with waste coupling, and union for discharge pipe. spreader etc, complete all as specified and as directed. |
| 32 | M&L for PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement, diameter of outlet is 75mm including taking out damaged floor trao in any type and position complete all as specified and as directed. |
| 33 | S&F (600mm x 450mm) size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 34 | S&F in repair 1000 ltr rotational moulded polyethylene water storage tank three layered white colour (Cylindrical vertical with closed top), hoisted & fixed in position with and including 20mm dia ball valve PVC high pressure, with polythene float and fly nut complete all as specified and as directed. |
| 35 | Demolition and breaking up drain pipes AC/PVC pipe n.exc 150 mm dia including all fittings complete all as specified and as directed. |
| 36 | S&F 110mm PVC (SWR) rain water pipes single socketed in any length with rubber ring joints and PVC clamps fixed to walls and floors complete all as specified and as directed. |
| 37 | S&F PVC (SWR) bends 110 mm dia complete all as specified and as directed. |
| 38 | Supply and fixing false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size (595mm x 595mm) and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel section (galvanised @ 120 gms, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and (15 x 32)mm made from 0.3mm thick sheet and cross T of size (15 x 32)mm made of 0.30 mm sheet, spaced between main T at 600 mm c/c to form a grid of (600 x 600)mm and wall angle of size (15 x 20)mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main T runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3 mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 kg/sqm complete all as specified and as directed. |
| 39 | M&L for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed. |
| 40 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer on plastered surfaces over 2mm thick cement base wall care putty complete all as specified and as directed. |
| 41 | M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 42 | M&L for virified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 43 | M&L for coloured glazed ceramic tiles of size (300 x 450)mm x7mm thick fixed with neat cement slurry as on vertical surface to wall pointed in white/coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 44 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match the shade of granite over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 45 | M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 46 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and as directed. |
| 47 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed. |
| 48 | Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 49 | Removing excavated material soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 50 | M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 51 | M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed. |
| 52 | M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 53 | Extra for forming for finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred stopped etc complete all as specified and as directed. |
| 54 | M&L for 15 mm thick rendering of Ready mix mortar of approved make on brick/ concrete surfaces on external walls, fascia, parapet and chajjas finished the surfaces even and fair including mixed with water proofing compound by weight as per manufacturer's instructions, including necessary scaffolding complete all as specified and as directed. Note:- WPC shall measured and paid seperately. |
| 55 | M&L for reinforced cement concrete (1:2:4) type B1 (using ( 20mm graded stone aggregate) as on footing, walls, plinth beams, tie beam, columns, roofs, landings balconies, footing, including necessary use and waste of form work complete all as specified and as directed. |
| 56 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 57 | Description all as per ser item No. 54.00 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and as directed. |
| 58 | Excavation in post holes each not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with around earth in layers not exceeding 25 cm thick, watering and removing surplus spoil to a distance not exceeding 50 m and making good surface all as specified and as directed. |
| 59 | S&F MS angle iron as in fencing posts, struts & \\"Y\\" angle holes drilled in for securing wire including cutting top to shape & with flat iron for securing wire mesh including all necessary drilling, bolting or riveting,weldings etc Fe-290 grade 165 complete all as specified and as directed. |
| 60 | S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n exc 5cm long dia of shank 5 to 10mm complete all as specified and as directed. |
| 61 | S&F mild steel round bar 10mm dia and over cut to length, bend to shape required including cranking, bending spirally for hopping for colours hooking ends and binding with a including security bolts, post and struts as in fencing including cutting top to shape as directed drilling holes notching for wire etc., complete all as specified and as directed. |
| 62 | Suply only chain link MS galvanised fencing of mesh size 50mm square with 10 gauge wire and not less than @2.30Kg per sqm complete all as specified and as directed. |
| 63 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 64 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 65 | M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in floor etc complete all as specified and as directed. |
| 66 | M&L for precast cement concrete louveres and jallies, 55mm thick (measured solid) in PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) set in cement mortar (1:4) including all mouldings but excluding frame complete all as specified and as directed. |
| 67 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and as directed. |
| 68 | M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of primer with and including over 2mm thick (avg thickness) cement base wall care putty complete all as specified and as directed. |
| 69 | M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade glossy finish over and including 25mm thick sand cusioning complete all as specified and as directed. |
| 70 | M&L for 25mm thick PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in floor, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 71 | M & L for RCC (nominal mix) (1:2:4) type B1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. |
| 72 | Use and waste of steel formwork to sides and soffits of floor or roof beams, beam launchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for rough finished surfaces of concrete complete all as specified and as directed. |
| 73 | M&L for 10mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on internal walls, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. |
| 74 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 75 | M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489-2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre /10 sqm over new surfaces complete all as specified and as directed. |
| 76 | M&L for vitrified tiles 8-10 mm thick, 1st quilaty (square/rectangular) polished, double charge shade, area of each tiles not exceeding 0.36 Sqm as in floors etc. set and jointed with neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 77 | Description all as per srl item no. 76.00 above but as in skirting over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 78 | S&F mild steel rolled section as in main and cross beams, hip and jack rafter, purlins where connected to common rafters and running rails and guides, fixed with angle cleats or other connecting plates etc conforming to Fe-410W (Gde E-250) Quality-A grade complete all as specified and as directed. |
| 79 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in anchorage blocks for holdfast in walling, set in cement mortar (1:4) with fair faces including chamfers weathering etc complete all as specified and as directed. |
| 80 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 81 | M & L for provding false ceiling of 12mm thick fine fissure board sharped finished mineral fiber acoustic false ceiling tiles with back of the duly sanded and finshed with a coat of protective paint and front duly finished false system of size (600 x 600)mm having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 W/WWC and humidity resistance of 95% fixed to true look PVC die KL -24 suspension system (Hot dipped a galvanised steel section) of exposed T Section consisting of perimeter wall angle of size (24 x 24)mm of thickness 0.45 mm c/c universal main runner of T Shape with double rotary siticing of size (38x25)mm of lengh 1200mm made from 0.33GS steel of lenght 3.60 mtr to be spced at (600 x 600mm size) c/c CRO runner T shape wtih double rotary siticing of size (30 x 24)mm of length 1200mm made 0.25mm thick GS sheet spaced @ 600mm c/c (600mm x 600mm) size complete all as specified and as directed by Engineer -in- Charge. |
| 82 | M&L for powder coated anodised aluminium cabin having (150mm x 44mm) x 2.85mm thick rail, (100mm x 44mm) x 3 mm thick stile and top rail including necessary fitting joinery cleat, glazing, packing, snap beading (10mm x 10mm), inlcuding frame of section (100mm x 44mm) x 3 mm thick and bottom portion covered with 9mm thick prelaminated particle board, on both sides with decorative choice lamination (colour/design approved by Engr-in-Charge) fixed to aluminium frame work and top portion covered with 5.5 mm thick float glass and pattern, with shutter and fixing complete all as specifies and directed by Engineer-in-Charge. |
| 83 | Supply only powder coated aluminium Deco Grill of Model / Design No. DG 104 (7.2mm x 4.2mm) including powder coated aluminium channel of size (30 x 12 x 1.5)mm for fixing Deco Grill complete all as specified and as directed. |
| 84 | Supply and fixing superior quality polished sheet glass mirror (looking glass) of 5.0 mm thickness, size (600mm × 1800mm), with neat bevelled or rounded edges. The mirror shall be securely mounted on a backing of 6 mm thick commercial plywood with an anodized aluminum section or high-quality PVC frame all around. To be fixed firmly to walls using heavy-duty PVC/rawl plugs, CP brass screws, and protective cup washers, complete with all corporate and structural adjustments as specified and directed by the Engineer-in-Charge. |
| 85 | M&L for mild steel pipe 25mm dia curtain road with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade complete all as specified and as directed. |
| 86 | Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 sqmm FRLSH (nominal area) IS 694 drawn through non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with GI saddles, GI screws, rawl plugs (concealed conduit/surface wiring in walls or roof) including Tee, Junction boxes and proper fixing of modular switches, sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 sqmm (Nominal area) FRLSH and connected to main earth dolly complete for following all as specified and as directed by Engr-in-Charge:- (a) One light / fan point controlled by one switch one way |
| 87 | (b) One socket outlet 5 Amp controlled by one switch on independent board. |
| 88 | (c) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete. |
| 89 | All as per Srl item No 86.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 sqmm stranded copper conductor cable PVC insulated FRLSH including earth wire 2.5 sqmm copper FRLSH conductor cable connected to earth dolly complete all as specified and as directed. |
| 90 | S&F switch modular 1 way 6 amps suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge. |
| 91 | S&F socket modular 6 amps 2/3 pin combined 2 module suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge. |
| 92 | S&F switch modular 1 way 16 amps suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge. |
| 93 | S&F socket modular 6/16 amps 2/3 pin combined 2 module suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Material and labour for submain wiring with two single core 1.5 sq mm PVC insulated FRLSH multistrand copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 1.5 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engr-In-Charge. Note:- Two core main wire, one core of earthing wire, PVC conduit and cutting chases shall be measured and paid as one run. |
| 95 | Description all as per ser item No. 94.00 here in before but two main single core of 2.5 sqmm and one earth single core of 1.5 sqmm complete all as specified and as directed. |
| 96 | Description all as per ser item No. 94.00 here in before but two main single core of 4.0 sqmm and one earth single core of 4.0 sqmm complete all as specified and as directed. |
| 97 | Description all as per ser item No. 94.00 here in before but two main single core of 10.0 sqmm and one earth single core of 10.0 sqmm complete all as specified and as directed. |
| 98 | Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. |
| 99 | Supply and fixing MCB, SPN, 40 Amp,10kA 'C' Curve complete all as specified and directed. |
| 100 | Supply and fixing MCB, SPN, 32 Amp,10kA 'C' Curve complete all as specified and directed. |
| 101 | S&F 400mm (16\\") sweep heavy duty oscillating wall mounted fan, complete with 100% copper motor, 90 degree oscillation, tilt adjustment, 3 speed pull cord regulator, thermal overload protection, powder coated metal gurad, mounting bracket, all fixing accessories including nuts, bolts, screws, anchor fasteners, PVC sleeves, connection with suitable size PVC insulated copper flexible wire (up to 1.5m), testing and commissioning complete in all respects as directed by the Engr-in-Charge. Make:- Orient Electric Wall 97 or equivalent as per list of makes. |
| 102 | S&F indoor decorative LED Battens - integrated type 20 watt 4 feet white/warm white 6500K fixture complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. |
| 103 | S&F exhaust fan made of sturdy Engineering plastic complete with louver shutter, voltage 230 Volt, 50 Hz, 1200 RPM, copper winding of sweep 300mm single phase motor, with nuts, bolts and washers, size of the bolt 15 cm long 12mm dia embeded in the wall including provision of PVC flexible copper conductor wire of size 23/0.0076 three core from ceiling rose to exhaust fan upto 1.5 mtr length for giving connection complete all as specified and directed. |
| 104 | S&F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by Engr–in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender