Tender For Infrastructure Works For Surajkund International Crafts Mela -2027 (I.C Painting, Mud Plaster, Water Proofing,Thatch Work, Repair Of Boundary Wall And Tubewell And Other Allied Work)...
Tender Value
76.75 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
3 days left
EMD
1.53 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Infrastructure Works For Surajkund International Crafts Mela -2027 (I.C Painting, Mud Plaster, Water Proofing,Thatch Work, Repair Of Boundary Wall And Tubewell And Other Allied Work)...
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 12`-0` long ballies of 3` to 4` diameter (solid), in good condition, complete in all respects as per specifications and as directed by the Engineer-in-Charge. |
| 2 | Supply of heavy weight bamboo with root, 2` to 2.5` diameter (solid), 15`-0` long, in good condition,complete in all respects as per specifications and as directed by the Engineer-in-Charge. |
| 3 | Supply of nail 1.5` to 6` long complete in all respects as per specifications and as directed by the Engineer-in-Charge. |
| 4 | Making of new thatch huts where RCC column already exists at site Repair of wooden structure and change defective Bamboos 2` to 2½` and Ballies 3` to 4` , repair of Polythene, Patera (2x7’x5’) , Pullah (6’’ dia 6’ long), Nails of various sizes (1 ½’’ to 6’’ long), Ban (Moonjwala), Labour for thatching, labour for making skelton including, bamboos, loading, unloading of new thatch into tractor trolley at the site wherever required i/c cost of tractor trolley (tractor trolley includes fuel, driver etc.) and proper cleaning of the area comp. in all respect as per entire satisfaction of Engineer-incharge ( N.S) |
| 5 | Making of new thatch with ballies as column including Safeda ballies-3’’-4’’(12’ long), 3’’-4’’(18’ long), Heavy weight bamboos 2 `-2 ½ ‘’ dia (12’ long), 2’’-2 ½ ‘’ (15’ long), Polythene, Patera (2x7’x5’) , Pullah (6’’ dia 6’ long), Nails of various sizes (1 ½’’ to 6’’ long), Ban (Moonjwala), CC 1:1 ½:3 for grouting for ballies Labour for thatching, labour for making skelton, loading, unloading of new thatch into tractor trolley at the site wherever required i/c cost of tractor trolley (tractor trolley includes fuel, driver etc.) and proper cleaning of the area including earth work in excavation, brick work, Mud Plaster, painting on ballies and earth filling comp. in all respect as per entire satisfaction of Engineer-in-charge |
| 6 | Mud plaster12mm thick. with gobri leeping on floors including all materials (HSR no.15.54) |
| 7 | Numbering by paint on huts in Surajkund International Crafts Mela, including all materials, labour, tools, and equipment, complete in all respects as per the direction and to the entire satisfaction of the Engineer-in-Charge (EIC). |
| 8 | Providing and fixing of Submersible strip light IP 68 grade Submersible strip flex light IP 68 grade MAKE AQUA GRAPHICS complete in all respect as per satisfaction of EIC. |
| 9 | Reinstallation of existing fountains Fixing of pumps , lights, fittings, repair of lights OR CHANGE OFLIGHTING ,light controls, providing cable , cleaning of pools, change of anymalfunction parts, fine tuning and complete maintenance and further dismantlingat end of mela ( CHOTI CHAUPAL) i.c installation charge complete in all respect as per satisfaction of EIC. |
| 10 | Repair and Reinstallation of existing fountain atMela Office Fixing of pumps ,lights, fittings, CHANGE OF LIGHTING ,light controls, providing cable ,cleaning of pools, change of any malfunction parts, fine tuning and completemaintenance i.c installation charge complete in all respect as per satisfaction of EIC. |
| 11 | P/F of lights Controller Lights controller 12volt mixer RGB along with SMPS 12 Volt 20 ampere to be fitted in panel complete in all respect as per satisfaction of EIC. |
| 12 | Mud plaster 12mm thick with gobri leeping on wall including all materials. |
| 13 | [11.123]Wall painting with (bio grade)plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) Generally used in hospital buildings etc. complete as per Specifications. [Through Rate] |
| 14 | [11.5.4]12 mm cement plaster of mix : 4. 1:6 (1 cement: 6 fine sand) [Through Rate] |
| 15 | [11.57]Providing and laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc. complete in all respects as approved by the Engineer-In-Charge. [Through Rate] |
| 16 | [11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [Through Rate] |
| 17 | [11.60]Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. [Through Rate] |
| 18 | [11.70]`Extra for using White Cement based primer modified with high performance polymers, applied as an undercoat for exterior/interior cementitious surfaces before paint Technical Specifications: i) Degree of whiteness (in terms of reflectance) )93% ii) Fineness (Residue on 63 Micron Sieve) - Minimum 4.0 iii) Bulk Density - 0.8 to 0.9 kg/litreiv) Viscosity by Brookfield, 50rpm, Spindle no RV 05 at 25 - 300cP to 600cP v) Pot Life - Min. 180 minutes vi) Coverage after 1st coat - 80-100 sqft/kg vii) Adhesion cross-cut on 2 coat application after 48 hours - Min. 3B` [Through Rate] |
| 19 | [11.75.1]Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 1. One coat [Through Rate] |
| 20 | [11.86.1]Varnishing with varnish of approved brand and manufacture : 1. Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish [Through Rate] |
| 21 | [11.93.1]Finishing walls with water proofing cement paint of required shade : 1. New work (Two or more coats applied @ 3.84 kg/10 sqm) [Through Rate] |
| 22 | [12.157.2.2]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.2. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) [Through Rate] |
| 23 | [12.158.2]Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 2. Pre-laminated particle board with decorative lamination on both sides [Through Rate] |
| 24 | [20.114.2]Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor,Wooden Box etc as per site requirement complete in all respect. 2. 15 HP Motor [Through Rate] |
| 25 | [21.104.44]Supplying, erection, testing and commissioning of submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked including all accessories (like SS Pipes, SS Chain (Shackle Chain) ,SS Foundation Bolt, complete base frame, Monorail, Chain Guide Line, Auto Compiling, Duct Foot Bend (D/F Bend) etc. complete in all respect 44. Discharge Capacity (LPM) - 3500 Power Capacity (BHP) - 15 [through rate] |
| 26 | [30.27.1]Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 1. One or more coats on old work [Through Rate] |
| 27 | [30.28.1]Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1. One or more coats on old work [Through Rate] |
| 28 | [30.33.1]Polishing on wood work with ready made wax polish of approved brand and manufacture : 1. Old work [Through Rate] |
| 29 | [30.37.1]Finishing walls with Acrylic Smooth exterior paint of required shade : 1. Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface [Through Rate] |
| 30 | [30.88.1]Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 1. For pipes 100 to 250 mm diameter [Through Rate] |
| 31 | [30.94]Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, up to 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal and vertical tubes joint with cup and lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. [Through Rate] |
| 32 | [34.26]Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. [Through Rate] |
| 33 | [4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate] |
| 34 | [5.22]Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. [Through Rate] |
| 35 | [5.29.1]Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1. Of area 3 sq. metres and below [Through Rate] |
| 36 | [5.29.2]Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2. Of area beyond 3 sq. metres [Through Rate] |
| 37 | [5.37]Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. [Through Rate] |
| 38 | [5.9]Demolishing thatch roofing including mats, bamboo, Jaffri etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. [Through Rate] |
| 39 | [6.14.1]Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) [Through Rate] |
| 40 | [6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate] |
| 41 | [6.30.21]Centering and shuttering including strutting, propping etc. and removal of form for 21. Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick [Through Rate] |
| 42 | [6.33.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more [Through Rate] |
| 43 | [7.20.1]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) [Through Rate] |
| 44 | [9.10.1]Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 1. With residual type petroleum bitumen of grade VG -10 [Through Rate] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender