Tender For Repair ,Renovation And Maintainance Of The Micro Composting Plant At Geroge Road Near Tharuvai Ground - Unit 01 & Unit 02 In East Zone Thoothukudi City Municipal Corporation
Tender Value
11.80 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
11800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair ,Renovation And Maintainance Of The Micro Composting Plant At Geroge Road Near Tharuvai Ground - Unit 01 & Unit 02 In East Zone Thoothukudi City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Fixing of LED Flood Light 100W with Integrated Driver .. Including all cost and conveyance of all material charges labour charges etc completed.., |
| 2 | Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) SD 18 |
| 3 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications . |
| 4 | Supplying and fixing in position best quality approved PVC Screw Down Tap Heavy Type 15mm dia etc., complete complying with standard specifications |
| 5 | Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW Round blocs on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting (SD87) |
| 6 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter |
| 7 | Supply and providing 500 litres capacity Priming Tank made up of PVC. including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 8 | Wiringw ith 2x1.5sq.mm PVC insulated SC unsheathed FRL S copperconductor of 1100V grade insuitable PVC rigid pipe on wall and ceilingw ith PVC accessories with 150x 100x 113mm TW switch boxfor5 A3 pinnon inter lockin gWall socket with 5A flush types witch with painting of suitable colour with continuou searth wire connectionof 1.5sq.mm copper wire for open PVC plug point SD 37 |
| 9 | Supplying and fixing of SS Sink of size 1200 x 550 x 180m etc, complete complying with standard specification and as directed by the departmental officers |
| 10 | Supplying and fixing in position MS Manhole Cover size 60 x 60cm (HeavyDuty) with Frame in Cement Mortar 1:3(One part of Cement and Three part of Plastering Sand(P-Sand)),of best approved quality and as per standard specifications etc.,complete. |
| 11 | Supplying and fixingin position best quality PVC soil/ waste pipes of various dia having 6kg/sq.cm. pressure BIS markand providing leak proof joints usingPVC adhesives including fixing to thewall with special PVC/MS clamp, teak woodplugs, brass screws, etc., and making connection toall sanitary fittings,dismantling masonry/ RCC works wherever foundnecessary and makingthe good dismantled portion to the original condition, including testing for any leakages, etc., complete complyingwith standard specifications. (The PVC pipes shouldbegot approvedby the Executive Engineer before use onworks). The rate for earthwork excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 12 | Segregation Ventilator Pipe 75mm |
| 13 | 100mm PVC Pipe |
| 14 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirmingtoBISandprovidingleakproof jointsincludingfixing to the walls and giving connection to thePVCsoil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original conditionetc., completecomplyingwithstandardspecifications. (ThePVCspecialsshouldbegot approved by the Executive Engineer before use on works). |
| 15 | 75mm Elbow |
| 16 | 75mm tee |
| 17 | Internal Water Supply Arrangements using PVC pipes and PVC specials Supplying, laying and jointing PVC pipes (having working pressure 10kg./sq.cm)ofapproved quality and best variety conforming toBIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teakwood plugs,PVC clamps and screws making holes on the wall (or drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply Above ground level.-(25mm DIA ) |
| 18 | Painting Old iron works suchas steeldoors, windows, ventilators, windowbars, balustradesetc., with Tow coats of best approved first quality and colour of synthetic enamelpaint in all floor setc.,complete complying with standard specification and as directed by the departmental officers. (The make, qualitya nd colour of paint shouldbe got approved by the Executive Engineer be foreuseon works.) |
| 19 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental |
| 20 | Repair and maintenance of Pulverizing Machine having an output Capacity 1 to 2 tonnnes per hr, ,Inputfeeding size of 100mmx12mm,for efficient cutting blade with 22 nospulverizing 22 nos. The blade of material NI-Hard chrome, usage application ,used to shred all farm wastes such as coconut leaves, palm leaves, bananawaste, morning tress, wet leaves, dry leaves Including all cost and conveyance of all material charges labour charges etc completed.., |
| 21 | Repair and maintenance of Shredder machine having an output Capacity 1 to2 tonnnes per hr,,Input feeding size of 530mmx350mmx270mm,for efficient cuttingblade with 6 nos ,pulverizing 22 nos. The blade ofmaterial NI-Hard chrome ,blade dimension cutting280mmx80mmx12mm. usage application , used toshred all farm wastes such as coconut leaves, palmleaves, banana waste, morning tress, wet leaves,dry leaves Including all cost and conveyance of all material charges labour charges etc completed.., |
| 22 | Repair and maintenance of BELT CONVEYOR Feeder ConveyorModel GE-CB 7Conveyor Function FeederConveyor Length 15000mmConveyor Width 650mmConveyor Thickness 5mmConveyor Paint Single Coated PaintConveyor General Service Including all cost and conveyance of all material charges labour charges etc completed.., |
| 23 | Providing of learning art work using apporved qulality Painting including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender