Tender For Special Repairs To Bldg No P-215 (Otm) At D Coy Depot Bn Meg & Centre Under Garrison Engineer (North) Bangalore
Tender Value
1.45 Crore
Estimated cost
Bid Submission
07 Dec 2026
20 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No P-215 (Otm) At D Coy Depot Bn Meg & Centre Under Garrison Engineer (North) Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Demoltion of Un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for etc., complete all as specified and as directed |
| 2 | Demolition of un-reinforced cement concrete and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each and making good the disturbed surfaces to match with adjoining surfaces etc., complete all as specified and as directed |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each and making good the disturbed surfaces to match with adjoining surfaces etc., complete all as specified and as directed |
| 5 | M&L for 100 mm thick plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub base etc., finished even and smooth without using extra cement complete all as specified and as directed |
| 6 | M&L for 25 mm thick plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in levelling course of flooring etc., complete all as specified and as directed |
| 7 | M&L for 75 mm thick plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregates as in plinth protection etc., finished even and smooth without using extra cement including filling sealing compound grade A in grooves complete all as specified and directed. |
| 8 | M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in CM (1:6), including dismantling existing floor etc., complete all as specified and as directed |
| 9 | M & L for Non-skid ceramic white tiles 7 to 8mm mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in CM (1:6), including dismantling floor, hearth or wall tiling etc complete all as specified and as directed |
| 10 | All as per item No 09 herein before but as in skirting /dado with backing coat 10 mm thick in CM (1:4) including dismantling wall tiling etc., complete all as specified and as directed |
| 11 | M&L for Sand filling under floors or in foundations including watering and consolidation etc., complete all as specified and directed . |
| 12 | M&L for Machine pressed precast cement concrete interlocking paver block with grey cement and no Pigments any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed . |
| 13 | M&L for Glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 X 350 X 7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat 10 mm thick CM (1:4) including dismantling wall tiling etc., complete all as specified and as directed |
| 14 | M & L for 20 mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 15 | M&L for Pre-cast Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregates as in solid block masonary exc 10 cm in width and setting in CM (1:6) including demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed. |
| 16 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed |
| 17 | M&L for rendering 5 mm thick in CM (1:3) over fair faces of ceiling concrete surface finished even and smooth without using extra cement etc., complete all as specified and as directed |
| 18 | M&L for rendering 10 mm thick in CM (1:6) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth without using extra cement etc complete all as specified and as directed |
| 19 | M&L for rendering 10 mm thick in CM (1:6) first layer and rendering 5 mm thick second layer in CM(1:4) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 20 | M&L for providing water proofing treatment to sunken portion of WCs, bath room etc., by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating as per following procedure including taking down existing treatment with PCC as in sunken protion of WC and removing beyond the premises of site complete all as specified & directed :- (I) Cleaning the entire surface and rendering 20mm thick at bottom surface in cement mortar (1:3) mixed with liquid water proofing compound finished even & smooth surface. (ii) Rendering15mm thick cement mortar (1:3) at side wall surface mixed with liquid water proofing compound finished even & smooth surface. |
| 21 | (iii) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (iv) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (v) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vi) Fill the sunken portyion with plain Cement concrete (1:5:10) type E-2 using 20mm granded brick aggregates as in sunken portion of WC(v) Ponding test for 100hours for leak/seepage proof. |
| 22 | M&L for Plain cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate as in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating and necessary formwork all as specified & directed |
| 23 | M&L for screed bed 10mm thick in CM (1:3) over concrete surface mixed with water proofing compound including taking down existing roof treatment along with cement plasartering etc., complete all as specified and as directed. |
| 24 | M & L for water proofing treatment over RCC roof slab as per following specificationr complete all as specified & directed :-(i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make the surface smooth(ii) Applying compatible oil bound bitumen primer @ 0.30 Kg/Sqm -contd/- |
| 25 | (iii) Laying 3 mm thick APP modified water proofing membrane weighing not less than 3.8 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap.(iii) Applying solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm.(iv) Pond test for 72 hours shall be carried out for dampness / leakage test. |
| 26 | Supply only water proofing compound (Liquid), ISI marked complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 27 | Supply only water proofing compound (Liquid), ISI marked complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender