Tender For Nctps Ii - M I Circle - Bm Division - Unit I 600Mw Boiler - Supply And Erection Of Insulation At Boiler I Pass, Ii Pass, Critical Pipe Lines, Ring Header, Burners, Valves And Airpreheater During Annual Overhaul Period Of 2026 - 27.
Tender Overview
Project Description
Tender for Nctps Ii - M I Circle - Bm Division - Unit I 600Mw Boiler - Supply And Erection Of Insulation At Boiler I Pass, Ii Pass, Critical Pipe Lines, Ring Header, Burners, Valves And Airpreheater During Annual Overhaul Period Of 2026 - 27.
BOQ
| Sl. No. | Item Description |
| 1 | Removal & Refixing of Insulation :This work involves removal of insulation and refixing with new / old insulaiton material in Burner, Valves, drain lines etc., Charges inclusive of cost of T&P's and consumables. Charges for 75mm thick : |
| 2 | Removal & Refixing of Insulation :This work involves removal of insulation and refixing with new / old insulaiton material in ECO ducts, Airpreheater etc., Charges inclusive of cost of T&P's and consumables. Charges for 150mm thick : |
| 3 | Removal & Refixing of Insulation :This work involves removal of insulation and refixing with new / old insulaiton material in Boiler pressure parts, and Critical pipe pipe lines etc., Charges inclusive of cost of T&P's and consumables. Charges for 210mm thick : |
| 4 | Removal & Refixing of Insulation in Ring Header :This work involves removal of insulation and refixing with new / old insulaiton material in Ring Header (LHS & RHS) etc., Charges inclusive of cost of T&P's and consumables. Charges for 210mm thick : |
| 5 | Removal & Refixing of cladding sheet :This work involves fixing of G.I Sheet with new / old G.I Sheet over insulation done in Boiler pressure parts, Ring Header, Critical pipe pipe lines, Burners, Valves, Oil lines, ECO ducts and Airpreheater etc., Charges inclusive of cost of T&P's and consumables. |
| 6 | Arresting of cladding Sheet with M.S fin plates:This work consists of gas cutting of M.S plates of various size from 100 to 300 mm plates into required length to suit to the site requirement, grinding of fin plates, welding arrangements for welding of fin plates, welding arrangment for welding of fin plates in the boiler structure I beams and channels to arrest the G.I sheet in Boiler I & II pass Buckstay area. Charges inclusive of T&P's and consumables. |
| 7 | Charges for providing temporary scaffolding for positioning, aligning and welding of scaffolding materials dismantling the temporary scaffolding after completion of works. Charges inclusive of T&P's and consumables. |
| 8 | Charges for surface preparation and two coat of Lumerous - HR - 47 Aluminium painting on boiler side wall tubes, including cost of Lumerous - HR - 47 - Aluminum paint, consumables and T&P's etc., |
| 9 | Charges of providing of MS mesh 6mm x 100 mm x 100 mm, work involves welding of MS mesh at Boiler bottom ring header area (Charges inclusive of MS mesh, consumables and T&P's etc.,) |
| 10 | Complete removal of the damaged wool and other items : This work involves complete removal of the damaged wool from pipes, tubes, Wall panels and removing scale, rust thoroughly & cleaning of above surfaces gathering removed waste wool, debris and other unwanted materials from the respective floor to O mtr El and transporting the material for away from the site as per the Engineer in charge instruction and location. Charges inclusive of consumables and T&P's etc., |
| 11 | Supply of Lightly resin bonded wool mattresses of 60mm thick, confirming to IS 8183 of issue of with 1/2\\" x 23 swg wire setting at single side. Bulk density - 150 kg/cub.mtr. Material : Basalt Rock packed in HDPE bags. Size : 1.52m x 1.22m x 60mm thick. Including P&F, F&I and unloading charges |
| 12 | Supply of Lightly resin bonded wool mattresses of 75mm thick, confirming to IS 8183 of issue of with 1/2\\" x 23 swg wire setting at single side. Bulk density - 150 kg/cub.mtr. Material : Basalt Rock packed in HDPE bags. Size : 1.52m x 1.22m x 75mm thick. Including P&F, F&I and unloading charges |
| 13 | Insulation MS pin. Size : 6mm x 225mmMaterial : IS 2062Including P&F, F&I and unloading charges |
| 14 | Insulation MS square plate. Size : 70mm x 70m x 2mmMaterial : IS 2062Including P&F, F&I and unloading charges |
| 15 | GI Holding strip. Size : 65mm x 652m x 2mmMaterial : IS 2062Including P&F, F&I and unloading charges |
| 16 | GI Corrugated Sheet Size : 920mm x 1830mm x Thickness 18 swg. Material : GI. Including P&F, F&I and unloading charges |
| 17 | MS Sheet 2mm thk. Required Size : 2500mm x 200mm x 2 thk. Material : MS. Including P&F, F&I and unloading charges |
| 18 | GI Plain sheet Required Size : 2500mm x 1000mm x Thk. 0.63mm Galvanized coating mass : 120g/m2, Make : JSW. Including P&F, F&I and unloading charges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
TodayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender